• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.66-72
• /
• 2019

To improve ride quality and running stability of high speed train(HST), it is important that connection between coaches adopts the articulated bogies by using a gangway ring, unlike the conventional independent bogies assembled with car bodies. Although the gangway ring should be ensured absolute safety against passenger movement between coaches during train operation, there is still a lack of quantitative durability criteria of that. Therefore, in order to improve the passenger safety of HST, it is important to study the test requirements on durability evaluation for the ring. In this study, seven mixed loading cases were derived from the triaxial loading(vertical/lateral/longitudinal) modes. The safety factor of each component is at least 2.4 or more from the results of the finite element analysis. In addition, fatigue safety was evaluated through durability analysis from the viewpoint of strain-life design. Durability tests for the gangway ring carried out a total of 10 million cycles in 4 phases load conditions. After the durability test, the defect of each component was investigated using nondestructive testing techniques.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.3
• /
• pp.51-60
• /
• 2001

The travel behavior can be analysed microscopically using GPS because the travel characteristics can be found out by travelling two test cars loaded with GPS equipments. The speed difference and spacing variation between the lead vehicle and the following's in uninterrupted flow are the important variables related to capacity and safety. This study analysed these with data obtained by travelling the 4th Line and 28th Line of the national road. The variation width in speed difference in the run time is below 3.0%. But, related to the speed difference in the situation of acceleration and deceleration the difference after 4second is bigger than that just after the start. The spacing variation is similar to this. The spacing just before deceleration concerning safety was analysed. When the theoretical values by the modeling method and observed values were compared, the observed values were analysed 12.52% shorter than the other in average.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.854-855
• /
• 2023

안전벨트 미착용 혹은 통학 차량 미하차로 인한 사고를 방지하기 위해 좌석에 압력 센서와 안전벨트에 센서를 부착하여 착석하지 않은 상태, 안전 벨트 미착용, 안전 벨트 착용으로 3단계로 나누어 탑승자의 상태 정보를 운전석에 위치한 디스플레이에 정보를 표시하여 안전 사고가 발생할 가능성을 줄이고자 한다.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.139-146
• /
• 2011

Travelling vehicles on roads may slip or overturn due to strong cross wind. This paper presents the path deviation equation and the overturning equation of vehicle, and the process of evaluating the cross wind risk. Case studies for cars and trucks are carried out. It explains the mechanism why the deviation occurs according to the types of vehicles. It shall help to prepare the measures for reducing the risk of travelling vehicles in high wind speeds.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.557-564
• /
• 2009

This study compared KORAIL's procurement tasks with that of other companies. after analyzing the institutional and operational problems in procurement tasks especially in the respect of rolling stock and components which are KORAIL's major purchasing items, this study presented the way of purchasing cost Reduction through improving and streamlining procurement tasks.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.950-953
• /
• 2012

클라우드 컴퓨팅은 공유된 컴퓨팅 자원을 사용자의 요구에 따라 원하는 만큼 네트워크를 통해 사용하는 IT기술이다. 최근 이러한 클라우드 컴퓨팅의 개념을 차량 Ad-hoc 네트워크에 도입한 차량 클라우드 서비스에 대한 연구가 시도되어지고 있다. 차량 클라우드에서도 기존의 클라우드 서비스나 차량 Ad-hoc 네트워크에서와 같이 서비스 모델에 따른 보안기술이 적용되어야하지만, 차량 클라우드 서비스를 위한 보안기술의 연구는 국내 외적으로 미비한 실정이다. 따라서 본 논문에서는 차량 클라우드에서 가능한 서비스 모델을 제시하고 이에 따른 보안위협 및 안전한 차량 클라우드 서비스를 구축하기 위한 보안 요구사항에 대하여 기술한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4A
• /
• pp.197-206
• /
• 2012

