• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.248-257
• /
• 2005

Statement of problem. Cortical bone plays an important role in the primary implant stability, which is essential to immediate/early loading. However, immediate load-bearing capacity and primary implant stability according to the change of the cortical bone thickness have not been reported. Purpose. The objectives of this study were (1) to measure the immediate load-bearing capacity of implant and primary implant stability according to the change of cortical bone thickness, and (2) to evaluate the correlation between them. Material and methods.48, screw-shaped implants (3.75 mm$\times$7 mm) were placed into bovine rib bone blocks with different upper cortical bone thickness (0-2.5 mm) and resonance frequency (RF) values were measured subsequently. After fastening of healing abutment. implants were subjected to a compressive load until tolerated micromotion threshold known for the osseointegration and load values at threshold were recorded. Thereafter, RF measurement after loading, CT taking and image analysis were performed serially to evaluate the cortical bone quality and quantity. Immediate load-bearing capacity and RF values were analyzed statistically with ANOVA and post-hoc method at 95% confidence level (P<0.05). Regression analysis and correlation test were also performed. Results. Existence and increase of cortical bone thickness increased the immediate load-bearing capacity and RF value (P<0.05) With the result of regression analysis, all parameter's of cortical bone thickness to immediate load-bearing capacity and resonance frequency showed significant positive values (P<0.0001). A significant high correlation was observed between the cortical bone thickness and immediate load-beating capacity (r=0.706, P<0.0001), between the cortical bone thickness and resonance frequency (r=0.753, P<0.0001) and between the immediate load-bearing capacity and resonance frequency (r=0.755, P<0.0001). Conclusion. In summary, cortical bone thickness change affected the immediate load-baring capacity and the RF value. Although RF analysis (RFA) is based on the measurement of implant/bone interfacial stiffness, when the implant is inserted stably, RFA is also considered to reflect implant/bone interfacial strength of immediately after placement from high correlation with the immediate load-baring capacity. RFA and measuring the cortical bone thickness with X-ray before and during surgery could be an effective diagnosis tool for the success of immediate loading of implant.

• Proceedings of the ESK Conference
• /
• 1993.04a
• /
• pp.111-123
• /
• 1993

TravTek이란 Travel Technology의 합성어이며, 미래의 여행자들이 차를 사용하여 여행할 때, 보다 편리하고 쾌적한 여행이 될 수 있도록 차에 컴퓨터단말기를 부착하여 현재 주행하고 있는 도로 를 차안에서 화면을 통하여 볼 수 있고, 컴퓨터가 최단경로를 운전자에게 제시하고, 도로의 상황과 여 행정보(즉 호텔, 관공명소, 행사안내등)를 컴퓨터화면으로 나타내고, 그 정보를 컴퓨터음성으로 들려 주는 것등이 TravTek 시스템의 주된 요소들이다. 현재 미국 플로리다주의 올란도시에서 GM회사가 TravTek 시스템을 설치한 차 100대를 가지고 10개의 기관이 합작으로 평가연구중에 있으며, 이 논문에서 다루고자 하는 것은 그중에서 이차의 인간공학적 평가로 제한하고자 한다. 이러한 시스템을 설치한 차 를 타고 여행할 때, 여행자가 과연 얼마나 안락하게 여행할 수 있으며, 도로의 체증현상을 줄이고, 사 고를 예방하며, 차의 설계와 목적이 인간공학적으로 합당한 가를 알아보고자 하는 연구이다. 인간공학적 평가 인자들은 (1) 운전자의 수행도, (2) 사용자 선호도, (3) 사용자 인식, (4) 운행정보등이다. 그리고 컴퓨터음성을 사용하였을 때와 사용하지 않았을 때의 두가지 경우와 (1) 움직이는 컴퓨터 지도를 사용하 였을 때, (2) 단순화 한 도로안내를 사용하였을 때, (3) 컴퓨터 지도를 사용하지 않았을 경우(종이지도 사용)에 관해 위의 4가지 인간공학적 인자들을 평가하고자 한다. 이 연구는 아직도 진행중이라 발표하 고자 하는 논문역시 현재까지의 연구결과를 토대로 발표하는 것이므로 완전한 결론을 내릴 수는 없고, 진행과정의 내용과 토의사항과 잠정적인 결론을 제시하고자 한다.기서 사용된 아이콘에 대해서만 타당한 것으로 이것을 모든 아이콘에 대해 일반화시키기는 어려우나 이후에 행해질 Icon-based User Interface 분야의 많은 연구들의 기초가 될 것이다. 더불어 아이콘과 관련된 많은 요인들(문화적 영향, 아이콘 색깔, 크기, 아이콘의 위치등이 인식에 미치는 영향)에 대해서도 연구가 행해져야 할 것이다. 확인하고 각각의 기능을 분명히 했다.가 수월하게 하였고 메모리를 동적으로 관리할 수 있게 하였다. 또한 기존의 smpl에 디버깅용 함수 및 설비(facility) 제어용 함수를 추가하여 시뮬레이션 프로그램 작성을 용이하게 하였다. 예를 들면 who_server(), who_queue(), pop_Q(), push_Q(), pop_server(), push_server(), we(), wf(), printfct() 같은 함수들이다. 또한 동시에 발생되는 사건들의 순서를 조종하기 위해, 동시에 발생할 수 있는 각각의 사건에 우선순위를 두어 이 우선 순위에 의하여 사건 리스트(event list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shal

