• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.449-452
• /
• 2018

본 논문에서는 데이터 시각화 목적에 따른 시각화 표현 방식과 6개의 데이터 시각화 툴들의 비교 분석을 통하여 목적에 맞는 차트 유형의 선택의 중요성과 각 툴들이 제공하는 기능과 차이점을 분석해 보았다. 부분적이지만 선정된 각 툴들의 비교를 통해 데스크톱 기반인 환경에서는 비교적 많은 시각화 유형(차트)의 제공이 가능하지만 모바일 환경에서의 제약사항들을 알 수 있었다. 또한 시각화 툴들이 점차 웹 기반 서비스로 진화하고 있으며 클라우드를 제공하여 전과물들을 쉽게 저장 공유하고 텀플로우 기능이 점점 더 요구될 것으로 보인다. 이에 향후 필요로 하는 다양한 초점의 데이터 시각화 연구를 고찰해 보았다.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.11-19
• /
• 1997

The new definition of calibration coefficients is proposed for a five-hole Pitot tube. Two-angle chart calibration other than one-angle variation is considered to improve the accuracy in the measurement of the three-dimensional velocity fields. Several sets of correlation coefficients are introduced for different shapes of the probe tip. The calibration method with one-angle variation is compared with the new two-angle chart calibration method and the improvement of the present method is clearly shown.

• Journal of radiological science and technology
• /
• v.44 no.4
• /
• pp.375-380
• /
• 2021

This study aim was quantitative assessment of MTFs of spectrum of the square wave chart images and Coltman chart images for 0°, 1.7°, 2.2°, 2.9°, 4.1° by using chart method. In general device was AccuRay-650 (DK Medical System, Korea) used, indirect flat panel detector(FPD) Aero (Konica, Japan) used and MATLAB R2019a (MathWorks, USA) used. The result of comparison for each angle of MTF the edge image was highest quantitatively value for MTF finding of showed the best value of 0.1 based on the frequency of 3.5 mm^-1, value of 0.1 based on the square wave was frequency of 3.0 mm^-1 and value of 0.1 based on the Coltman transform was frequency of 2.4 mm^-1. In this study it was significant that the methodology of the international Electro-technical Commission was applied mutandis by using the Fujita method within 2~3°.

• Journal of KIISE:Software and Applications
• /
• v.30 no.3_4
• /
• pp.293-307
• /
• 2003

Object-oriented development has been generalized, but object-oriented project planning and scheduling techniques have not been studied enough. Furthermore, it is difficult to apply the conventional software management techniques to object-oriented projects. Especially, the large scaled projects are increasing, but the project planing techniques for these large scaled projects have not been proposed enough. In this paper, we propose systematic techniques for OO based project scheduling. We suggest a 7 step-process for deriving the OO project schedule from the use-case diagram which is describing the functional requirements of the system. The proposed process includes identifying use-cases, drawing preliminary chart through interdependency analysis, identifying characteristics of each use case, determining the number of iteration, assigning use-cases to iteration, considering available resource and constraints, drawing revised PERT chart. Each step has the explanation of the input, output, and the guidelines needed to perform the step. The project scheduling technique proposed in this paper ran be used effectively in the planning phase which the purpose is to plan a development schedule to yield the high quality software in minimum time.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2004.05a
• /
• pp.341-346
• /
• 2004

In the present work, for various energy and electricity generating systems to be compared in view of integrated social impacts, nuclear, coal-fired, heavy oil-fired, and LNG, and hydroelectricity systems are considered as electricity generating options. The following assessment factors are selected: economic effect, health effect, environmental effect, and benefit at the national level. As a preliminary study, these factors are represented as power generation cost, estimated mortality, Carbon Dioxide gas emission, and fuel supply stability, respectively. For integrated representation of a multi-criteria decision-making (MCDM) problem, radar charts are introduced to facilitate a comparative recognition of estimates. In the near future, based on the estimates, a MCDM methodology for both qualitative and quantitative comparison will be developed.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.818-821
• /
• 2004

교육전산망이 상용망 서비스 업체들에 위탁 운영되면서 각 대학은 자신의 교내 전산망을 다양한 방법으로 외부와 연결하여 사용하고 있다. 이런 환경하에서 대학들이 전산망 운영정책을 효과적으로 결정하는데 도움을 줄 수 있는 지원 체계가 거의 없다. 본 논문은 대학의 외부망 다원화에 따른 전산망 운영정책을 지원하는 종합 정보시스템 NMIS_U(Network Menagement Information System_University)를 소개한다. NMIS_U는 각 대학의 전산망에 적합한 운영정책 정보를 동적 차트를 통해 실시간으로 제공한다.