It is found the first case of broad interpretation of the crash analysis in MASH (Manual for Assessing Safety Hardware, AASHTO, 2009) which is the guideline of roadside safety features in United States. They introduced the procedure of calculating 1,500 kg sedan safety index from the 2,270 kg pick-up truck crash test for crash cushion. First, following MASH's method, calculate 0.9 ton vehicle crash data and safety index using 1.3 ton vehicle crash test data and compare with actual 0.9 ton vehicle crash test data. results show that actual test data and the data calculated by MASH's method have great difference. Second, analyse the cause and develop new method. Proposed method can estimate not only the lighter vehicle (0.9 ton) crash data from the heavier vehicle (1.3 ton) crash test but also heavier vehicle (1.3 ton) data from lighter vehicle (0.9 ton) test. This method is superior to MASH's method and has stronger theoretical foundation. This paper proves the efficiency and the accuracy of new broad interpretation method using crash test data and investigates the principle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7292-7301
• /
• 2014

With the development of IT Info-Communications technology, the vehicle with a combination of wireless-communication technology has resulted in significant research into the convergence of the component of existing traffic with information, electronics and communication technology. Intelligent Vehicle Communication is a Machine-to-Machine (M2M) concept of the Vehicle-to-Vehicle. The Vehicle-to-Infrastructure communication consists of safety and the ease of transportation. Security technologies must precede the effective Intelligent Vehicle Communication Structure, unlike the existing internet environment, where high-speed vehicle communication is with the security threats of a wireless communication environment and can receive unusual vehicle messages. In this paper, the Vehicle Identification number between the V2I and the secure message communication protocol was proposed using hash functions and a time stamp, and the validity of the vehicle was assessed. The proposed system was the performance evaluation section compared to the conventional technique at a rate VPKI aspect showed an approximate 44% reduction. The safety, including authentication, confidentiality, and privacy threats, were analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1087-1096
• /
• 2011

Vehicular Ad Hoc Network(VANET) using wireless network is offering the communications between vehicle and vehicle(V2V) or vehicle and infrastructure(V2I). VANET is being actively researched from industry field and university because of the rapid developments of the industry and vehicular automation. Information, collected from VANET, of velocity, acceleration, condition of road and environments provides various services related with safe drive to the drivers, so security over network is the inevitable factor. For the secure message authentication, a number of authentication proposals have been proposed. Among of them, a scheme, proposed by Jung, applying database search algorithm, Bloom filter, to RAISE scheme, is efficient authentication algorithm in a dense space. However, k-anonymity used for obtaining the accurate vehicular identification in the paper has a weak point. Whenever requesting the righteous identification, all hash value of messages are calculated. For this reason, as the number of car increases, a amount of hash operation increases exponentially. Moreover the paper does not provide a complete key exchange algorithm while the hand-over operation. In this paper, we use a Received Signal Strength Indicator(RSSI) based velocity and distance estimation algorithm to localize the identification and provide the secure and efficient algorithm in which the problem of hand-over algorithm is corrected.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.4
• /
• pp.41-52
• /
• 2010

Message authentication is an essential security element in vehicular ad-hoc network(VANET). For a secure message authentication, integrity, availability, privacy preserving skill, and also efficiency in various environment should be provided. RAISE scheme has been proposed to provide efficient message authentication in the environment crowded with lots of vehicles and generally considered to be hard to provide efficiency. However, as the number of vehicles communicating in the area increases, the overhead is also incurred in proportion to the number of vehicles so that it still needs to be reduced, and the scheme is vulnerable to some attacks. In this paper, to make up for the vulnerabilities in dense vehicular communication network, we propose a more secure and efficient scheme using a process that RSU(Road Side Unit) transmits the messages of neighbor vehicles at once with Bloom Filter, and timestamp to protect against replay attack. Moreover, by adding a handover function to the scheme, we simplify the authentication process as omitting the unnecessary key-exchange process when a vehicle moves to other area. And we confirm the safety and efficiency of the scheme by simulating the false positive probability and calculating the traffic.