• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.6-11
• /
• 2014

To optimize the design of fuel cylinder for LNG vehicles, we introduced the design parameters of the inner and the outer tank of the vessel support structure by analyzing the structural characteristics of conventional design. We selected the inner and outer diameter of the hollow support bars and a dimension of the inner structure of the vessel among the design parameters for design optimization. In this study the temperature distribution and thermal stress of the support structure were evaluated by using the utility program as MSC/MARC. The evaluation criteria are first mode natural frequency, total transferred energy through support structure and thermal stress. The developed design satisfied the design criteria and it was made of prototype. The prototype was verified through three-dimensional vibration testing and thermal performance test.

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.98-107
• /
• 2020

In surface mining, it is very important to create a mining area for economical mining. This study examined the contribution of design factors on slope stability with different slope design and blasting conditions. The design factors were the properties of the rock, the slope angle and the bench height, and the blasting conditions were reflected at different explosive weight and distances. The safety factor of slope was calculated by shear strength reduction method through 3D modeling, and the contribution rate of rock slope was 94.8%, which is relatively higher than other design factors, slope angle 0.89%, bench height 0.58%, and blasting It is shown that it affects about 3.73%, and it can be seen that blasting at a close distance can affect the stability of the slope.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.2
• /
• pp.249-259
• /
• 2011

In this study, the distortional behaviors of tub-section steel girders subjected to torsional loading were analyzed, and predictor equations were developed for estimating the member forces induced in the internal bracing system installed in the steel tub girders. Torsional loadings originated either by eccentric vertical loading or girder curvature were decomposed into the pure torsional force component that does not affect the distortional box deformation, and into the distortional force component that directly induces box distortion. The axial member forces induced in the internal cross frames were formulated as a function of the magnitude of torsional loading through the analytical investigation of the interactions between the distortional force component and internal cross frames. To verify the proposed equations, three-dimensional finite element analysis (3D FEA) was conducted for the straight simple-span girder and the three-span continuous girder samples. Very good agreement was found between the member forces from the FEA and the proposed equations.

• Nuclear Engineering and Technology
• /
• v.25 no.4
• /
• pp.552-560
• /
• 1993

In this study, the detailed fuel assembly stress analysis model to evaluate the structural integrity for seismic and blowdown accidents is developed. For this purpose, as the first step, the program MAIN which identifies the worst bending mode shaped fuel assembly(FA) in core model is made. And the finite element model for stress calculation of FA components is developed. In the model the fuel rods (FRs) and the guide thimbles are modelled by 3-dimensional beam elements, and the spacer grid spring is modelled by a linear and relational spring. The constraints come from the results of the program MAIN. The stress analysis of the 16$\times$16 type FA under arbitary seismic load is performed using the developed program and modelling technique as an example. The developed stress model is helpful for the stress calculation of FA components for seismic and blowdown loads to evaluate the structural integrity of FA.

• Tunnel and Underground Space
• /
• v.15 no.2 s.55
• /
• pp.145-156
• /
• 2005

MODFLOW, 3-D finite difference code, is widely used to model groundwater flow and has been used to assess the effect of excavations on the groundwater system due to construction of subways and mountain tunnels. The results of numerical analysis depend on boundary conditions, initial conditions, conceptual models and hydrogeological properties. Therefore, its accuracy can only be enhanced using more realistic and field oriented input parameters. In this study, SA(simulated annealing) was used to integrate hydraulic conductivities from a few of injection tests with geophysical reference images. The realizations of hydraulic conductivity random field are obtained and then groundwater flows in each geostatistically equivalent media are analyzed with a numerical simulation. This approach can give probabilistic results of groundwater flow modeling considering the uncertainty of hydrogeological medium. In other words, this approach makes it possible to quantify the propagation of uncertainty of hydraulic conductivities into groundwater flow.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2003.03a
• /
• pp.113-120
• /
• 2003

