• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.3
• /
• pp.84-94
• /
• 2019

This paper developed the VSL control algorithms for various traffic conditions in tunnels. Various algorithms determining control speed, buffer speed, and display time were suggested in order to apply three gantry locations. The algorithms were evaluated by constructing simulation environments using python and VISSIM Com-Interface. Results show that speed difference between congested flow and normal flow was 50 km/h without algorithm application, but the difference was reduced to 20 km/h with algorithm application. In addition, the length of congested region in the exit section of the tunnel was also reduced from 800m to 300m with algorithm application. It is expected that the traffic accidents in tunnels may be reduced since the average and standard deviation of the speed are greatly reduced after applying the algorithms suggested.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.2
• /
• pp.6-10
• /
• 2019

This paper describes effectiveness of accident reduction on vehicles equipped with AEB using accident data occurring in Korea. During the statistical period, we used the number of vehicles which are covered by auto insurance and the number of accidents. To maximize the reduction effect of accidents caused by the driver's carelessness, the analysis was limited to Physical Damage Coverage that covers the cost of repairing or replacing the damaged vehicle caused by the driver's fault. Due to Personal Information Protection Law, it was not capable of comparing the same vehicle using Vehicle Identification Number in this study. Instead of that, we used it as a similar vehicle, so there are limits to the comparison and analysis results. As a result of this study, we have found that the effect of reducing accidents was different depending on the vehicle class, but it was generally concluded that the number of accidents decreased when the vehicle was equipped with an AEB system. Domestic research on the AEB effect of reducing accidents is not active yet. Therefore, it is absolutely essential to analyze the effects according to various conditions such as driver's age, occupation and gender as well as expanding the study models in the future.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.351-357
• /
• 2019

A number of case studies and type analyzes have been conducted on mobility platform services that are rapidly evolving around the world. However, since the actual user experience is important for the development of the mobility service, research on the user side is needed. In the mobility platform service, only the car-hailing was used, and the preference factors were analyzed through the questionnaire in seven aspects of the user experience. Studies have shown significant differences according to gender. While the safety of the woman, the comfort and the kindness of the vehicle have a great influence on the satisfaction, the male affirms that the familiarity is the factor affecting the satisfaction. This study focused on the customer experience as a real user and identified key factors of selecting mobility platform service, so it is expected that it will contribute to the development of mobility platform service in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.290-296
• /
• 2019

Head-up displays for vehicles play an important role in displaying various information about the safety and convenience of driving on the windshield of the vehicle. In this study, ultra-precision machining was performed and evaluated as a method for machining a large-area aspheric free-form mirror that is applicable to augmented reality technology. Precision diamond cutting is highly accurate and suitable for the production of advanced parts with excellent surface integrity, low surface roughness, and low residual stress. By using an aspheric free-form mold, it is possible to improve the optical transfer function, reduce the distortion path, and realize a special image field curvature. To make such a mold, the diamond cutting method was used, and the result was evaluated using an aspherical shape-measuring machine. As a result, it was possible to the mold with shape accuracy (PV) below $1{\mu}m$ and surface roughness (Ra) below $0.02{\mu}m$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.224-239
• /
• 2018

Autonomous vehicles can significantly reduce accidents due to 'driver's carelessness', which occupies the majority of causes for traffic accidents, but they may fail to avoid traffic accidents due to unexpected situations, such as "trolley dilemma", vehicle defects and road defects. Therefore in situations Autonomous vehicles need to be made ethical choices. This study assumes that Autonomous vehicles can not avoid traffic accidents due to unexpected sink holes. In this situation, the traffic accident costs was analyzed for the ethical choices of Autonomous vehicles. In the process, Autonomous vehicles were made to choose one of three ethical choices : (1) Egoism with priority on passenger safety, (2) Deontology for minimizing human damages, (3) Utilitarianism with minimizing traffic accident costs. As a result of the analysis, egoism had the highest traffic accident costs, and deontology for minimizing human damages had the lowest traffic accident costs.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.535-544
• /
• 2018

