• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.76-81
• /
• 2009

The fatalities of pedestrian account for about 21.2% of all fatalities at 2007 year in Korea. To reconstruct exactly the accident, it is important to calculate the throw distance of pedestrian in car to pedestrian accident. The frontal shape of SUV vehicle is dissimilar to passenger car and bus, so the trajectory and throw distance of pedestrian by SUV vehicle is not the same of passenger car and bus. The influencing on it can be classified into the factors of vehicle and pedestrian, and road factor. It was analyzed by PC-CRASH for simulation, and SPSS s/w was used for regression analysis. From the simulation results, the maximum impact energy of multi-body of pedestrian was occurred to that of torso body at the same time. And the throw distance increased with the increasing of impact velocity, and decreased with the increasing of impact offset. Also it decreased with the increasing of velocity of pedestrian at accident, and the throw distance of wet road was longer than that of dry road. Finally, the regression analysis model of SUV(Nissan Pathfinder type)vehicle in car to pedestrian accident was as follows; $$disti_i=-0.87-0.11offseti_i+0.69speed_i-4.27height_i+0.004walk_i+0.63wet_i+{\epsilon}_i$$.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.35-43
• /
• 2012

The Government is implementing the safety measures for pedestrian in living zone to decrease the traffic accident casualties in half. It is urgently to study the guideline because it contains to make the guideline of a median strip in City to prevent the violation of central line and jaywalking on the main contents. So, this study analyzed the pedestrian accidents and the violation of central line, and studied the type of a median strip, the installation guideline through studying the minimum crossing. Consequently, this study found out that a median strip which revised the attention inducement stick to decrease jaywalking could not have the strong prevention function of a crash barrier, so if it happens separation after the collision between vehicles, it induced the secondary accidents, and could take negative effects on traffic safety. In consideration of driving safety, this study analyzed that if it installs a median stirp, it has to ensure one meter, and such a thing could prevent the separation of lane or damage of facilities. However, if it is hard to ensure the space because of narrow road width, it could install a median strip in case of installing the road surface mark 0.5m. And the installation of the attention inducement stick or a median strip on the central line could be possible to induce the violation of central line, thus it is desirable not to install only anythings but also raised pavement markers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.52-56
• /
• 2012

Recently, the pedestrian protection regulations of Europe and Japan are becoming more stringent. However, it is difficult to evaluate the performance of protection because each regulation has different test conditions such as dummy, impact speed and so on. In this study, we construct a finite element model of pedestrian lower legform impactor prescribed in EEVC (European Experimental Vehicle Committee) W/G 10, and performed a impact analysis between the impactor and the front end module of vehicle. The simulations are carried out by using LS-DYNA3D, which is a well-known nonlinear dynamic simulation software. The analysis results according to various impact location show the impact characteristics of the lower legform.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2016.11a
• /
• pp.263-264
• /
• 2016

본 연구는 첨두 비첨두시간에 발생되는 교통사고의 주요 요인들을 발견하고 비교하여 각 시간대의 사고특성을 제시하고자 한다. 이에 로지스틱 회귀분석을 통해 분석한 결과 흐린 날씨의 경우 첨두시간에 발생되는 사망사고 위험도가 비첨두시간의 경우보다 더 높게 나타났고, 비첨두시간 사망사고 위험도의 경우 안개가 낀 날 증가하고 맑은 날 감소하는 모습이 나타났다. 과속의 경우 비첨두시간이 첨두시간의 경우 보다 크게 나타났고, 횡단 중인 보행자와 발생되는 사고에 대해서는 첨두시간의 사망위험도가 상대적으로 높은 것으로 나타났다. 차량단독 사고의 경우 공작물과 충돌로 인한 사망위험도는 첨두시간이 높은 것으로 나타났고, 도로 이탈로 인한 사망위험도는 비첨두시간이 높은 것으로 나타났다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.240-257
• /
• 2022

Autonomous vehicles use various local sensors such as camera, radar, and lidar to perceive the surrounding environment. However, it is difficult to predict the movement of vulnerable road users using only local sensors that are subject to limits in cognitive range. This is true especially when these users are blocked from view by obstacles. Hence, this paper developed an algorithm for collision avoidance with VRU using V2X information. The main purpose of this collision avoidance system is to overcome the limitations of the local sensors. The algorithm first evaluates the risk of collision, based on the current driving condition and the V2X information of the VRU. Subsequently, the algorithm takes one of four evasive actions; steering, braking, steering after braking, and braking after steering. A simulation was performed under various conditions. The results of the simulation confirmed that the algorithm could significantly improve the performance of the collision avoidance system while securing vehicle stability during evasive maneuvers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.577-586
• /
• 2018