The estimation of the coeff. of permeability is a major process that influenced in very large portion to the changing of gound water movement and estimation of the outflow’s quantity in the ground water movement modelling. To overcome the error caused by difficulty of the ground investigation for the hydraulic parameter’s estimation, in this paper, we study of correlation between electric resistivity and coeff. of permeability, and analyse of coeff. of permeability from electric resistivity. To accomplish this purpose, we carry out electrical logging, AMT survey as an in-situ test, and measure electric resistivity, porosity, permeability for the intact rock as a laboratory test. Based on the results of this research, it can be applied that estimation of the coeff. of permeability using electrical logging and AMT survey is a effective method for the impossible area of the ground investigation caused by geographical condition and petition.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.166-180
• /
• 2016

The present study numerically simulated the CO2 injection into the saline aquifer of CO2CRC Otway pilot project and the resulting hydrological-mechanical coupled process in the storage site by TOUGH-FLAC simulator. A three-dimensional numerical model was generated using the stochastic geological model which was established based on well log and core data. It was estimated that the CO2 injection of 30,000t over a period of 200 days increased the pressure near the injection point by 0.5 MPa at the most. The pressure increased rapidly and tended to approach a certain value at an early stage of the injection. The hydrological and mechanical behavior observed from the CO2 flow, effective stress change and stress-strength ratio revealed that the CO2 injection into the saline aquifer under the given condition would not have significant effects on the mechanical safety of the storage site and the hydrological state around the adjacent fault.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.540-540
• /
• 2012

강우 발생시 유역에 집수된 물이 하천에 이르는 경로에 따른 유출은 지표유출, 지표하유출, 지하수유출로 구분된다. 정확한 수문순환 과정의 해석을 위해서는 지표 흐름뿐만 아니라 지표하 및 지하수 흐름의 해석이 중요한 실정이나 일반적으로 실무에서 사용되는 강우-유출해석 모형은 지표유출을 해석하기 위한 모형이 대부분이며, 지표하 유출과 침투량을 산정하는데 어려움이 있다. 일반적인 강우-유출해석 모형은 Horton 방법, NRCS 방법, Green-Ampt 방법에 의해 유효우량을 분리하며, 이 과정은 침투량을 직접적으로 모형화 할 수 없으므로 지표 및 지표하, 지하수 흐름을 복합적으로 해석할 수 있는 모형이 질적이나 양적으로 부족한 실정이다. 이러한 지표하 흐름과 침투량을 산정하기 위하여 FE-FLOW, PM, MS-VMS, GMS, GW-VISTAS, ARGUS 및 MODFLOW와 같은 지하수 모형을 사용하고 있다. 본 연구에서는 지표하유출 산정을 위한 침투량의 비교분석을 위해 현재 가장 범용되는 지하수 유동 모델링 프로그램인 Visual Modlfow 모형과 GMS 모형을 이용하여 침투량 산정을 위한 수치 모의를 진행하였다. 각 모형의 입력자료는 2009년 국립방재연구원에서 수행한 침투실험시설 자료를 이용하여 동일한 조건을 부여하고, 두 모형의 비교를 위해 Visual Modflow에서는 MODFLOW의 기본 해석방법인 유한차분법(FDM)을 이용하고, GMS 모형에서는 3차원 유한요소해석이 가능한 GMS-FEMWATER를 이용하였다. 두 모형의 수치모의 조건으로 2009년 국립방재연구원에서 수행한 침투실험방법과 동일하게 공극률에 따른 투수성 보도블럭의 구분과 50mm/hr, 100mm/hr, 150mm/hr, 200mm/hr의 강우강도별 선행함수조건에 따른 수치모의를 진행하였으며, 수치모의된 침투량의 적정성을 판단하기 위하여 국립방재연구원의 침투실험 결과자료와 비교분석하였다. 침투실험 자료와 각각 수치모의된 침투량을 비교분석한 결과 서로 유사한 경향을 보이고 있으나 초기 침투시 상대오차가 비교적 크게 발생하였다. 이는 수치모형의 경우 수리실험과는 다르게 모의시작과 동시에 해당 강우강도의 침투가 시작되므로 초기 유입 유출량 발생시간의 차이가 종료시간까지 누적 침투량에 미치는 것으로 판단되며, 매개변수에 많은 영향을 받는 것으로 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.463-463
• /
• 2010

