• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.409-416
• /
• 2016

The contact force characteristic between the pantograph and the catenary wire represents the current collection quality of trains; it should be precisely controlled under international standard. Recently, a noise reduction cover has been installed around the pantograph of high speed trains. However, little study on the contact force by the pantograph cover has been conducted. In this study, the impact on the current collection performance of the pantograph cover was analyzed by dynamic contact force measurement using a next generation high speed train (HEMU-430X). As a result, it was confirmed that the attachment of a pantograph cover could lower the mean contact force by approximately 50N at 300km/h. In addition, the pure difference of the average contact force by the presence of pantograph cover, except for the static pressure, was measured and found to be up to 110N at 300km/h. It was also found that the standard deviation of the contact force of 3~5N could be changed by use of a pantograph cover.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.567-574
• /
• 2011

Aluminum extruded panels are widely used instead of corrugated steel panels for weight reduction in high-speed trains. Of the layers in the train body, it makes the largest contribution to the sound insulation. However, compared with that of a flat panel with the same weight, the TL of the aluminum extruded panel is remarkably lower in the local resonance frequency band. We study aluminum extruded panels for next-generation 400-km/h trains. We investigate the problem of sound insulation and propose a practical method to improve the sound-insulation performance. The local resonance frequency region is increased by a modification of the core structure, and urethane foam is placed in the core. The effect on the sound insulation is verified by experiments. Finally, the improvement for the entire sound-transmission loss is estimated for the layered floor panels of express trains.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.391-397
• /
• 2011

In this paper, the pressure endurance test of passenger train's glass window which was developed for next high speed train was studied. At first, pressure test equipment which will be able to generate the maximum pressure same as crossing case between two trainsets in the tunnel was developed. Afterwards the pressure test and evaluation that are based on NFF31-314 were carried out and studied.

• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.300-310
• /
• 2008

Through this study, a conceptual design for the next generation high-speed EMU has been derived to meet the crash worthiness requirements of the Korean rollingstock safety regulation. The crashworthiness regulations require some performance requirements for two heavy collision accident scenarios; a train-to-train collision at the relative speed of 36 km/h, and a collision against a standard deformable obstacle of 15 ton at 110km/h. The complete train set will be composed of 2TC-6M with 13 ton axle load, which is different from KTX with the power car of 17 ton axle load. Using theoretical and numerical analyses, a crashworthy conceptual design was derived in terms of mean crush forces and energy absorptions for principal crushable structures and devices. The derived conceptual design was evaluated and improved using one dimensional dynamic simulations for the bar-spring-damper-mass model. It is shown from the simulation results that the suggested conceptual design can easily satisfy domestic crashworthiness requirements.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.230-235
• /
• 2003

최근의 무선통신 시스템은 유지, 보수 및 구축이 유선통신 시스템에 비해 용이하고 이동성을 제공할 수 있다는 장점에 의해, 열차, 차량, 미사일 등의 이동체 제어와 관련된 분야에서의 연구가 활발히 진행되고 있다. 열차 또는 차량 제어와 같이 안전성이 중요시되는 분야에 있어서 전파에 의한 무선 링크는 가장 문제가 되는 부분으로서, 일반적으로 통신시스템은 어느 한 경로에서 고장이 발생하더라도 설계시 정해진 일정수준의 기능을 제공하는 생존성(survivability)을 지니도록 설계되어진다. 이와 관련한 연구와 개발은 대부분 공중 전화망과 고속 데이터 통신망을 대상으로 수행되었다. 본 논문에서는 유럽의 차세대 열차제어시스템에 적용하기 위해 기존의 유럽 표준 이동통신 시스템인 GSM(Global System for Mobile Communications)을 철도분야의 특수성에 맞도록 보완한 GSM-R(GSM-Railway)을 사례로 무선통신 시스템의 생존성을 검토한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.432-433
• /
• 2013

• Journal of the Korean Society of Systems Engineering
• /
• v.3 no.2
• /
• pp.17-24
• /
• 2007

The HEMU-400X(High-speed Electric Multiple Unit 400km/h eXperiment) project starts in 2007. It is required to control and balance the systems engineering activities throughout the project life cycle for a successful completion of the project. The Systems Engineering Management Plan(SEMP) is the primary, top level technical management document for the integration of all engineering activities within the context of, and as an expansion of, the project plan. A SEMP should be prepared for each project and regularly updated as development progresses. This paper proposes the systems engineering management plan for the HEMU-400X project.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.165-170
• /
• 2014

The resistance to motion of the Korean next-generation high-speed train (HEUM-430X) was assessed on the basis of 12 coasting test runs at coasting speeds up to approximately 380km/h. Two different methods, a linear regression method and a time-integral method, were employed to calculate decelerations from the time-velocity data and the time-distance data, respectively, and an equation of resistance to motion was devised from the deceleration data calculated at each time section. The effect of an improvement of the aerodynamic shape on the resistance to motion was investigated, with the results showing that the running resistance was reduced by about 15% due to these improvements. An increase of approximately 28% of the running resistance was also noted when running in a tunnel relative to running through an open field.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.741-751
• /
• 2002

21세기 무한경쟁시대에 대비하여 국가산업의 경쟁력제고는 물론 지역의 균형발전을 위해 추진하고 있는 경부고속철도 건설사업은 2004년 4월 개통을 목표로 마무리 단계에 접어들었다. 경부고속철도 건설사업을 통하여 우수하고 완벽한 성능의 고속열차도입과 함께 첨단기술을 이전받아 기술수준을 향상시켰고 G7 연구개발 사업으로 시속 350Km급의 차세대 차량을 설계, 제작할수 있는 능력을 보유하게 되었다. 철도는 육로 교통수단과 달리 시스템적 특성이 매우 강하다. 즉 토목, 건축, 기계, 전기, 전자 등 각 분야의 균등한 기술발전을 도모하여야 철도선진국에 진입할 수 있으며 해외 진출이 가능하다. 사업 추진과정에서 습득한 각종 기술은 향후 건설사업의 독자적 추진을 가능케 하였으며, 철도차량의 제작사뿐만 아니라 부품업체가 해외시장을 개척할 수 있는 능력을 갖추어 철도 선진국으로 도약할 수 있는 기틀을 마련하였다.

• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.396-404
• /
• 2009

With developing the next generation high speed railway, there need to be plans to make sure of running safety though researchs on the crack and break of rail by rolling contact fatigue. Therefore, this study performed the parametric analysis effecting on the fatigue life of rail using simplified equations. It analyzed the internal stress of rail according to the track quality, train velocity, wheel radius, track stiffness, sleeper space, wheel load. For the more, via the finite element method, it analyzed shear force on the rail head which could be changed by the early length of crack, angle of crack and temperature. As a result, this study continued the main parameter effecting on the fatigue life of rail.