• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.263-268
• /
• 1996

CANDU 6 형 원자로의 반응도제어기구 설치대에 있는 수많은 반응도제어기구들은 원자로심에서 발생한 방사선의 흐름통로를 제공하므로 설치대에서의 방사선 피폭이 예상된다. 이런 반응도제어기구 설치대에서의 방사선량을 예측하기 위하여 1 차원 각분할 전산코드인 ANISN 과 2 차원 각분할 전산코드인 DOT를 사용하여 방사선 차폐해석을 수행하였다. 반응도제어기구 도관을 통과하는 방사선의 흐름에 기인한 월성 2호기 반응도제어기구 설치대 상단에서의 최대 선량율은 31$\mu$Sv/hr 로 설계 목표치 250$\mu$Sv/hr 보다 낮게 평가되었다.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.94-102
• /
• 2016

When establishing shielding facilities for EMP protection, WBC effect is used to protect fire pipes and honeycomb cells are inserted into the fire pipes to improve the shielding effectiveness. At this point, the smaller unit cell of honeycombs becomes, the more likely it interrupts the flow of water, which ends up clogging the fire pipes with sediment. To prevent this phenomenon, I would suggest a design method due to the pilarization loss of water molecules that contributes to increasing the size of honeycomb cells and remaining thin-walled sufficient for required shielding effectiveness.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1950-1951
• /
• 2007

본 논문에서는 코일건의 설계시 자기차폐 효과에 따른 코일건 성능 향상 및 최적화에 대하여 연구하였다. 일반적인 솔레노이드 코일건과 솔레노이드 코일에 자기차폐시킨 코일건의 자기장 분포를 유한요소해석을 통해 비교함으로써 자기차폐를 한 코일건의 자속밀도와 투사체가 받는 힘이 향상됨을 알 수 있었다. 또한 자기차폐시킨 코일건을 동일 코일량에 대한 성능 최대화를 위해 솔레노이드 형상을 최적화하고, 그 모델을 실제 제작하여 성능을 검증하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.101-107
• /
• 2002

High performance packages must protect circuits from the internal leakaged-electromagnetic fields as well as the surrounding. In this paper, we characterized an electromagnetically-shielded millimeter-wave ceramic package from 20 to 40 ㎓ using FEM(Finite Element Method). From these calculation results, the parasitic resonance is observed at 33.4 ㎓. We use metal-filled via-holes at the ceramic package walls and resonance has been suppressed in a frequency range from 20 to 40 ㎓. These calculation results will be helpful for MMIC packaging using electromagnetically-shielded millimeter-wave ceramic packages.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.4
• /
• pp.228-236
• /
• 1995

In this paper the method to evaluate shielding deficiency by gamma scanning test was presented and verified theoretically by Monte Carlo code which is one of the best effective method for radiation shielding calculation. The cylindrical shielding model was selected to evaluate shielding deficiency by gamma scanning test. First, the reference shielding according to the design requirement of cask was fabricated specially and reference values were measured with Co-60 source and scintillation detector. As a result with which calculated the reference values, it is shown that maximum deficiency thickness for lead of true cylindrical shielding model was 12mm. To verify this, thickness of lead was calculated by MCNP code and maximum deficiency thickness was 11.6mm. The experimental result obtained by the use of reference shielding was in good agreement with the theoretical result within 4.1%. So, this method can be applied to inspect the shielding ability for great shielding or cask which the radioactive material is used. To perform measurement more exactly, the further work on the development of measuring equipment to display the results on the screen will be required.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.05a
• /
• pp.131-132
• /
• 2007

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.419.2-419
• /
• 2001

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.364-364
• /
• 2002

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2012.10a
• /
• pp.163-164
• /
• 2012

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.384-391
• /
• 2012

In this paper, reinforced concrete structures are modeled and analyzed. Reinforced concrete has been an essential element in the construction and one that is provided for shielding effectiveness at particular frequencies by rebar placed as a set up in the form of a grid. Using commercial 3-dimensional electromagnetic(3D EM) tool to analyze the reinforced concrete structure, the procedure of analysis for reinforced concrete is computed by dividing concrete, rebar and entire reinforced concrete. The spacing of rebar is bigger, transmission coefficient is higher and the diameter of rebar is bigger, transmission coefficient is lower. Also, in case of two layers is analyzed by gap of layers. Using single layer rebar that thickness of rebar given by 10, 20 and 30 mm have transmission coefficient of -1.89, -2.73 and -4.76 dB/10 cm at 500 MHz. Also, two layers rebar obtain -1.89, -2.73 and -4.76 dB/10 cm for same conditions.