• Title/Summary/Keyword: 착색제

Search Result 181, Processing Time 0.03 seconds

감귤과피 유색미의 취반 특성

  • 서성수;노홍균;윤광섭;김순동
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.10a
    • /
    • pp.157-157
    • /
    • 2003
  • 우리나라에서 생산되는 감귤은 지리적 기후 조건으로 내한성이 강한 만다린계 온주밀감이 주종을 이루나 최근 과잉생산으로 인한 가격하락과 수입자유화에 따른 대처의 일환으로 경쟁력이 높은 품종을 장려 보급하고 있다. 감귤의 국내 연간 생산량은 56만 톤으로 과일 전체 생산량의 약 30%를 차지하며 과실의 약 20%가 과피로서 그 일부가 한약재로 쓰이나 대부분이 버려지고 있다. 감귤의 과피에는 carotenoids, bioflavonoids, pectin 및 terpenes가 풍부하게 함유되어 있으며, 천연에서 발견되고 있는 약 300여종의 carotenoids계 색소 중 115종이 감귤에 존재한다. 감귤 과피의 주요 carotenoids로는 비타민 A의 역할을 하는 $\beta$-carotene과 cryptoxanthin을 비롯한 $\beta$-citraurin이며 천연 착색제로 활용되고 있다. 또, 주요 bioflavonoids로는 모세혈관의 수축을 촉진시켜 고혈압 예방과 이로 인한 각종 질환을 방지하는 작용을 가진 hesperidin과 혈액내 LDL 콜레스테롤의 양을 줄이는 작용이 알려진 naringin이 있다. 그 외의 감귤 flavonoids도 항산화작용, antimutagen 활성, 항암, 항알레르기 및 항바이러스 효과가 알려져 있다. 밀감 과피의 bioflavonoids는 약 60여종이 분리되어 그 구조가 밝혀져 있으나 90% 이상이 hesperidin이다. 또 과피유에는 $\delta$-limonene을 주성분으로 하는 휘발성 향미성분이 함유되어 있어 향미 개선제로서의 활용이 기대되고 있다. 본 연구는 최근 식생활의 서구화로 쌀 위주의 식생활에 많은 변화를 가져와 쌀 소비량은 해마다 줄어들고 있는 반면 기능성을 가미한 쌀의 소비가 늘고 있음을 감안하여, 우리나라 제주도에서 생산되고 있는 감귤 과피의 물 균질액을 쌀에 코팅하여 아름다운 색상과 기능성을 지닌 유색미를 제조함과 동시에 그 취반 특성을 조사하였다. 그 결과 유색미의 색상은 진노랑(L*; 63.6, a*; -7.87, b*; 46.35)으로 취반 후에도 유사한 색상을 나타내었다. Total carotenoids는 감귤과피에서는 10.74mg%, 과피의 물 균질액에는 0.46mg%이었으며 유색미에는 0.l2mg%, 유색미 취반에는 0.05mg%를 나타내었다. Hesperidin은 과피, 물 균질액, 유색미 및 유색미 취반에서 각각 2173.l2mg%, 108.65mg%, 21.73mg% 및 8.67mg%이었으며, naringin은 각각 1468.40mg%, 73.38mg%, 14.62mg% 및 5.87mg%를 나타내었다. 감귤과피의 유리아미노산은 asparagine이 94.22mg%로 가장 높았으며, methionine이 24.88mg%, alanine이 19.64mg%, ${\gamma}$ -aminoisobutylic acid가 15.37mg%로 이들 4종의 아미노산이 전체 유리아미노산함량의 70%를 나타내었다. 유색미 취반에는 백미 취반에 비하여 총 유리아미노산의 함량이 15%정도 증가되었으며, 그 중에서 glutamic acid는 2.5 배가 증가되었다. 감귤과피의 주요 무기질은 K(652.60mg%)와 Ca(222.50mg%)로 전체 무기질 함량의 86%를 차지하였으며 유색미 취반은 백미 취반에 비하여 K는 2.3배, Mn는 76%, Ca, P, Mg은 16~26%, Fe는 13%가 각각 증가되었다. 취반의 경도, 점착성 및 깨짐성은 유색미 취반과 백미 취반간에 차이가 없으나 응집성과 탄력성은 유색미 취반에서 높았다. 색상에 대한 기호도, 구수한 맛 및 종합적인 기호도는 유색미 취반에서 높았으며 단맛, 쓴맛은 백미 취반과 차이를 보이지 않았다.

