• Explosives and Blasting
• /
• v.28 no.1
• /
• pp.63-70
• /
• 2010

This study is investigated the extent of the noise and ground vibration in an adjacent zone of a cattle pen and an antiquated housing structures for judgement of the spot applicability on the extents of the noise and ground vibration of the rock-splitting method by an oil pressure. It is studied by measuring and analysing in an adjacent position the extents of the noise and ground vibration according to the work process of the rock-splitting method, such as drilling, rock-splitting, arranging rock, loading and by being compared with the permitted level on the noise and ground vibration fixed at the spot. To the results, it is identified that the influence to the noise has to be considered, even if the rock-splitting method is applied as an excavation method to lower a ground vibration by the classification on blasting method of the ministry of land, transport and marine affairs.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.50-50
• /
• 2012

투습방수필름으로 많이 사용되고 있는 폴리우레탄(PU)에 광촉매 기능성을 가지고 있는 나노-$TiO_2$(Degussa P25)를 1~10wt% 복합시킨 후, 은(Ag)이온 수용액에서 자외선 조사에 의한 광증착시키는 과정을 거쳐 은이 도핑된 PU/$TiO_2$/Ag 하이브리드 멤브레인 필름을 제조하였다. (주)비에스지에서 제공받은 PU/DMF/MEK 용액에 $TiO_2$를 초음파로 균일하게 분산배합한 후, 필름캐스팅하여 만든 필름을 AgNO3 수용액에 침지시키고 254nm의 자외선을 30~120초 동안 조사하는 광증착법으로 은을 환원시켜 도핑시켰다. 은 도핑된 하이브리드 필름을 Shaking flask method에서 폐렴간균, 황색포도상구균에 대한 항균성을 측정하고, Clear zone method에서 대장균에 대한 항균성을 측정한 결과, $TiO_2$ 함량이 3wt% 이상이고 UV조사시간이 60초 이상인 경우 99.9% 이상의 항균성을 나타내는 것을 확인하였다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.05a
• /
• pp.56-56
• /
• 2002

제지산업의 발전에 따라 치환도가 다른 여러 가지 용도의 양성 전분이 개발되어 적 용되고 있다. 특히 보류제로서 양성전분을 사용할 경우 보류 향상과 더불어 강도개선 효과를 동시에 얻을 수 있는 이점을 지니고 었다. 하지만 용수 조건의 악화, 미세분 함 량의 증가 등과 같은 점차 열악해지는 초지공정에 적용하기 위해서는 보다 높은 치환 도의 전분이 요구 되고 있다. 이에 본 연구에서는 고치환 양성 전분이 초지계 내에 첨가되었올 경우 나타나는 홉 착 특성을 파악하고, 보류 및 탈수 성능을 평가함으로서 올바른 적용 방법을 제시하고 적용 효율의 극대화를 모색하고자 하였다. 산-염기 세척과정을 거쳐 제조한 활엽수 BKP를 이용해 지료를 조성하고, DDA

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1093-1100
• /
• 2006

본 연구는 D-정책을 갖는 BMAP/G/1 대기행렬 시스템의 일량(workload) 및 대기시간(waiting time)을 분석한다. 유휴한 서버는 도착하는 고객들의 서비스 시간의 총합이 주어진 임계점 D를 넘어야만 서비스를 시작한다. 고객의 도착과정은 집단마코비안도착과정(BMAP, Batch Markovian Arrival Process)을 따른다. 본 논문에서는 이러한 시스템의 일량 및 대기시간에 대한 LST를 구하고, 이로부터 평균일량 및 평균대기시간을 유도한다. 또한 BMAP/G/1의 특별한 경우인 $M^X/G/1$인 경우와 대기시간의 비교를 행한다.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.26 no.1
• /
• pp.24-38
• /
• 2017

Prosthetics procedures in dental clinics 1) Tooth preparation 2) Temporary restoration 3) Post and core 4) Impression 5) Cementation of final prosthesis The final step in the prosthodontic procedure is the fitting of the final prosthesis to the patient's abutment with an exact fit and occlusal relationship. By the way, this final prosthesis is not made in the clinic but is made in the dental lab and comes to the clinic with some time difference. In the clinic, the only medium to deliver the patient's oral information to the dental laboratory is the impression. However, many errors occur in this process. Dentists and dental technicians should try to identify the cause and make an accurate prosthesis to reduce this error.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2011

There still is a limitation in the usage of 3D clothes model in the production line due to the lack of compatibility between 3D modeling software, and its accurate 2D pattern making software, especially for free formed dress with tight fitted zone and draped part. In this study, obstacles in the 3D direct dress design process was overcome by solving the compatibility among each step of 3D virtual design process as well as adopting 3D-2D direct pattern development program called 2C-AN. Efficacy of making 2D pattern from 3D dress design using 2C-AN program developed by the authors was examined during the course of actual dress making process. Accurate ease over the fitted dress part was examined by 3D scanning technology, and the actual appearance of the draped part was compared with the simulation image of dress model. It was confirmed that the entire 3D design process and direct 2D pattern development proposed in this study was accurate enough to use in the 3D design process.

