• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.161-164
• /
• 2010

The surface roughness of wheels and rails are known to be major contributory factors in wheel-rail rolling noise. Generally, the rail roughness was greater than the wheel roughness. Generally, rolling noise sizes and noise level in compliance with wheel/rail roughness almost are reported with the fact that is similar. Rolling noise important factors rightly being in compliance with roughness of contact point regions of the wheel/the rail, presented from the present paper.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.481-484
• /
• 2008

The important factor to evaluate the running safety of a railway vehicle would be the interaction force between wheel and rail(derailment coefficient), for which is one of important factors to check the running safety of a railway vehicle that may cause a tragic accident. Element that analyze derailment coefficient is consisted of wheel load and lateral force. In this paper, studied about method that calculate vertical force(wheel load) by bending load of axle in rolling stocks.

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.616-622
• /
• 1998

An analytical method has been developed to estimate the dynamic contact force between wheel and rail when trains are running on rail with vertical irregularities. In this method, the effect of Hertzian deformation at the contact point is considered as a linearized spring and the wheel is considered as an sprung mass. The rail is modelled as a discretely-supported Timoshenko beam, and the periodic structure theory was adopted to obtain the driving-point receptance. As an example, the dynamic contact force for a typical wheel/rail system was analysed by the method developed in this research and the dynamic characteristics of the system was also discussed. It is revealed that discretely-supported Timoshenko beam model should be used instead of the previously used continuously-supported model or discretelysupported Euler beam model, for the frequency range above several hundred hertz.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.854-859
• /
• 2008

In a railway vehicle, contact between wheel and rail is a peculiar characteristic and variations of wheel and rail profile influence on the dynamic characteristics of railway vehicle. Thus the variations of the wheel and rail profile are very important in railway dynamics. Recently a research relating to active steering to improve the curving performance of vehicle is progressing actively at home and abroad. In this field, a pre-study for the wheel/rail contact geometry is needed and especially the variation of the wheel/rail contact geometry with wheel wear is the key design parameter to develop the controller of the active steering bogie. In this paper, we have experimentally studied to analyze the variation of the wheel/rail contact geometry with wheel wear as a pre-study to develop the active steering bogie for electric multiple unit (EMU). For this, we have made an experiment with EMU operating in curving area. We have measured the wear profiles of the wheel of the test vehicle and analyzed the wheel/rail contact geometry with a mileage of the test vehicle. In experiment with test vehicle, we have got the useful data to design the steering controller of the wheelset.

• Journal of the Korea Society for Simulation
• /
• v.30 no.1
• /
• pp.127-137
• /
• 2021

The method of utilizing the strain and vibration values of rails is primarily used to diagnose the condition of wheels and railroad facilities. The dynamic load is measured under the assumption that the strain of the rail and the load of the railroad vehicle are proportional. Wheel condition is measured under the assumption that the magnitude of the defect and the magnitude of the rail vibration are proportional. However, environmental factors affecting the strain and vibration of the rail such as vehicle speed, wheel load, climate, and track conditions are not reflected, many errors occur depending on the measurement conditions. In this study, the effect of track distortion, which is a major indicator of the track condition among the environmental factors that affect the strain and vibration of the rail, on the strain and vibration of the rail, was examined through dynamic simulation. As a measure to reduce the measurement deviation, the effect of securing additional measurement points was analyzed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.895-904
• /
• 2008

CWR (Continuous Welded Rail) may be broken when a temperature drop below the neutral temperature changes in axial force, causing tensile fracture and rail gap, in winter. Rail-breaks may lead to the damage of the rail and wheel by dynamic load, and the reduction of running safety if not detected before the passage of a train. In this study, the track and train coupled model with open gap for dynamic interaction analysis, is proposed. Linear track and train systems is coupled by the nonlinear Herzian contact spring and the complete system matrices of total track-train system is constructed. And the interaction phenomenon considering open gap, was defined by assigning the irregularity functions between the two sides of a gap. Time history analysis, which have an iteration scheme such as $Newmark-{\beta}$ method based on Modified Newton-Raphson methods, was performed to solve the nonlinear equation. Finally, numerical studies are performed to assess the effect of various parameters of system, apply to various speeds, open gap size and the support stiffness of rail.