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.3
• /
• pp.7-13
• /
• 2015

Occupant protection performance in frontal crashes has been developed and assessed for mainly front seat occupants over many years, and in recent years protection of rear seat occupants has also been extensively discussed. Unlike the front seats, the rear seats are often occupied by children seated in rear-facing or forward - facing child restraint systems, or booster seats. In the ENCAP, child occupant protection assessments using 18-month-old(P1.5) and 3-year-old(P3) test dummies in the rear seat have already been changed to new type of 18-month-old (Q1.5)and 3-year-old(Q3) test dummies. In addition, ENCAP are scheduled with the development and introduction of test dummies of 6-year-old (Q6) and 10.5-year-old children(Q10) starting 2016. In KNCAP, Q6 and Q10 child dummies will be introduced in 2017 as well. Automobile manufacturers need to develop safety performance for new child dummies closely. In this paper, we focused on Q6 and Q10 child dummies sitting in child restraint system. Offset frontal crash tests were conducted using two types of test dummies, Q6 and Q10 child dummies, positioned in the rear seat. Q6 and Q10 were used to compare dummy kinematics in rear seating positions between Q6 behind the driver's seat and Q10 behind the front passenger's seat. The full vehicle sled test results of both dummies were conducted with different restraint systems. It showed that several injury and image data was collected as the result of the full vehicle sled test. Based on the results of these investigations, this paper describes which factor is most important and combination is the best performance when evaluating rear seat occupant protection for Q6 and Q10 child dummies.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.4
• /
• pp.7-12
• /
• 2018

Injury mechanisms of lower extremity injuries in motor vehicle accidents are focused on fractures, sprains, and contusions. The purpose of this study is to evaluate the analysis of lower extremity injury mechanism in occupant motor vehicle accident by using Hospital Information System (HIS) and reconstruction program, based on the materials related to motor vehicle accidents. Among patients who visited the emergency department of Wonju Severance Christian Hospital due to motor vehicle accidents from August 2012 to February 2014, we collected data on patients with agreement for taking the damaged vehicle's photos. After obtaining the verbal consent from the patient, we asked about the cause of the accident, information on vehicle involved in the accident, and the location of car repair shop. The photos of the damaged vehicle were taken on the basis of front, rear, left side and right side. Damage to the vehicle was presented using the CDC code by analytical study of photo-images of the damaged vehicle, and a trauma score was used for medical examination of the severity of the patient's injury. Among the 1,699 patients due to motor vehicle crashes, 88 (5.2%) received a diagnosis of lower extremity fracture and 141 (8.3%) were the severe who had ISS over 15. Nevertheless during 19 months for research, it was difficult to build up in-depth database about motor vehicle crashes. It has a limitation on collecting data because not only the system for constructing database about motor vehicle crash is not organized but also the process for demanding materials is not available due to prevention of personal information. For accurate analysis of the relationship between occupant injury and vehicle damage in motor vehicle crashes, build-up of an in-depth database through carrying out various policies for motor vehicle crashes is necessary for sure.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.55-60
• /
• 2021

