• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1113-1116
• /
• 2005

Using COMSAT which provides multi-beam switching function, the optimal transmission channel environment which provides the high data rate communication are proposed in this paper. Also the link budget for communication transponder of COMSAT is designed. Based on the channel modeling for group delay, non-linear and gain flatness characteristics, the system performances which provide various data rate services were analyzed in Ka-band satellite channel. As the transmission data rate is increased, the degradation due to these channel characteristics is severely increased. The linear component of group delay and the AM-AM component of non-linear characteristics severely affect the system performance. To efficiently provide the various service via the same transmission system it is necessary to equalize the primary impairment factors. The optimum operating points of HDR satellite transmission system are implemented and operated by considering the analyzed results on channel characteristics.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.2
• /
• pp.141-145
• /
• 2009

A C-to-SystemC synthesizer which processes the input behavior according to high-level synthesis, and then transforms the synthesis result into SystemC module code is implemented in this paper. In the synthesis process, the input behavioral description in C source code is scheduled using list scheduling algorithm and register allocation is performed using left-edge algorithm on the result of scheduling. In the SystemC process, the output from high-level synthesis process is transformed into SystemC module code by combining it with SystemC features such as channels and ports. The operation of the implemented C-to-SystemC synthesizer is validated through simulating the synthesis of elliptic wave filter in SystemC code. C-to-SystemC synthesizer can be used as a part of tool-chain which helps to implement SystemC design methodology covering from modeling to synthesis.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.33-39
• /
• 2019

In this paper, we propose a parametric model for analyzing the motion information obtained from the acceleration sensors to measure the activity of the human body. The motion of the upper body and the lower body does not occur at the same time, and the motion analysis method using a single motion sensor involves a lot of errors. In this study, the 3-axis accelerometer is attached to the arms and legs, the body's activity data are measured, the momentum of the arms and legs are calculated for each channel, and the linear predictive coefficient is obtained for each channel. The periodicity of the upper body and the lower body is determined by analyzing the correlation between the channels. The linear predictive coefficient and the periodic value are used as data to measure the type of exercise and the amount of exercise. In the proposed method, we measured four types of movements such as walking, stair climbing, slow hill climbing, and fast hill descending. In order to verify the usefulness of the parameters, the recognition results are presented using the linear predictive coefficient and the periodic value for each motion as the neural network input.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.95-100
• /
• 2021

If we know the location of the hull block and the welding feeder in the shipyard, we can easily obtain the location information of the worker. That data is very useful for implementing a workplace safety monitoring system. However, it is difficult to apply a fixed communication network to the workplace due to the specificity of the hull structure and welding process. In this study, inductive power line communication, which can replace dedicated communication line, was reviewed. A ferrite core was used as an inductive coupler to be installed on the power cable of the welding machine, and a nano-crystalline core was applied as a coupler to be fastened to the support rod of the metal block. In order to visualize the operating principle of the proposed couplers, 3D modeling and finite element analysis were performed with the COMSOL AC/DC module. In the communication performance test using an aluminum profile, when the communication channel was formed by the contact of the welding electrode, the bandwidth was kept above 6 Mbps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1321-1329
• /
• 2019

With the development of social information networks, the marketing methods are also changing in various ways. Unlike successful marketing methods based on existing celebrities and financial support, Influencer-based marketing is a big trend and very famous. In this paper, we first extract influencer features from more than 54 YouTube channels using the multi-dimensional qualitative analysis based on the meta information and comment data analysis of YouTube, model representative themes to maximize a personalized video satisfaction. Plus, the purpose of this study is to provide supplementary means for the successful promotion and marketing by creating and distributing videos of new items by referring to the existing Influencer features. For that we assume all comments of various videos for each channel as each document, TF-IDF (Term Frequency and Inverse Document Frequency) and LDA (Latent Dirichlet Allocation) algorithms are applied to maximize performance of the proposed scheme. Based on the performance evaluation, we proved the proposed scheme is better than other schemes.