고휘도 고효율 백색 LED (lighting emitting diode)가 차세대 조명광원으로 급부상하고 있다. 백색 LED를 생산하기 위한 공정에서 MOCVD (유기금속화학증착)장비를 이용한 Epi wafer공정은 에피층과 기판의 격자상수 차이와 열팽창계수차이로 인하여 생성되는 에피결함의 제거를 위하여 기판과 GaN 박막층 사이에 완충작용을 해줄 수 있는 버퍼층 (Buffer layer)을 만들고 그 위에 InGaN/GaN MQW (Multi Quantum Well)공정을 하여 고휘도 고효율 백색 LED를 구현할 수 있다. 이 공정에서 기판의 온도가 불균일해지면 wafer 파장 균일도가 나빠지므로 백색 LED의 yield가 떨어진다. 균일한 기판 온도를 갖기 위한 조건으로 기판과 induction heater의 간격, 가스의 흐름, 기판의 회전, 유도가열코일의 디자인 등이 장비의 설계 요소이다. 코일에 교류전류를 흘려주면 이 코일 안 또는 근처에 있는 도전체에 와전류가 유도되어 가열되는 유도가열 방식은 가열 효율이 높아 경제적이고, 온도에 대한 신속한 응답성으로 인하여 열 손실을 줄일 수 있으며, 출력 온도 제어의 용이성 및 배출 가스 등의 오염 없다는 장점이 있다. 본 연구에서는 유도가열방식의 induction heater를 이용하여 회전에 의한 기판의 온도 균일도 측정을 하였다. 기초 실험으로 저항 가열 히터를 통하여 대류에 의한 온도 균일도를 평가하였다. 그 결과 gap이 3 mm일 때, 평균 온도 $166.5^{\circ}C$ 에서 불균일도 6.5 %를 얻었으며 이를 바탕으로 induction heater와 graphite susceptor의 간격이 3 mm일 때, 회전에 의한 온도 균일도를 측정을 하였다. 가열원은 induction heater (viewtong, VT-180C2)를 사용하였고, 가열된 graphite 표면의 온도를 2차원적으로 평가하기 위하여 적외선 열화상 카메라(Fluke, Ti-10)을 이용하여 온도를 측정하였다. 기판을 회전하면서 표면 온도의 평균과 표준 편차를 측정한 결과 2.5 RPM일 때 평균온도 $163^{\circ}C$ 에서 가장 좋은 5.5 %의 불균일도를 확인할 수 있었고, 이를 상용화 전산 유체 역학 코드인 CFD-ACE+의 모델링 결과와 비교 분석 하였다.

• 한국해양학회지
• /
• v.29 no.2
• /
• pp.83-94
• /
• 1994

Two-dimensional tidal and tidal residual currents in Chinhae Bay are investigated by field observations, hydraulic and numerical experiments. The results of hydraulic and numerical model experiments roughly coincide with the field measurements. Maximum tidal currents during the spring and neap tides in Kaduk and Kyunnaeryang channel and the central channel of Chinhae Bay are strong as 90 to 110 and 30 to 40 cm/s respectively, and strong tidal residual currents having numerous eddies take place. Maximum tidal currents during the spring and neap tides in the western and northern parts of the bay are weak as below 30 and 10 cm/s respectively, and also tidal residual currents are relatively weak. Tidal residual currents in the northern part of Kajo-do go toward the north, whereas the currents in the southern part move down the bay, and the currents rotating clockwise occur around Bu-do. The surface currents in the bay depend strongly on the wind and river inflow, and such phenomena are more remarkable during he neap tide than the spring tide.