In order to produce wearable displays with high adhesion while maintaining flexible characteristics, the adhesive method using electro plating method was carried out. Laser lift-off (LLO) transcription was also used to remove sapphire substrates from LEDs bonded to fibers. Afterwards, the SEM and EDS data of the sample, which conducted the adhesion method using electro plating, confirmed that copper actually grows through the lattice of the fiber fabric to secure the light source and fiber. The adhesion characteristics of copper were checked using Universal testing machine (UTM). After plating adhesion, the characteristics of the LLO transcription process completed and the LED without the transcription process were compared using probe station. The electroluminescence (EL) according to the enhanced current was measured to check the characteristics of the light source after the process. As the current increases, the temperature rises and the bandgap decreases, so it was confirmed that the spectrum shifted. In addition, the change in the electrical characteristics of the samples according to the radius change is confirmed using probe station. The radius strain also had mechanical strength that copper could withstand bending stress, so the Vf variation was measured below 6%. Based on these results, it is expected that it will be applied to batteries, catalysts, and solar cells that require flexibility as well as wearable displays, contributing to the development of wearable devices.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.43-52
• /
• 2022

Recently, the government has been expanding the supply of hydrogen vehicles according to the roadmap for vitalizing the hydrogen economy, but is developing safety assessment and inspection technology for the relevant vehicles. This study analyzed the prevention of hydrogen bus accidents' economic effect that arises from the application and development of large-capacity CHSS oil pressure repetition-test assessment technology, hydrogen bus internal chamber pressure transmission and emission volume inspection technology, among various technologies capable of assessing the safety of a hydrogen bus fuel system. To this end, the contingent valuation method (CVM), one of the value evaluation methods of non-market goods, was applied to investigate users' willingness to pay for each inspection technology. The survey for users' willingness to pay was conducted by attaching posters to promote surveys on the internet and within buses to the entire public. As a result of the analysis, the average WTP of the hydrogen bus internal chamber pressure transmission volume inspection technology was 25.3 KRW, the average WTP of the hydrogen bus internal chamber pressure emission volume inspection technology was 18.6 KRW, and the average WTP of the large-capacity CHSS oil pressure repetition-test assessment technology was measured at 16.7 KRW. In addition, the costs and benefits of the introduction of the relevant inspection technology were defined through the interviewing of experts at related research institutions and businesses. As a result of conducting an economic analysis (4.5% discount rate) according to the development of each inspection technology, economic feasibility was seen in all assessment and inspection technologies. As much as the technology is indispensable for the safe use of hydrogen buses, it shows that investment in related technology is very necessary in the future. However, because it was decided that the relevant analysis will differ according to the distribution rate of hydrogen buses, further analysis following this future distribution rate of hydrogen buses is needed, and future users should be made clearly aware of the safety and environmental nature of the technology.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.85-91
• /
• 2024

In this study, we investigated a method of growing single crystal 𝛽-Ga₂O₃ thin films on a c-plane sapphire substrate using MOCVD. We confirmed the optimal growth conditions to increase the crystallinity of the 𝛽-Ga₂O₃ thin film and confirmed the effect of the ratio between O₂ and Ga precursors on crystal growth on the crystallinity of the thin film. The growth temperature range was 600~1100℃, and crystallinity was analyzed when the O₂/TMGa ratio was 800~6000. As a result, the highest crystallinity thin film was obtained when the molar ratio between precursors was 2400 at 1100℃. The surface of the thin film was observed with a FE-SEM and XRD ω-scan of the thin film, the FWHM was found to be 1.17° and 1.43° at the and (${\bar{2}}01$) and (${\bar{4}}02$) diffraction peaks. The optical band gap energy obtained was 4.78 ~ 4.88 eV, and the films showed a transmittance of over 80% in the near-ultraviolet and visible light regions.

• Clean Technology
• /
• v.10 no.2
• /
• pp.73-87
• /
• 2004

In most of industrial fields, cleaning is employed for removing soils on their products or parts. Halogenated cleaning agents such as CFC-113, 1,1,1-TCE(1,1,1-trichloroethane), MC(methylene chloride) and TCE (trichloroethylene) have been used as cleaning ones in most of companies in the world since their excellent performance of cleaning ability and good material compatibility. However, CFC-113 and 1,1,1-TCE which are ozone destruction substances are not used any more in the advanced countries because of the which are ozone destruction substances are not used any more in the advanced countries because of the Montreal protocol. MC and TCE are now used restrictively at small part of industrial fields in most of countries since they are known to be hazardous or carcinogenic materials. Thus, it is indispensible that the alternative cleaning agents which are environmental-friendly and safe, and show good cleaning ability should be developed or utilized for replacement of the halogenated cleaning agents. Aqueous/semi-aqueous cleaning agents are evaluated to be promising alternative ones among various alternatives in environmental and economical view point. In this study, commercially available 12 aqueous and 6 semi-aqueous cleaning agents were selected and their physical properties, cleaning abilities, rinsing abilities and recycling of contaminated rinse water were measured and analyzed. Aqueous cleaning agents with higher wetting index showed better cleaning ability compared with those with lower wetting index. However wetting index did not have any correlation with cleaning ability in semi-aqueous cleaning agents. It was observed that soil concentration in aqueous and semi-aqueous cleaning agents should be maintained below the certain concentrations which depend on types of clearing agents. More than 70% soils in contaminated rinse water by some of aqueous and semi-aqueous clearing agents could be separated by simple settling method. This means that some cleaning agents with high oil-water separation efficiency will be effiective for recycling oil-contaminated rinse water. It was found that contaminated rinse water with aqueous agents was purified easiy by ultrafiltration method with PAN membrane of 30 kDa.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.39-44
• /
• 2020