• Journal of IKEEE
• /
• v.15 no.2
• /
• pp.179-189
• /
• 2011

This paper presents an SVC based multi-channel transmission technique. Transmission of high definition multimedia and its service efficiency can be significantly improved by the proposed method. In this method, the HD stream is divided into the two layer streams, i.e., a base layer stream and an enhancement layer stream. The divided streams are transmitted through a primary channel and an auxiliary channel, respectively. The proposed technique provides a noble mode switching technique which enables a seamless service of HD multimedia even under the conditions of abrupt and intermittent deterioration of the auxiliary channel. When the enhancement layer stream is disrupted by the channel monitoring in the mode switching algorithm, the algorithm works further to maintain the spatial and time resolution of the HD multimedia by upsampling and interpolating the base layer stream, consequently serving for the non disrupted play of the media. Moreover, the adoption of an adaptive switching algorithm significantly reduces the frequency of channel disruption avoiding the unnecessary switching for the short period variations of the channel. The feasibility of the proposed technique is verified through the simulation study with an example application to the simultaneous utilization of both Ku and Ka bands for HD multimedia broadcasting service. The rainfall modeling and the analysis of the satellite channel attenuation characteristics are performed to simulate the quality of service performance of the proposed HD broadcasting method. The simulation results obtained under a relatively poor channel (weather) situations show that the average lasting period of enhancement layer service is extended from 9.48[min] to 23.12[min] and the average switching frequency is reduced from 3.84[times/hour] to 1.68[times/hour]. It is verified in the satellite example that the proposed SVC based transmission technique best utilizes the Ka band channel for the service of HD broadcasting, although it is characterized by its inherent weather related poor reliability causing severe limitations in its independent application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.724-729
• /
• 2007

In this paper, we consider a joint optimization of transmitter and receiver in additive cyclostationary noise with zero forcing criterion. We assume that the period of the cyclostationary noise is the same as the inverse of the symbol transmission rate and that the noise has a positive-definite autocorrelation function. The data sequence is modeled as a wide-sense stationary colored random process and the channel is modeled as a linear time-invariant system with a frequency selective impulse response. Under these assumptions and a constraint on the average power of the transmitted signal, we derive the optimum transmitter and receiver waveforms that jointly minimizes the mean square error with no intersymbol interference. The simulation results show that the proposed system has a better BER performance than the systems with receiver only optimization and the systems with no transmitter and receiver optimization.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.102-106
• /
• 2016

With the popularity of smart phones and the help of high-speed wireless communication technology, high-quality multimedia contents have become common in mobile devices. Especially, the release of Oculus Rift opens a new era of virtual reality technology in consumer market. At the same time, 3D audio technology which is currently used to make computer games more realistic will soon be applied to the next generation of mobile phone and expected to offer a more expansive experience than its visual counterpart. This paper surveys concepts, algorithms, and systems for modeling 3D sound virtual environment applications. To do this, we first introduce an important design principle for audio rendering based on physics-based geometric algorithms and multichannel technologies, and introduce an audio rendering pipeline to a scene graph-based virtual reality system and a hardware architecture to model sound propagation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1677-1688
• /
• 1998

In this paper, we analyze the performance of a DS-CDMA system employing adaptive adaptive array antenna technology at base-station. For the analysis the receiving architecture of a multiple team adaptive base-station array antenna is proposed as a major system omponent, and signal to interference and noise ratio(SINR) on the proposed architecture is developed. We show that the perfomance enhancement of the CDMA system is represented as great reduction of interfreence by employing an array antenna capable of resolving the angular distribution of the mobile users as seen at the ase-station. The energy associated with each mobile or a group of mobiles is thus confined within the addressed volume, greatly reducing the amount of co-channel interference experienced from and by neighboring co-channel cells. In order to ascertain the benefits of such an antenna, a theoretical approach, which eis based on the conventional and proposed antenna systems in a typical mobile radio environment, is adopted. Finally computer simulation results show the insight into how the adaptive array antenna operates when used in conjunction with DS-CDMA and illustrate the potential benefits in the SINR point of view.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.43-50
• /
• 2016

NAND flash based storage devices adopts multi-channel and multi-way architecture to improve performance using parallel operation of multiple NAND devices. However, multiple NAND devices consume higher current and peak power overlap problem influences on the system stability and data reliability. In this paper, current waveform is measured for erase, program and read operations, peak current and model is defined by profiling method, and estimated probability of peak current overlap among NAND devices. Also, system level TLM simulator is developed to analyze peak overlap phenomenon depending on various simulation scenario. In order to remove peak overlapping, token-ring based simple power management method is applied in the simulation experiments. The optimal peak overlap ratio is proposed to minimize performance degradation based on relationship between peak current overlapping and system performance.