• Korean Security Journal
• /
• no.50
• /
• pp.307-337
• /
• 2017

The freedom of assembly is the fundamental freedoms guaranteed by the Constitution. However, as far as our reality is concerned, the freedom of assembly is guaranteed only when it is under the control of the police, and otherwise it is perceived as an object to be suppressed. Police say even that they will not tolerate even a small illegal law while referring to the "broken window theory". Therefore, regardless of the peaceful nature of the rally, it is too obsessed with 'compliance'. This attitude is causing the citizens who participated in the assembly to be put to the object to be suppressed. This paper analyzes the requirements and current status of police force, focusing on the vehicle-wall-blocking and water cannon as a means of using the police force, which is a recent problem, and suggests ways to improve it. First of all, the installation of the wall cuts off the essential communication function of the assembly by separating the meeting place from the object of protest. Thus, despite the warning for prevention in the face of illegal acts, other than installing a barrier, it should be allowed only in the 'urgent case where there is a risk of causing damage to the life, body or property of the person'. Without this urgency, the vehicle-wall-blocking should not be allowed to be proactive as well as preventive. Secondly, the water cannon is a police force that is likely to harm people's life and body. Therefore, aiming shots, which could pose a significant risk to the human body, should in principle be prohibited. However, considering its risk, it should be supplementary used only when there is no other alternative, only when the direct risk to the legal interest of the other person or the order of public well-being is 'obvious'. In addition, as for the use standard of such a thing, it is necessary to be specified by law.

• Current Research on Agriculture and Life Sciences
• /
• v.9
• /
• pp.103-108
• /
• 1991

The chemical characteristics of lignin in the differentiating xylem were investigated and compared with those of mature-wood. The compound middle lamella lignin deposited in the early stage of lignification of cell walls in the softwood(Larch) as well as the hardwood(Birch) was confirmed to be the so-called guaiacyl-type lignin and was found to have a relatively larger content of phenoxy hydroxyl group as terminal units and to be more abundant in condensed-type structures like as phenylcoumaran structures compared with mature-wood lingin.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.1-11
• /
• 2006

Grafted tissues were investigated using various microscopic techniques. Pinus thunbergii was used as stock and scion and autografted by cleft graft method. Histochemically, grafting processes can be proceeded by four stages: 1) formation of necrotic layer, 2) proliferation of callus, 3) development of neo-cambium from callus, and 4) restoration of new vascular xylem. Necrotic la yer composed of pectin and lignin was gradually degraded during grafting process and disappeared when new union was formed between stock and scion. A large number of starch and lipid bodies in the cytoplasm were also gradually degraded during grafting process and disappeared at the grafting interface. Nucleus and plasmodesmata were not changed. Bubble-like callus was generated from all living parenchyma cells and from the callus. The tracheary elements differentiated from the callus had either reticulate or pit-like thickenings in the secondary walls with bordered pits. Secondary cell wall thickening occurred toward filing to the void parts between reticulated secondary wall. Tracheids formed in the secondary xylem were short with irregular wall thickness. New secondary xylem cells with swirled shapes, which developed in graft union were oriented horizontally and obliquely to axis of the stem.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.180-183
• /
• 2008

탄소 나노 튜브(CNT)들로 구성된 다중벽 탄소 나노튜브 진동은 분자사이의 역학적인 시뮬레이션에 의해 조사되었다. 그 결과는, 벽간의 결합이 주파수 분할을 이끌고 세개의 주파수 제너레이터로써의 2차 함수 벽, 5차 벽, 6차벽으로 된 오실레이터와 직경으로부터 독립적인 적합성 제안을 위해 지속적인 세개의 정점이 있다는것을 보여준다. 더욱이 적어도 MWCNT 진동의 초기의 주파수중 하나는 이중벽진동의 초기주파수보다 낮다.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.152-158
• /
• 2007

Micromorphological and chemical characteristics of living Castanea spp. and Tamarix spp. attacked by a brown-rot fungus were examined. Micromorphological features of brown-rotted hardwood species were similar to those observed in softwoods such as losses in birefringence under polarized microscopy, preferential degradation of $S_2$ layer and cracks in the $S_3$ layer. Thinning of the secondary cell wall in fibers was also observed, although it did not seem to be the main symptom. FT-IR analysis showed that bands assigned to cellulose and hemicelluloses decreased or disappeared, whereas the bands assigned to lignin increased. X-ray diffraction analysis exhibited the decrease of relative crystallinity, indicating that degradation of hardwood by a brown-rot fungus was in the advanced stages.

• Journal of Korean Society of Forest Science
• /
• v.53 no.1
• /
• pp.44-55
• /
• 1981

Neutral sulfite precooked fir chips were refined in the Asplund Laboratory Defibrator at various temperature ($20^{\circ}C$, $120^{\circ}C$ and $180^{\circ}C$). The effects of refining temperatures on the physical property and morphological structure of the resulting pulps were discussed. Yields of precooked chips (84%, 92% and 100%) and refining temperature affected remarkably the yield of refined pulp, its beatability, sheet strength and morhphological characteristics. Pulp yield and beatability decreased with increasing refining temperature. Fiber surface of unbeaten pulp from precooked chips of 84% yield was to some extent covered by the secondary wall, while that of the pulp form precooked yield of 92% by the compound middle lamella. In the case of uncooked chips, fibers were damaged heavily, and the exposed fiber surface resulted from the equal amount of the secondary wall and the compound middle lamella. In the case of pulps prepared from precooked chips of higher yields (92% and 100%), sheet strength increased linearly as sheet density increased. But at the same sheet density, pulp from lower precooked yield (84%) had better sheet strength after open discharge refining as compared to pressurized refining, because pulp from the former had much amounts of fines fraction of higher water retention value than the latters. And there was observed a little difference in fiber length distribution but nearly similar in its morphology with increasing refining temperature.

• 한국문화재보존과학회:학술대회논문집
• /
• 2001.11a
• /
• pp.27-34
• /
• 2001

Following the recommendations made by the cultural authorities the wooden cultural properties (WCP) had been treated with fire-retardants for fire protection. However, visual inspections of some of the WCPs treated with fire-retardants showed microbial decay. The work was extended to examine the micromorphological characteristics of the WCPs in a Buddhist temple which had been treated with fire-retardant. Microscopic examination showed the presence of typical soft rot cavities along the length of microfibrils in the secondary wall. Bacterial attack was also observed by scanning and transmission electron microscopy. It is interesting that the decay patterns observed in the Buddhist temple were very similar to those observed in the waterlogged woods. Presumably chemicals in the fire-retardants used rendered the wood susceptible to attack by soft-rot and bacterial decay by causing an increase in the moisture content of wood. Further studies are needed to investigate the effect of fire-retardants used currently on the hygroscopicity and the strength of wood materials in the WCPs. Microbial attacks caused degradation of the secondary cell walls and in some cases also of the middle lamella. In addition, the cell walls in the outer parts of wood were also degraded due to weathering, and cell separation occurred from total disintegration of the middle lamella.