• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1031-1033
• /
• 2008

차세대 한국형 고속열차는 분산형 시스템으로 최고속도 400km/h, 운행속도 350km/h을 목표로 개발중에 있다. 차세대 고속열차의 신호시스템은 기존선의 자동열차정지(ATS, Automatic Train Stop) 및 자동열차방호(ATP, Automatic Train Protection)와 고속선의 자동열차제어(ATC, Automatic Train Control) 신호방식을 모두 사용하는 ATP+ATS+ATC 형태의 차상장치가 개발 설치될 예정이다. 따라서 이러한 장치의 개발과 연계하여 차세대 한국형 고속열차는 기존 경부고속선에서 시험주행을 할 예정이다. 따라서 기존 경부고속선에서 차세대 고속열차의 최고 속도시험를 위한 신호분야의 방안을 검토하고자 한다. 본 논문에서는 3가지의 방안을 제시하여 적합성과 운영효율성을 고려하여 최적의 방안을 도출하는 방식으로 전개할 예정이다.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.670-677
• /
• 2009

This paper is a study of testing on-board signalling equipment in advanced high speed rail at the maximum speed of 400km/h. The on-board signalling equipment in advanced high speed rail provides operating information to the driver when operating at ATC, ATS, and ATP sections, and maintains safety from driver oversight, signalling equipment malfunction, natural disasters and so on. Since the testing train performance of advanced high speed rail at 400km/h must include the function test of on-board signalling equipment, this thesis focuses on the function test of on-board signalling equipment and analyze the necessity of the test at the maximum speed. Finally, it is suggested to change some infrastructure and to use specific test methods to test the train performance at the maximum speed in high speed line ATC section.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.186-193
• /
• 2015

In this paper, a reliability growth analysis for a next-generation high-speed train was conducted. First, the high-speed train was decomposed into 6 sub-systems and main equipment of the high-speed train was derived from functional diagrams. Next, failure rates were calculated for each sub-system from the failure data obtained during commissioning tests. Then, reliability growth analysis was conducted for the high-speed train using the Duane model. The results show that activities to increase reliability were carried out throughout the test runs from the reliability growth results.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.461-469
• /
• 2015

The next generation high-speed train, HEMU-430X, was developed and is now being tested. However, the existing mode choice models based on the guidelines for feasibility studies do not consider a high-speed train with a higher speed than KTX. This limitation might result in inaccurate demand forecasting. In this research, a stated preference survey was conducted in order to supplement the problem by considering the characteristics of HEMU-430X. Based on the survey results, this research developed two mode choice models, including a multinomial logit model and a nested logit model. For this purpose, the utility functions of travel time and travel costs were estimated using a Limdep 8.0 NLOGIT 3.0 package. After comparing the two models, it was concluded that the nested logit model is appropriate. The paper suggested a plan to implement the nested logit model and presented a policy implication.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.127-131
• /
• 2009

시스템 엔지니어링을 수행하기 위해서는 전산지원도구의 사용이 필수적이다. 전산지원 도구를 이용하여 시스템 엔지니어링을 수행할 때 제일 먼저 수행해야 할 작업은 스키마를 구축하는 것이다. 스키마의 구축은 사용할 데이터의 종류, 각 데이터의 속성 그리고 각 데이터간의 연관관계를 정의하는 것으로 세분화 될 수 있다. 본 논문에서는 차세대 고속열차 기술개발 사업에서 사용하고 있는 시스템엔지니어링 전산지원도구인 Cradle(R)의 스키마를 구축한 사례에 대해서 소개하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.81-87
• /
• 2017

This paper describes the dynamic behavior and enhancement of Korean high-speed trains. The tail vibration reduction method of the yaw damper installation method change, which was derived from previous research, was applied to the running test of high-speed train. In addition, the vibration reduction method for the entire vehicle was derived by a numerical method and its effect was confirmed by a running test. The improved design was applied to the double-deck high-speed train coaches and the commissioning proceeded without problems in dynamic behavior. Sensitivity analysis of the suspension parameters affecting the critical speed of Korean next-generation high-speed trains was performed and four design variables that greatly affected the critical speed were derived. These were in the order of the primary elastic joint x-directional stiffness, the secondary yaw damper series stiffness, the secondary lateral damper damping coefficient, and the carbody damper damping coefficient. By optimizing the design variables, the suspension parameter that improves the critical speed by 23.3% can be used in the commercial designs of Korean next-generation high-speed trains.

• Journal of the KSME
• /
• v.50 no.5
• /
• pp.52-55
• /
• 2010

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.343-351
• /
• 2012

With the cooperation of many research institutes and railway companies, the next generation high speed train is under development for many years. To confirm the safety requirement of the developed high speed train, multibody dynamic analysis is implemented. Through this analysis, railway derailment and lateral guiding force simulation was evaluated according to UIC code 518 OR for international railway vehicle. Test results were compared by limit value of safety criteria. Safety evaluation results, according to international standards, would provide basic reference data of ensuring safety speed and track radius curve. The safety of the train at the maximum speed is verified by numerical analysis results.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.81-82
• /
• 2015

차세대 고속철도 기술개발 사업을 통해 개발된 통합차상신호 시스템은 국내에서 운영중인 세가지 신호시스템인 ATP, ATC, ATS의 신호를 모두 처리하면서 열차 운행의 중단 없이 열차 운행구간을 이동하게 된다. 현재 통합차상신호시스템의 신뢰성과 안정성 확인을 위해 차세대 고속철도 시제차인 HEMU-430X에 탑재하여 시운전을 진행중에 있는데, 시운전이 여객열차의 영업운전 사이에 진행되기 때문에 다양한 실험과 검증에 많은 제약이 따른다. 이러한 제약 사항을 해결하고 다양한 실험과 개선 활동을 위해 통합차상신호시스템을 실험실내에서 테스트할 수 있는 통합차상신호시스템용 시뮬레이터의 개발이 필요하게 되었고, 본 논문에서는 통합차상신호시스템용 시뮬레이터 개발에 관한 내용을 다룬다.

• Journal of the KSME
• /
• v.50 no.5
• /
• pp.32-35
• /
• 2010