In this study, traffic safety technology was developed for rural areas by reviewingthe relevant literature and data from the Traffic Accident Analysis System for the Chungcheong region.The goal is to reduce traffic accidents in small regional cities and rural areas in Korea. A road shoulder recognition light was developed to fit the pedestrian characteristics of the people using transportation in rural areas. It also minimizes damage to crops due to light pollution from traffic lights and street lights, and it supplements problems of damage from collision with vehicles and agricultural machines. The efficiency of the technology developed in this study was verified by comparing and analyzing the number of traffic accidents and the saved cost before and after its installation. A test bedwas established based on rural areas and is being evaluated for its applicability and effectiveness. It is expected that the reliability of such facilities could be improved through continuous studies, data collection, and analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1088-1095
• /
• 2019

The information and communication technology that is being developed recently has been greatly influencing the automobile market. In recent years, devices equipped with IT technology have been installed for the safety and convenience of the driver. However, it has the advantage of increased convenience as well as the disadvantage of increasing traffic accidents due to driver's distraction. In order to prevent such accidents, it is necessary to develop safety systems of various types and ways. In this paper implements a platform that can recognize LDWS and FCWS and PDWS by using a single camera without using radar sensor and camera fusion and stereo camera method using two or more sensors, and proposes to study multi-function driving safety platform using a single camera by analyzing recognition rate evaluation and validity on a vehicle.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.105-111
• /
• 2007

The type of pedestrian accident can be characterized by vehicular frontal shape and the height of pedestrian. The trajectory of pedestrian after collision by passenger car is different from that by bus due to vehicular frontal shape. The frontal shape of SUV vehicles is dissimilar to passenger car and bus. So, the trajectory and throw distance of pedestrian by SUV vehicles is not the same of passenger car and bus. In this paper, a series of pedestrian kinetic simulation were conducted to inspect the difference in throw distance between SUV vehicle and passenger car and bus by PC-CRASH that is the program for kinetic analysis of articulated body. From the results, if the height of pedestrian is taller than 1.70m, there is no difference in throw distance between SUV vehicle and passenger car, but if the height of pedestrian is about 1.55m throw distance of SUV vehicle is about 4m longer than that of passenger car at each impact speed. The throw distance of pedestrian by Bus is shorter than that of passenger car and SUV at each impact speed.

• Spatial Information Research
• /
• v.21 no.3
• /
• pp.11-19
• /
• 2013

Compared with traditional video monitoring systems that provide a video-recording function as a main service, an intelligent video monitoring system is capable of extracting/tracking objects and detecting events such as car accidents, traffic congestion, pedestrian detection, and so on. Thus, the object tracking is an essential function for various intelligent video monitoring and surveillance systems. In this paper, we propose a background and local histogram-based object tracking approach for intelligent video monitoring systems. For robust object tracking in a live situation, the result of optical flow and local histogram verification are combined with the result of background subtraction. In the proposed approach, local histogram verification allows the system to track target objects more reliably when the local histogram of LK position is not similar to the previous histogram. Experimental results are provided to show the proposed tracking algorithm is robust in object occlusion and scale change situation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.505-512
• /
• 2019

This study is a basic study to prepare safety measures for the tram that is being introduced into Korea by reviewing accident analysis and accident compensation system of the tram. Analysis of accident characteristics of the tram was analyzed based on overseas data. Five years after the inauguration of the tram, accidents were halved and stabilized. Deaths accounted for 0.5 % of all casualties, most accidents were minor. Accidents with other mean transportation were high 84.1 %, among them accidents with passenger cars was found to be highest. The frequent points of accidents were analyzed as intersections and tram stop, and measures for pedestrian accidents were found to be important. Those are proposed safety measures through analyzing tram accident characteristics: Monitoring accidents which occur within five years of its inauguration, developing accident database input system, installation of fences for preventing people from jaywalking, operating traffic signal for preventing people from jaywalking through connection of pedestrian signals and tram signals, clamping down on illegal U-turn cars and jaywalking pedestrian, Also, those are proposed accident treatment measures based on general driver receptively and overseas data: property damage liability coverage (PI) of car insurance, comparative negligence when the accident occurs between car and tram.