• Journal of Platform Technology
• /
• v.12 no.3
• /
• pp.16-26
• /
• 2024

Videos shot underwater are known to have significant color distortion. Typical causes are backscattering by floating objects and attenuation of red colors in proportion to the depth of the water. In this paper, we aim to analyze color correction performance and color distortion patterns for images taken underwater. Backscattering and attenuation caused by suspended matter will be discussed in the next study. In this study, based on the DeepSeeColor model proposed by Jamieson et al., we verify color correction performance and analyze the pattern of color distortion according to changes in water depth. The input images were taken in the US Virgin Islands by Jamieson et al., and out of 1,190 images, 330 images including color charts were used. Color correction performance was expressed as angular error using the input image and the correction image using the DeepSeeColor model. Jamieson et al. calculated the angular error using only black and white patches among the color charts, so they were unable to provide an accurate analysis of overall color distortion. In this paper, the color correction error was calculated targeting the entire color chart patch, so an appropriate degree of color distortion can be suggested. Since the input image of the DeepSeeColor model has a depth of 1 to 8, color distortion patterns according to depth changes can be analyzed. In general, the deeper the depth, the greater the attenuation of red colors. Color distortion due to depth changes was modeled in the form of scale and offset movement to predict distortion due to depth changes. As the depth increases, the scale for color correction increases and the offset decreases. The color correction performance using the proposed method was improved by 41.5% compared to the conventional method.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.7
• /
• pp.35-45
• /
• 2016

Estimation of vertical bearing capacity is critical in the design of bucket foundation used to support offshore structure. Empirical formula and closed form solutions for bucket foundations in uniform sand or clay profiles have been extensively studied. However, the vertical bearing capacity of bucket foundations in alternating layers of sand overlying clay is not well defined. We performed a series of two-dimensional axisymmetric finite element analyses on bucket foundations in sand overlying clay soil, using elasto-plastic soil model. The load transfer mechanism is investigated for various conditions. Performing the parametric study for the friction angles, undrained shear strengths, thickness of sand layer, and aspect ratios of foundation, we present the predictive charts for determining the vertical bearing capacities of bucket foundations in sand overlying clay layer. In addition, after comparing with the finite element analysis results, it is found that linear interpolation between the design charts give acceptable values in these ranges of parameters.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.598-608
• /
• 2020

In this paper, we propose a color correction technique for images acquired through a multi-view camera system for acquiring a 3D model. It is assumed that the 3D volume is captured indoors, and the position and intensity of the light is constant over time. 8 multi-view cameras are used, and converging toward the center of the space, so even if the lighting is constant, the intensity and angle of light entering each camera may be different. Therefore, a color optimization function is applied to a color correction chart taken from all cameras, and a color conversion matrix defining a relationship between the obtained 8 images is calculated. Using this, the images of all cameras are corrected based on the standard color correction chart. This paper proposed a color correction method to minimize the color difference between cameras when acquiring an image using 8 cameras of 3D objects, and experimentally proved that the color difference between images is reduced when it is restored to a 3D image.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.97-102
• /
• 2006

정보 통신의 발달과 인터넷 기술의 발달로 그래픽 등의 매체를 통하여 시간과 장소에 구애받지 않는 학습자 수준에서 적절한 교육을 받을 수 있는 쌍방향 멀티미디어 환경의 원격 웹 기반교육(Web Based Instruction, WBI)이 등장하게 되었다. 인터넷을 활용한 교육을 함으로써 개별화된 교육을 할 수 있고, 학습자들이 인터넷을 통해 함께 탐구하고 대화하며 결론에 도달하는 협력 학습의 장을 제공할 수 있게 되었다. 그래프 알고리즘은 자료구조의 한 분야로 종류도 다양하고 개념도 복잡하여 학습자들이 쉽게 이해하지 못하는 부분이 많았다. 본 논문에서는 그래프 알고리즘을 하이퍼텍스트를 통한 단순한 자료의 제시에 그치지 않고 웹의 장점을 살려 플래시를 통해 각 그래프 알고리즘의 수행단계를 시각적으로 보임으로써 그래프 개념을 쉽게 이해하고 여러 종류의 그래프 알고리즘을 효율적으로 반복 학습할 수 있도록 하였다. 또한 C로 구현된 각 알고리즘의 소스를 볼 수 있게 하고 그 결과도 보여줌으로 그래프 알고리즘을 정확히 이해하도록 하였다. 학습 후 평가 문제를 통해 학습자의 이해도를 평가하고 평가 결과를 막대그래프 차트로 보임으로써 비교 평가가 쉽게 구현하였다.