• Journal of KSNVE
• /
• v.10 no.3
• /
• pp.444-450
• /
• 2000

Wheel-rail noise is normally classified into three catagories : rolling impact and squeal noise. In this paper rolling noise caused by the irregularity between a wheel and a rail is analysed as follows: The irregularity between the wheel and the rail is assumed as linear superposition of sinusoidal profiles. Wheel-rail contact stiffness is linearized by using Hertzian contact theory and then contact force between the wheel and the rail is calculated. vibration of the rail and the wheel is calculated theoretically by receptance method or FEM depending on the geometry of the wheel or the rail for the frequency range of 100-500 Hz important for noise generation. The radiation noise caused by those vibration response is computed by BEM To verify this analysis tools rolling noise is calculated by proposed analysis steps using typical roughness data and these results are compared with experimental rolling noise data. This analysis tools show reasonable results and finally used for the prediction of the Korean high speed train rolling noise.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.358-364
• /
• 1999

A wheel/rail contact module for dynamics analysis of railway vehicles is developed. The developed module is based on non-linear contact and FASTSIM algorithm which calculates contact forces. And the module is incorporated into the general purpose program DADS using user-defined subroutines. The simulation results of this developed program is compared to those of the railway vehicle dynamics analysis program AGEM. Since the module is based on DADS, various simulation environments can be considered.

• 전기의세계
• /
• v.39 no.5
• /
• pp.68-75
• /
• 1990

급속한 경제발전과 이에 대응한 교통인구의 증가로 운송시스템의 속도 경쟁은 날로 심화되고 있다. 그러나, 기존의 차륜구동 시스템은 본질적으로 궤도와 차륜의 마찰에 의하여 추진력을 얻기 때문에 평균 최대속도 250Km/h(상한 최대속도 350Km/h)수준이며 소음, 진동 등의 많은 문제점이 있다. 이러한 단점을 극복하기 위하여 선진 외국에서는 부상식 열차의 개발에 관심을 표명하여 1960년대 후반부터 열차와 공기부상식 열차에 대한 연구를 병행하였다. 1970년대 중반까지 프랑스, 영국, 미국 등에서 개발이 진행된 공기 부상식 열차는 고속 주행 및 환경 문제 등에 문제점이 많아 실용화에는 이루지 못하고 신교통 시스템에 부분적으로 적용되고 있는 실정이다. 그러나 자기부상 열차는 Power Electronics 및 자기관련 기술의 급속한 발전에 힘입어 현재 실용화 단계에 이르고 있다. 특히 자기부상(Magnetic Levitation : Maglev) 시스템은 레일과의 마찰력에 의해 추진하는 방식이 아니기 때문에 본질적으로 고속성, 무공해, 안정성, 신뢰성, 경제성 그리고 승차감이 뛰어나다. Maglev는 레일 표면에서 자력을 이용해서 약 1.0cm 또는 10cm 가량 부상한 상태에서 주행하기 때문에 외부와의 물리적인 접촉이 필요 없어 마찰에 의한 소음, 공해, 마모 등이 없는 대단히 이상적인 미래의 운송 수단으로 각광을 받고 있다.

• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.77-87
• /
• 1994

Vibrational analysis of slab tracks for HSR(High Speed Rail) is performed in order to find dynamic characteristics and to control noise and vibration for the tracks. Wheel-rail interactive force is included in the analysis by modelling the vehicle and track as an unsprung mass and elastically-supported-double-beam respectively, and both are assumed to be connected by the Hertzian spring. From this study, it has been found that vibration in the track and the force transmitted to the infrastructure could be reduced by controlling elasticity, mass and stiffness of the track supporting system appropriately.