  • PDF

Optimum Treatment Parameters for Photodynamic Antimicrobial Chemotherapy on Streptococcus mutans Biofilms (Streptococcus mutans biofilm에 대한 광역동 치료의 최적조건에 관한 연구)

  • Choi, Seojung;Park, Howon;Lee, Juhyun;Seo, Hyunwoo;Lee, Siyoung
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.42 no.2
    • /
    • pp.151-157
    • /
    • 2015
  • The purpose of this study was to evaluate the effects of Photochemotherapy using a combination of erythrosine and standard halogen dental curing lights on the viability of Streptococcus mutans in the biofilm phase. To investigate the optimum treatment parameters, the researchers controlled the concentration of erythrosine, light irradiation time and the treatment time of erythrosine. The higher concentration of erythrosine (0, 10, 20, 40, 80 M) in the presence of light irradiation created greater effects in reducing the viability of S. mutans. The results showed a statistically significant difference among the antimicrobial effects in 20, 40, 80 M erythrosine. The higher irradiation time of light (0, 5, 15, 30, 60, 75s) in the presence of erythrosine showed greater effects in reducing the viability of S. mutans. There was statistically significant difference in 30, 60, 75 seconds. The higher treatment time of erythrosine (0, 1, 2.5, 5min) in the presence of erythrosine created greater effects on reduction of S. mutans viability. Statistically significant differences were found between 2.5 and 5 minutes of erythrosine treatment time. The results of this study showed that the photochemotherapy on S. mutans using erythrosine and the halogen dental curing lights conventionally used in dental clinics is effective in the condition of 20-40 M erythrosine concentration, irradiation time over 30 seconds, and erythrosine treatment time over 2.5 minutes.

New Yellow Quinoline Derivatives Including Dione Moiety for Image Sensor Color Filters (이미지 센서 컬러 필터용 다이온 성분을 포함하는 신규 황색 퀴놀린 유도체)

  • Sunwoo, Park;Seyoung, Oh;Yuna, Kang;Hyukmin, Kwon;Sunwoo, Dae;Changyu, Lee;Dae Won, Kim;Min-Sik, Jang;Jongwook, Park
    • Applied Chemistry for Engineering
    • /
    • v.34 no.1
    • /
    • pp.80-85
    • /
    • 2023
  • New yellow quinoline-dione dye derivatives were designed and synthesized for use in image sensor color filters. The synthesized compounds have a basic chemical structure composed of quinoline and dione groups. New materials were evaluated on the basis of their optical and thermal properties under conditions mimicking those of a commercial device fabrication process. A comparison of their related performances revealed that, between the two prepared compounds, 2-(3-hydroxyquinolin-2(1H)-ylidene)-1H-indene-1,3(2H)-dione (HQIDO) exhibited the superior performance as an image sensor color filter material, including a solubility greater than 0.5 wt% in propylene glycol monomethyl ether acetate solvent and a high decomposition temperature of 298 ℃, respectively. The results suggest that HQIDO can be used as a yellow dye additive in an image sensor colorant.

Studies on the Utilization of Sweet Potatoes for Takju Brewing (탁주양조원료(濁酒釀造原料)로서 고구마의 이용(利用)에 관(關)한 연구(硏究))