Autonomous driving can be limited by only using sensors if the sensor is blocked by sudden changes in surrounding environments or large features such as heavy vehicles. In order to overcome the limitations, the precise road-map has been used additionally. This study was conducted to segment and classify road objects using 3D point cloud data acquired by terrestrial mobile mapping system provided by National Geographic Information Institute. For this study, the original 3D point cloud data were pre-processed and a filtering technique was selected to separate the ground and non-ground points. In addition, the road objects corresponding to the lanes, the street lights, the safety fences were initially segmented, and then the objects were classified using the support vector machine which is a kind of machine learning. For the training data for supervised classification, only the geometric elements and the height information using the eigenvalues extracted from the road objects were used. The overall accuracy of the classification results was 87% and the kappa coefficient was 0.795. It is expected that classification accuracy will be increased if various classification items are added not only geometric elements for classifying road objects in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.781-789
• /
• 2021

In this paper, we quantitatively analyzed the required UAV(Unmanned Aerial Vehicle) failure rate of small UAV (≤25kg) based on the harm to human caused by UAV crash to fly over the populated area. We compute the number of harm to human when UAV falls to the ground at certain descent point by using population density, car traffic, building to land ratio, number of floors of building data of urban area and UAV descent trajectory modeling. Based on this, the maximum allowable UAV failure rate is calculated to satisfy the Target Level of Safety(TLS) for each UAV descent point. Then we can generate the failure rate requirement in the form of map. Finally, we divide UAV failure rate into few categories and analyze the possible flight area for each failure rate categories. Considering the Youngwol area, it is analyzed that the UAV failure rate of at least 10^-4 (failure/flight hour) is required to access the residential area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.1
• /
• pp.160-173
• /
• 2021

Recently, research on the development of autonomous vehicles has increased worldwide. Moreover, a means to identify and analyze the characteristics of traffic accidents of autonomous vehicles is needed. Accordingly, traffic accident data of autonomous vehicles are being collected in California, USA. This research examined the characteristics of traffic accidents of autonomous vehicles. Primarily, traffic accident data for autonomous vehicles were analyzed, and the text data used text-embedding techniques to derive major keywords and four topics. The methodology of this study is expected to be used in the analysis of traffic accidents in autonomous vehicles.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.168-172
• /
• 2018

HACCP is scientific Sanitary control system to ensure food safety with autonomous, systematic and effective way by analysing hazard element that can be occurred in each steps until an end consumer takes food including raw material status, manufacturing, processing, storing, distributing, cooking and specifying the critical control point. In this paper, the temperature and humidity are measured during the transport of food, the stage of its distribution, to ensure systematic and effective management of HACCP, and we designed a monitoring terminal that uses this information to send it to servers periodically and a firmware that implements it. We have confirmed that the data transmitted by the terminal, including the information measured in sub-net, was well stored on the server and the response from the server is well received by the terminal. It is expected to be used for the management of food history, data tracking and statistical data in the future. This system is also considered to be an applicable system for group cafeteria such as schools or workplaces and logistics warehouses for raw materials or food storage and so on.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.521-526
• /
• 2020

In this paper, we propose a design method and process for hybrid V2X communication platform that combines WAVE communication and LTE-V2X communication which are C-ITS communication protocols for vehicle environments and Legacy LTE communication which is a commercial mobile communication for evaluating the autonomous platooning platform of commercial vehicles. For a safe and efficient autonomous platooning platform, an low-latency communication function based on C-ITS communication is required, and to control it, commercial communication functions such as Legacy LTE, which can be connected at all times, are required. In order to evaluate such a system, the evaluation equipment must have the same level of communication performance or higher. The main design contents presented in this paper will be applied to the implementation of hybrid V2X terminals for functional evaluation.