• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.43-50
• /
• 2016

NAND flash based storage devices adopts multi-channel and multi-way architecture to improve performance using parallel operation of multiple NAND devices. However, multiple NAND devices consume higher current and peak power overlap problem influences on the system stability and data reliability. In this paper, current waveform is measured for erase, program and read operations, peak current and model is defined by profiling method, and estimated probability of peak current overlap among NAND devices. Also, system level TLM simulator is developed to analyze peak overlap phenomenon depending on various simulation scenario. In order to remove peak overlapping, token-ring based simple power management method is applied in the simulation experiments. The optimal peak overlap ratio is proposed to minimize performance degradation based on relationship between peak current overlapping and system performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.3
• /
• pp.227-234
• /
• 2014

Fuel consumption rates of electric vehicles strongly depend on their battery performance. Because the battery performance is sensitive to the operating temperature, temperature management of the battery ensures its performance and durability. In particular, the temperature distribution among modules in the battery pack affects the cooling characteristics. This study focuses on the thermal modeling of a battery pack to observe the temperature distribution among the modules. The battery model is a prismatic model of 10 NiMH battery modules. The thermal model of the battery consists of heat generation, convective heat transfer through the channel and conduction heat transfer among modules. The heat generation is calculated by the electric resistance heat during the charge/discharge state. The model is used to determine a strategy for proper thermal management in Electric vehicles.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.335-339
• /
• 2000

A $1.31/1.55\mu\textrm{m}$ coarse WDM opncal dIrectional coupler that conslsls of two idenlical straight channel waveguides in BK7 glass has been fabricated. The separatIOn between two channel waveguides is $8\mu\textrm{m}$ and the wavegu.ide width is $4\mu\textrm{m}$ . Especlally, we assumed that the index profile is Gaussian function and complementary error function in the width direction and depth direction, respectrvely. This directional coupler operating at $1.31/1.55\mu\textrm{m}$ with crosstalk of 18dB is demonstrated and has the 16 mm long length with 12.6 mm coupling region.region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.26-33
• /
• 2005

Exact prediction of resource demands for future calls enhances the efficiency of the limited resource utilization in resource reservation methods for potential calls in wireless IP networks. In this paper, we propose a LMS-Wiener resource(bandwidth) prediction for future handoff calls, and then an the proposed method is compared with an existing Wiener-based method in terms of prediction error through our simulations. In our simulations, we assume that handoff call arrivals follow a non-Poisson process and each handoff call has an non-exponentially distributed channel holdingtime in the cell, considering that handoff call arrival pattern is not Poisson distribution but non-Poisson for long periods of time in wireless picocellular IP networks. Simulation results show that the prediction error in the proposed method converges to the lower value while in an existing method increase as time is passed. Therefore we may conclude that the proposed method improves the efficiency of resource utilization by more exactly predicting resource demands for future handoff calls than an existing method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.422-428
• /
• 2011

In this paper, we introduce system and channel modeling for an underwater ad hoc acoustic network with n regularly located nodes， and then analyze capacity scaling laws based on the model. A narrow-band model is assumed where the carrier frequency is allowed to scale as a function of n. In the network, we characterize in attenuation parameter that depends on the frequency scaling as well as the transmission distance. A cut-set upper bound on the throughput scaling is then derived in extended networks having unit node density. Our result indicates that the upper bound is inversely proportional to the attenuation parameter, thus resulting in a power-limited network. Furthermore, we describe an achievable scheme based on the simple nearest-neighbor multi-hop (MH) transmission. It is shown under extended networks that the MH scheme is order-optimal for all the operating regimes expressed as functions of the attenuation parameter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.771-774
• /
• 2010