  • Kim, Chan-Jo;Choi, Woo-Young;Oh, Man-Jin
    • Applied Biological Chemistry
    • /
    • v.15 no.3
    • /
    • pp.213-219
    • /
    • 1972
  • In order to utilize sweet potatoes for the material of Takju, brewing experiments with raw sweet potatoes, sweet potato chips powder and its koji were conducted; and various tests were carried out on effect of the treatments of acid, alkali, polyphenol oxidase inhibitor, oxidizing and reducing agents upon the prevention against coloring of sweet potato chips by steaming, and on peeling effect of sweet potatoes by the alkali and heat treatments. The results obtained were as follows. 1) In the case of brewing with raw sweet potatose, each plot showed low acid and ethanol content, and its finished Takju had an undersirable color and odor. The plots which were mashed after peeling showed higher ethanol contents than the plots mashed without peeling. 2) In the case of brewing with sweet potato chips powder, each plot contained considerably more amount of ethanol than the plots brewed with raw sweet potatoes, white it contained less amount of acid. The ethanol contents of the plots using wheat bran koji were $10.5{\sim}11.4$ per cent 4 days after mashing, and were higher than those of the plots using malts powder. Their finished Takju was inferior in quality because of the lack of acid and being darkened gradually in process of time. 3) The kojies which were made of sweet potato chips powder with Neurospora sitophila or Aspergillus oryzae had good appearance, but the Takju mashes brewed with these contained remarkably less amount of ethanol. 4) Effect of the treatments of acid, alkali, polyphenol oxidase inhibitor and organic solvents such as ether and ethanol upon the prevention against coloring of sweet potato chips was not recognized. Alum and burnt alum were effective a little on the decolorization, and among the oxidizing and reducing agents tested, potassium permanganate was most effective. 5) Darkening of sweet potato chips powder in course of heating after mixing with water was not affected by pectin and amino acids, but by tannin. 6) Sweet potatoes were not peeled easily by friction after soaking in the boiling solution of 3 per cent alkali for 6 minutes and peeled in boiling water for 12 minutes. From the viewpoint of the results above mentioned, it seems to be necessary to study further on the isolation of microorganisms which are able to decompose the coloring substances and yeasts which are adequate for the fermentation of sweet potatoes in order to utilize sweet potatoes for Takju brewing, because brewing with raw sweet potatoes, sweet potato chips powder and its koji was unsuccessful, and effect of the various treatments on the decolorization of sweet potatoes was not recognized.

  • PDF

Preparation of Electronic Paper using $TiO_2$ Nanoparticles ($TiO_2$ 나노입자를 이용한 전자종이 제조)

  • Lee, Nam-Hee;Kim, Joong-Hee;Hong, Wan-Sik;Jang, Moon-Ik;Ahn, Jin-Ho;Hwang, Jong-Sun;Kim, Sun-Jae
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.11a
    • /
    • pp.97-102
    • /
    • 2004
  • 용액 중에서 나노입자의 전기영동 특성을 이용한 전자종이용 잉크 제조를 위해 $TiO_2$ 나노입자를 저유전율 용매인 cyclohexane에 혼합한 후 용매와 용질의 비중차를 줄이기 위해 분말 상 polyethylen을 첨가하여 high energy milling의 방법으로 입자분쇄와 동시에 입자 표면에 고분자 풍을 코팅하였다. 용액내의 입자 분산성 향상과 용매 착색을 위하여 계면활성제와 oil-blue N을 첨가한 후 전자종이용 잉크를 제조하여 측정한 제타 전위 결과 cyclohexane 내에서 $TiO_2$의 제타전위는 -40mV 정도였으나 polyethylene으로 코팅한 후 계면활성제를 첨가하였을 경우 최대 -110mV 이상의 높은 값을 나타내었다. 실제 디스플레이 특성을 평가하기 위해 포토리소그래피를 이용하여 3인치 크기의 ITO glass 위에 $10{\mu}m$의 크기를 갖는 십자형의 격벽을 $40{\mu}m$의 높이로 균일하게 형성한 후 합성된 전자잉크로 주입하여 상부전극과 하부전극사이에 UV 경화제를 도포하여 UV 접합을 실시하였다. 격벽 내에서 입자의 mobility를 측정하여 환산된 전자잉크의 응답속도는 0.1cm/sec로 측정되었으나, 전기영동시 입자들의 움직임에 따른 반사광의 파형을 측정한 경우 0.07cm/sec의 응답속도를 나타내었다.