Recently, numerous researches are being conducted in flexible substrate to apply to wearable devices. Particularly, Conductive substrate researches that can implement the wearable devices on clothing are massive. In this study, we formed fiber substrate spraying CNT and Pd mixed solution on it and plated metal layer with electroless plating. Used SEM equipment and EDS analysis to analysis structure of the plated fiber substrate and discovered Ni layer was created. For check electrical properties, mapping was performed to check surface resistance and distribution of resistance of electroless plated fiber substrate with 4-point probe. It was confirmed that conductivity was improved as the duration of electroless plating was increased, and it was found that distribution of resistance by surface location was uniform. Changes in resistance due to mechanical stress were measured through tensile, bending, and twisting tests. As a result, it was confirmed that resistance change of flexible substrate gradually disappeared as plating time increased. Using UTM (Universal testing machine), it was analyzed mechanical properties of the electroless plated substrate with respect to changes in plating time were improved. In the case of conductive fiber substrate in which electroless plating was performed for 2 hours, tensile strength was increased by 16 MPa than fiber substrate. Based on these results, we found that Ni-CNT-Fabric flexible substrate is adequate for clothing-intergrated conductive substrate and we positively expect that this experiment shows flexible substrate can adapt to and develop not only a wearable device technology but also other fields needing flexibility such as battery, catalyst and solar cell.

• The Journal of Korean Philosophical History
• /
• no.27
• /
• pp.197-222
• /
• 2009

The Reform Movement(戊戌變法) of 1898 was a boundary tablet of modern history of science and technology which inherited the past and ushered in the future. Kang Youwei(康有爲), as a leader, his scientific thoughts opened up the way of Chinese enlightenity campaign and pushed the development of Chinese modem science and had an important position in modem history of scientific thoughts. The dissertation analyses the source, establishment and content of Kang Youwei. Kang Youwei developed the useful and discarded the useless of the view of implement science held by the Westernized Party, undertook a deep and throughout thinking on the nature of science, had cognition of scientific methods and spirit, by which he criticized negative proneness of ancient Chinese views of science. He put forwards a series of practical suggestions on political reform that provided a solid guarantee and support in system for scientific development. Kang Youwei rooted in the soil of Chinese traditional academic culture, but also western learning in modern western civilization. Kang go through Westernization Movement since the in-depth study of Western natural and inevitable outcome of the social sciences, are giving to science and technology. Although he was originally of Western "science" has a lot of misunderstandings and prejudices, but these shallow hazy perceptual knowledge, his view of science which constitutes the basis of the formation. In the course of scientific inquiry, Kang has begun to explore the essence of scientific development. He has a gut feeling that behind the scientific discovery of the existence of a force, which is the scientific truth and is used to grasp the scientific method. After contact with the Western world, with the traditional "Heaven(天)", and modern Chinese intellectuals began to "axiom(公理)" to recover his traditional "Heaven" of the new understanding is reflected mainly in "Zhutianjiang(諸天講)". "Zhutianjiang" is the Kang Yuwei in the absorption of traditional astronomy knowledge base, will the traditional arithmetic, as well as Buddhism and the West since the twentieth century, new knowledge of astronomy combines written. Kang while recognizing that scientific instruments, is nothing more than an extension of the role of the human senses and make the "Dao(道)" is more clear, but the "artifacts(器物)" caused by the inherent limitations of the limited nature of human knowledge, which is "Heaven" boundless nature of the broad terms, refused to concede defeat to. In reality, the activities of political reform, he gradually recognize this real-world helpless, and he recognized that the real world to achieve common ground of social ideal is impossible, so he chose comfort in life that people really get a stage of "Tianyou(天遊)". This is the cause that his writing "Datongshu(大同書)", at the same time, followed by writing "Zhutianjiang" talk "Tianyou".