In this paper, BER performance of LDPC(Low-Density Parity-Check) decoder for WiMAX is analyzed, and optimal design conditions of LDPC decoder are derived. The min-sum LDPC decoding algorithm which is based on an approximation of LLR sum-product algorithm is modeled and simulated by Matlab, and it is analyzed that the effects of LLR approximation bit-width and maximum iteration cycles on the bit error rate(BER) performance of LDCP decoder. The parity check matrix for IEEE 802.16e standard which has block length of 2304 and code rate of 1/2 is used, and AWGN channel with QPSK modulation is assumed. The simulation results show that optimal BER performance is achieved for 7 iteration cycles and LLR bit-width of (8,6).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.405-409
• /
• 2009

In this paper, the effects of LLR (Log-Likelihood Ratio) approximation on LDPC (Low-Density Parity-Check) decoder performance are analyzed, and optimal design conditions of LDPC decoder are derived. The min-sum LDPC decoding algorithm which is based on an approximation of LLR sum-product algorithm is modeled and simulated by MATLAB, and it is analyzed that the effects of LLR approximation bit-width and maximum iteration cycles on the bit error rate (BER) performance of LDCP decoder. The parity check matrix for IEEE 802.11n standard which has block length of 1,944 bits and code rate of 1/2 is used, and AWGN channel with QPSK modulation is assumed. The simulation results show that optimal BER performance is achieved for 7 iteration cycles and LLR bit-width of (7,5).

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.2
• /
• pp.79-86
• /
• 2024

In this paper, a novel visual tracking method which can utilize the context of object regions is presented. Conventional methods have the inherent problem of treating all candidate regions independently, where the tracker could not successfully discriminate regions with similar appearances. This was due to lack of contextual modeling in a given scene, where all candidate object regions should be taken into consideration when choosing a single region. The goal of the proposed method is to encourage feature exchange between candidate regions to improve the discriminability between similar regions. It improves upon conventional methods that only consider a single region, and is implemented by employing the MLP-Mixer model for enhanced feature exchange between regions. By implementing channel-wise, inter-region interaction operation between candidate features, contextual information of regions can be embedded into the individual feature representations. To evaluate the performance of the proposed tracker, the large-scale LaSOT dataset is used, and the experimental results show a competitive AUC performance of 0.560 while running at a real-time speed of 65 fps.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.47-55
• /
• 2010

The power line communication channel has characteristic variation problems which are caused by load. The spread spectrum technique has been used to overcome these problems. One of that is the direct sequence spread spectrum(DS/SS) system which is not necessary to additional hardwares. The BER of DS/SS system is decreased by longer length of PN code, but data transfer rate is decreases, so data transfer rate is hard to satisfies their own specifications especially in narrowband PLC systems. Spread Spectrum system with Dual-processing Gain tries to reflect cyclic characteristics of power line noise. But that system assumes that shapes of power line channel are symmetrical with respect to the 1/4 point of main frequency(60Hz in Korea), therefore cannot achieves various shapes of real power line noise. Thus in this paper, noise adaptive DS/SS system which PN code is changed by noise levels for various channel noises is proposed and simulated. The different kinds of noises are modeled and measured for simulation, the proposed system is verified that has lower data transfer rate and lower error rate than conventional system by simulation results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.25-36
• /
• 2016

The goal of the SmartGrid is to maximize energy efficiency by exchanging bi-directional real-time power information with the help of ICT(Information and Communication Technology). In this paper, we propose a "JRS-MS" (Joint Routing and Scheduling for Multi-channel SmartGrid) algorithm that uses numerical modeling methods in IEEE 802.11s based STDMA multi-channel SmartGrid NAN networks. The proposed algorithm controls the amount of data transmission adaptively at the link layer and finds a high data-rate path which has the least interference between traffic flows in multi-channel SmartGrid NAN networks. The proposed algorithm improve transmission performance by enhancing network utilization. By comparing the results of performance analysis between the proposed algorithm and the JRS-SG algorithm in the previous paper, we showed that the JRS-MS algorithm can improve transmission performance by maximally utilizing given network resources when the number of flows are increasing in the multi-hop NAN wireless mesh networks.