  • PDF

SHEAR BOND STRENGTH OF COMPOSITE RESIN TO ENAMEL FOLLOWING ENAMEL MICROABRASION (Enamel Microabrasion을 시행한 법랑질과 복합레진의 전단결합강도)

  • Hong, Kee-Sang;Lee, Sang-Dae;Lee, Sang-Hoon
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.27 no.1
    • /
    • pp.45-53
    • /
    • 2000
  • Enamel microabrasion is a means by which superficial enamel discoloration is removed using hydrochloric acid and fine pumice. As enamel microabrasion alone may not be sufficient in cases of deeper discoloration, composite resin restoration is recommended in areas where there is remaining discoloration. The purpose of this study was to investigate the effects of different methods and number of applications of enamel microabrasion on the shear bond strength of composite resin to enamel. Untreated control was designated as group 1. 5-second applications of a mixture of 18% HCl and fine pumice were performed 5 and 10 times on groups 2 and 3, respectively. A commercially available mixture of 10% HCl and abrasives(PREMA) was applied using a 10 : 1 gear reduction handpiece 5 and 10 times on groups 4 and 5, respectively, with each application lasting 20 seconds. After etching with 37% phosphoric acid, composite resin was bonded. Thermocycling was performed and shear bond strength was measured. The following results were obtained : 1. Group 2 showed the highest bond strength$(24.36{\pm}3.34)$, while group 3 showed the lowest$(19.35{\pm}3.43)$, Shear bond strength decreased in the following order: 2>4>5>1>3. 2. Group 2 showed bond strength significantly higher compared to groups 1 and 3(p<0.05). 3. There were no significant differences between groups 2 and 3, which had been microabraded using HCl and pumice, and groups 4 and 5, to which PREMA had been applied, when bond strengths were compared(p>0.05). 4. When modes of fracture were examined, adhesive failure was observed in groups 3 and 4, while cohesive failure was observed in groups 1, 2, 3 and 4. Only mixed failures were found group 5. 5. When viewed using a SEM, groups 2 and 3, which had been microabraded using HCl and pumice, showed surface appearances similar to that of enamel etched with phosphoric acid. Groups 4 and 5, treated with PREMA, exhibited a smooth surface similar to that of group 1. All oops showed similar, typical surface characteristics following phosphoric acid etching.

  • PDF

Comparison of apical sealing ability of continuous wave of obturation technique using EndoTwinn and System B (EndoTwinn과 System B continuous wave of obturation units를 이용한 근단부 근관충전 효율비교)

  • Shin, Hyun-Ju;Park, Jeong-Kil;Hur, Bock;Kim, Hyeon-Cheol
    • Restorative Dentistry and Endodontics
    • /
    • v.32 no.6
    • /
    • pp.522-529
    • /
    • 2007
  • The purpose of this study was to compare the apical leakage of the root canal filled with the System B and the EndoTwinn(the combined application of heat and ultrasonic vibration). Sixty extracted premolars with straight root were cleaned and shaped to size 35. Group SB was obturated using System B and Group ET was filled with EndoTwinn. A size 35 of 0.06 tapered gutta-percha and Adseal were used and the plugger which could be introduced to 4 mm short of working length was selected in the obturation procedure. As the positive control, Group PC was not filled. In Group SB, ET and PC, all external surfaces of each tooth were coated with nail varnish leaving only 1 mm area around the apical foramen. In the negative control of Group NSB and Group NET, all of external tooth surface including apical foramen was coated with the nail varnish. The specimens were immersed in methylene blue dye solution for 2 days. Then the specimens were sectioned at each 1 mm from apex to 5 mm level. The final score of one specimen was given by summing up of the points at all levels. The dye leakage of Group ET was significantly less than that observed in Group SB (p < 0.05). And the frequency of gutta-percha pulling out from root canal when the plugger was removed was more often with the System B than with EndoTwinn but there was no significant difference.

Simultaneous Analytical Techniques for Determination of 8 Synthetic Food Colors in Foods by HPLC (HPLC를 이용한 식품중 식용타르색소 8종의 동시분석)

  • Park, Sung-Kwan;Lee, Chang-Hee;Park, Jae-Seok;Yoon, Hae-Jung;Kim, So-Hee;Hong, Yeun;Lee, Jong-Ok;Lee, Chul-Won
    • Analytical Science and Technology
    • /
    • v.13 no.3
    • /
    • pp.378-384
    • /
    • 2000
  • This Study has been carried out to develop a method of analysis of 8 permitted synthetic food colors [including Brilliant Blue FCF(B1), Indigocarmine (B2), Fast green FCF(G3), Amaranth (R2), Erythrosine (R3), Allura red (R40), Tartrazine (Y4), Sunset Yellow FCF (Y5)] in Korean foods by HPLC. After adjusting to 0.5% HCl, each of the food colors extracted was eluted by Sep-pak $C_{18}$ cartridge. Eluates were then determined by high performance liquid chromatograph with a UV-VIS detector. Recoveries of the 8 synthetic food colors were found to be 81.2-98.0% for soft drinks, 80.6-96.1% for candy, 79.8-96.3% for chewing gum, 76.5-91.7% for cereals, 79.9-93.8% for ice cream and 78.6-94.7% for jelly, respectively. The detection limits were $0.05-0.1{\mu}g/g$.

