• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.471-475
• /
• 1997

We investigate the gain dynamics of erbium-doped fiber amplifiers during single- and multi-channel amplification. Power transients due to the changes in the number of channels in the amplifier chain are measured. We successfully suppress power transients by using a fast pump control circuit with<$\mu$s response time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.383-388
• /
• 1998

이동통신에서, 신호의 페이딩을 보상하기 위하여 pilot symbol assisted modulation(PSAM)에 대한 많은 연구가 진행 되어왔다. 본 논문에서는 최대비합성다이버시티를 사용하는 PSA-QAM에서 전력증폭기 비선형성의 효과를 분석하였다. 먼저, PSAM성능의 한계를 구하기 위하여, 페이딩에 대한 완벽한 정보가 주어진 상태에서 최대비합성다이버시티를 갖는 QAM의 이론적 성능을 분석하였다. 실제 PSAM에서, 페이딩에 대한 정보는 파일럿 심볼의 보간에 의하여 얻어진다. 오차의 평균전력을 최소화하는 보간필터를 사용하여 필터의 탭수, 파일럿 심볼프레임 주기, 도플러 주파수가 성능에 미치는 영향을 분석하였다. 비선형 전력증폭기 AB, B, C급의 AM/AM, AM/PM 특성을 성능분석에 고려하였다. 비선형 보상기술인 Cartesian Feedback Loop (CFB) 이용하여 AWGN 채널과 Rayleigh 페이딩 채널에서 비선형 전력증폭기 종류에 따른 성능변화를 나타내었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.8 s.338
• /
• pp.53-60
• /
• 2005

Recently, sub-micron CMOS technologies have taken the place of III-V materials in a number of areas in integrated circuit designs, in particular even for the applications of gjgabit optical communication applications due to its low cost, high integration level, low power dissipation, and short turn-around time characteristics. In this paper, a four-channel transimpedance amplifier (TIA) array is realized in a standard 0.35mm CMOS technology Each channel includes an optical PIN photodiode and a TIA incorporating the fully differential regulated cascode (RGC) input configuration to achieve effectively enhanced transconductance(gm) and also exploiting the inductive peaking technique to extend the bandwidth. Post-layout simulations show that each TIA demonstrates the mid-band transimpedance gain of 59.3dBW, the -3dB bandwidth of 2.45GHz for 0.5pF photodiode capacitance, and the average noise current spectral density of 18.4pA/sqrt(Hz). The TIA array dissipates 92mw p in total from a single 3.3V supply The four-channel RGC TIA array is suitable for low-power, high-speed optical interconnect applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6B
• /
• pp.568-574
• /
• 2009

320km optical transmission link for 128 channel DWDM (dense wavelength-division-multiplexing) signals is simulated and fabricated. An optical fiber amplifier for the link is composed of a distributed Raman amplifier and dual C/L-band EDFAs which are optimized for the performances of an optical amplifier obtained from the simulation. Gain and NF of the optimized EDFAs are above 19dB and below 7.5dB, respectively. The resultant OSNRs (optical signal to noise ratios) of the link are average 25dB on each band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1666-1671
• /
• 2022

The structure of a high-power gain-flattened long wavelength band (L-band) optical amplifier was optimized, which was implemented for 64-channel wavelength division multiplexed optical signals with a channel spacing of 50 GHz. The output characteristics of this L-band amplifier were measured and analyzed. The amplifier of the optimized two-stage amplification configuration had a flattened gain of 20 dB within 1 dB deviation between 1570 and 1600 nm for -2 dBm input power condition. The noise figure under this condition was minimized to within 6 dB in the amplification bandwidth. The gain flattening was realized by considering only the characteristics of gain medium in the amplifier without using additional optical or electrical devices. The proposed amplifier consisted of two stages of amplification stages, each of which was based on the erbium-doped fiber amplifier (EDFA) structure. The erbium-doped fiber length and pumping structures in each stage of the amplifier were optimized through experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8A
• /
• pp.1367-1377
• /
• 2001

고전력 증폭기의 비선형성, 수신 주파수 편차 및 심볼 타이밍 편차가 모두 존재하는 실제 IEEE 802.11a 무선 LNA 시스템의 성능을 분석하였다. 이러한 시스템에서 데이터가 OFDM 변조된 후 주파수 선택적 Rayleigh 페이딩 채널을 통하여 전송될 때의 비트 오류율을 구하였다. 증폭기의 최대 출력 전력 대 평균 출력 전력비가 6dB이며 주파수 편차가 0.01이고 심볼 타이밍 편차가 2 샘플링 주기 시간인 경우에, 이 무선 LAN 시스템에서 10-5의 비트 오류율을 얻기 위하여 필요한 $E_{b}$ /$N_{o}$ 의 크기는 대략 20~24dB로 분석되었다. 이와 같은 실제 시스템과 정확한 채널 추정, 선형 증폭기, 정확한 주파수 동기 및 심볼 동기 가정의 이상적인 시스템간의 성능을 비교한 결과, 같은 크기의 비트 오류율을 얻기 위하여 이 실제 시스템에서 대략 1~3dB 정도의 $E_{b}$ /$N_{o}$ 가 더 소요된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.389-391
• /
• 2011

This paper has been studied about design of linear 25Watt Power amplifier for VDR(VHF Data Radio). VDR's frequency band is 117.975~137MHz, and CSMA(Carrier Sense Multiple Access), D8PSK(Differential Eight Phase Shift Keyed), 25KHz's channel bandwidth use. It also stated in DO-281A MOPS output power, symbol constellation error, spurious emissions, adjacent channel power must be met. HPA is designed to meet DO-281A standard.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.755-760
• /
• 2013

The electromagnetic compatibility and its effects, and the system design considerations in space environment are studied in this paper using Multipator. The system level EMC test results of digital channel amplifier(DCAMP), its affects upon the H/W improving methods regarding its over exceed value of EMC specification are discussed. These analysis values and test results can be used as the criteria for the selection of EMC requirements and of the MILSATCOM system design.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.4
• /
• pp.51-58
• /
• 2004

Push-pull structure with balun transformer is presented for load modulation technique which improves the overall efficiency of power amplifier Under the assumption that output impedance of fumed-off amplifier is high, conventional Doherty amplifier is composed of impedance inverter and peaking amplifier, of which operation is controlled by the input power level. In many case, however, impedance of 'off'amplifier is very low due to matching network or parasitic output capacitance. This paper introduces novel load modulation technique which uses low output impedance of 'off'amplifier. Experimental results show that good linearity and efficient!'enhancement of the proposed push-pull structure

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.179-182
• /
• 1999

전력 증폭기의 3차나 5차 비선형성은 인접 통신 채널에 직접적인 영향을 미치므로 선형화 기법을 이용하여 출력단의 혼변조 신호를 감쇄시켜야 한다. 본 논문에서는 전력 증폭기의 입력 신호를 기저대역에서 왜곡시켜 전력 증폭기를 선형화 시키는 디지털 사전 왜곡기를 구현하였다. 측정에 앞서, 모의실험을 통하여 시스템 변수에 따른 선형화기의 성능을 예측하고, 1차원 참조표(look-up table)를 사용한 사전 왜곡기의 측정 결과, 약 9 dB의 ACPR 개선 효과를 얻을 수 있었다.