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.607-613
• /
• 1989

The chemical equilibria of Ni(II)-tetraamine (tetraamine = 2,12-dimethyl-3,7,11,17-tetraazabicyclo-11,3,1-heptadeca-1(17),2,11,13,15-pentaene) complex ion in water, acetonitrile, acetone and nitromethane were investigated using spectrophotometric method, respectively. The equilibria between low-spin ($D_{4h}$) and high-spin ($O_h$) structures of Ni-tetraamine complex ion were presented in water, acetonitrile and acetone, but not in nitromethane. The eqilibrium constants, the reaction enthalpies and the reaction entropies were determined from analysis of the temperature dependence of the electronic spectra. The formation of the triplet species ($O_h$) was found to be exothermic. The solvent and electrolyte effects on the equilibrium constants could be explained by the dielectric constants of solvents and the reaction entropies.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.509-514
• /
• 2010

낙동강 상류에 있는 하회마을은 영남지방 600년 전통의 농경마을로서 귀중한 전통문화유산이다. 이 마을의 역사적, 문화적, 경관적 가치 중 하나는 마을 앞을 흐르는 낙동강과 강 양안에 형성된 백사장 사주이다. 그러나 1970년대 중반과 1990년대 초 상류에 두 댐의 건설로 하류 유황과 유사 이송 양상이 변화하여 과거 수백 년 동안 '완벽한' 백사장을 유지해온 두 사주에 식생이 점차 이입, 활착하여 하회마을의 역사적, 문화적 경관 가치에 부정적 영향을 주기 시작하였다. 낙동강 본류에 안동댐이 준공된 1976년 이후에는 댐 건설 전과 비교하여 큰 변화는 없었으나 반변천에 임하댐이 준공된 1992년 이후 점차적으로 두 사주에 식생이 이입, 활착하기 시작하여 현재 상당한 범위까지 식생이 번무하였다. 이 같은 사주 상 식생 이입과 활착의 원인과 과정을 기초적으로 조사, 분석하기 위해 우선 과거 자료가 있는 항공사진과 지상 사진을 수집하여 연도별 식생 활착 상황을 조사하였다. 다음 하회마을 상하류 약 11.5 km 구간을 대상으로 과거 홍수자료를 가지고 두댐 건설 전후 기간으로 나누어 2차원 흐름 모의를 하여 무차원 하상소류력 분포를 분석하였다. 분석 결과는 기존 항공, 지상 사진과 비교 검토하였다. 그 결과 임하댐 건설 이후 두 사주의 홍수시 무차원 하상소류력이 하상입자가 움직이기 시작하는 0.06 이하가 되는 부분이 확대되어 식생 이입, 활착에 유리한 조건을 형성하게 된 것으로 나타났다.

• Journal of Fashion Business
• /
• v.26 no.1
• /
• pp.68-91
• /
• 2022

The purpose of this study is to create modern patterns based on considering the types and design elements of Joseon hwapo patterns containing Korean identity, and to develop costume designs by applying design elements of traditional Korean dress, Hanbok. These designs combine traditional costumes with modern sensibility using the attribute listing method, and present them using a 3D virtual clothing program. Through this, it is meaningful as it organizes data on Joseon hwapo patterns, which were rarely dealt with in the traditional Korean costume research, and it is also of research value as it is a work that utilizes Joseon hwapo patterns as a new source of fashion design development. As a research method, literature research was conducted based on the documents, 'Nabeshima-sarasa hidensho', 'Nabeshima-sarasa mihoncho', and 'Zoho kafu benran', which are related to Joseon hwapo remaining in Japan. Based on the literature research, research was performed by creating pattern design and costume design using the attribute listing method, and 3D virtual clothing. Traditional Korean costumes used in design development in this study were saekdong-jeogori, dolddi-jeogori, magoja, hongjangsam, durumagi, jungdan, gollyongpo, jeogui, breast band, mujigi-chima, chima, and baji. Further, accessories used in each costume, such as pyeseul, daedae, hapi, and jeonhaeng-utchima, and features of configurations, such as yongbo, chest ribbons, band hem, gusset, collar and dongjung, heorimalgi, neckline, and sapok line, were used for design development.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.693-699
• /
• 2013

A simple, sensitive, and specific method for quantifying the nicotine content of synthetic favoring substances (SFS) was developed using high performance liquid chromatography (HPLC) with a photo-diode array detector (PDA). Nicotine was extracted from SFS samples by using an acid-base liquid-liquid extraction method with dichloromethane and distilled water. The nicotine content was quantified by HPLC/PDA (261.9 nm) with a $C_{18}$ column under a gradient of 10% acetonitrile with 20 mM ammonium formate (ammonia solution adjusted to pH 8.7) to 100% acetonitrile. The calibration curve, analyzed from concentration standards between 0.1 to 2 mg/L, presented linearity with a correlation coefficient ($r^2$)>0.9999. The limit of quantitation (LOQ) of nicotine in SFS was 0.4 mg/kg, and the average recoveries ranged from 76.4% to 96.3%. The repeatability of measurements, expressed as the coefficient of variation (CV%), ranged from 1.74 to 5.12%. This newly developed method for nicotine quantification in SFS can be considered an analytical method with an acceptable level of sensitivity and repeatability.