  • PDF

Recovery of Poly(3-hydroxybutyrate) from the Coagulated Cells of Alcaligenes eutrophus. (응집 처리한 Alcaligenes eutrophus 균체로부터 poly(3-hydroxybutyrate)의 회수)

  • 조경숙;홍은화;류희욱;장용근
    • Microbiology and Biotechnology Letters
    • /
    • v.26 no.3
    • /
    • pp.206-212
    • /
    • 1998
  • The effects of the pretreatment with coagulants on the recovery efficiency of poly (3-hydroxybutyrate, PHB) synthesized in Alcaligenes eutrophus were investigated. Al-base or Fe-base coagulants, and the dispersion method of 30% hypochlorite solution and chloroform were used as coagulants and PHB recovery method, respectively The recovery efficiency of PHB from the cells harvested with Al-base coagulants at the range from 0 to 1000 mg-Al/L was similar to that from cells harvested without the coagulants. At these conditions, the concentrations of residual aluminium in the purified PHB were below 250 mg-Al/kg-PHB, indicating the effect of residual aluminum on the characteristics of the purified PHB can be insignificant. When the dosage of coagulants was over 1000 mg-Al/L, the PHB recovery remarkably decreased with increasing the coagulant dosage. However, the PHB recovery could be enhanced by the use of 50% hypochlorite solution instead of 30% hypochlorite solution. Even though the reduction of PHB recovery efficiency was not found by using Fe-base coagulants, the purified PHB was stained pale red due to residual iron, These results suggest that the use of Al-base coagulants did not exert bad influence on neither PHB recovery efficiency and PHB purity.

  • PDF

Influence of Dichlorprop and MCPB on the Reduced Effect of Fruit Drop and Fruit Quality before and after Storage in Apples (생장조정제(生長調整劑) Dichlorprop 및 MCPB 처리(處理)가 사과의 후기낙과(後期落果) 경감효과(輕減效果) 및 저장후기(貯藏後期) 과실(果實)의 품질(品質)에 미치는 영향(影響))

  • Lee, H.S.;Kang, C.K.;Ryu, G.H.;Park, Y.S.;Jung, J.H.
    • Korean Journal of Weed Science
    • /
    • v.11 no.2
    • /
    • pp.128-136
    • /
    • 1991
  • This experiment was conducted to evaluate the effect of plant growth regulators, dichlorprop and MCPB on the reduced effect of fruit drop and fruit quality before and after storage in apples. Dichlorprop was tested with dilution of 1000 at 30, 40, 50 days before harvesting, and MCPB with dilution of 4000 at 15, 25, 35 days before harvesting. The results are summarized as follows : Percentage of fruit drop was appeared to the notable reduction as compared with the untreated control when regulators was applied with dilution of 1000 at 30 days before harvesting by dichlorprop and with dilution of 4000 at 35 days before harvesting by MCPB. Degree of fruit colour showed to the remarkable promotion at all the treatment of 30, 40, 50 days before harvesting by dichlorprop as compared with the untreated control. Sugar contents in flesh was increased a little at the treatment of 30 days before harvesting by dichlorprop, but acid contents in flesh was reduced at all the treatment of 30, 40, 50 days before harvesting by dichloroprop and at 15, 25, 35 days before harvesting by MCPB. Passed firmness of fruit after storage was maintained at the treatment with dilution of 4000 at 35 days before harvesting. Therefore, it was repressed a softening of fruit, but by dichlorprop treatment at 30, 40, 50 days before harvesting, fruit firmmess was appeared to reduce according to the passage of storage period. Amount of ethylene evolution after storage was showed to reduce at all the treatment by early treated time of dichoroprop and MCPB, but carbon dioxide increased at treatment conditions such as the front. Accordingly, these relationship showed to be contrary each other.

  • PDF