• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.29-38
• /
• 2007

This study investigated the effects of delineation systems on drivers' maneuver and how the effectiveness of delineation system can be further improved according to the road geometry. The experiments were conducted to collect lateral placement data and detection distance data using GPS equipped vehicles. The main results are summarizedas follows. Firstly, installing the delineation facilities on the roads helps drivers to recognize road alignment. Secondly, the detection distance is longer for delineators than for raised pavement marker in tangent section, while there is no difference in curve section. The chevron show the longest detection distance in the curve section, while the raised pavement markers showed no distinctive performance in terms of detection distance and lateral placement. Therefore, we can recommend install delineators in the tangent sections and chevrons in curve sections, based on the analysis results of effects of delineation facilities.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.65-74
• /
• 2007

There have been research and studies on rumble strip effectiveness in terms of accident reduction since rumble strips were first installed in 1950's. Research has shown that rumble strips reduce accidents from drowsy and inattentive driving. The present research statistically analyze the accident reduction effect of rumble strips based on accident reports obtained from rumble strip installed 377 places of nation wide freeway lines. Based on the results, rumble strips are effective in reducing accident frequencies 32.3%. The probable various factors inducing accidents are identified. These include drowsiness, speeding, inattentiveness, vehicle defectiveness, and short headways. It was found that rumble strips are effective in reducing A, B, C leveled accidents, and in reducing clear, cloudy, and rainy weather accidents. The results may make clear and expand probable types of accidents that rumble strips would reduce, then reduce the total accidents on freeway lines.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.103-111
• /
• 2003

This study proposes methodology deterimining a basic pedestrian crossing capacity that plays a critical role in the installation of pedestrian signal at the crosswalks. The methodology is based on the pattern of vehicle arrived at the crosswalks. Erlang distribuion is used as headway distribution that can cover the various levels of flow rate. Models using Erlang distribution are represented by Erlang parameter (K) of 1, 2, or 3 at 2-, 4-, or 6-lane roadway in both directions. In addition, this study considered the only type of road with a pedestrian refuge area in the median that is used to wait for the allowable gap provided by the flow of another direction. As a result, the pedestrian capacity decreases as flow rate increases and Erlang parameter increases for the road with the pedestrian refuge. This study develops the models to determine the pedestrian capacity under a variety of flow rates and the outcomes of this study could be used as the criteria for the determination of the installation of pedestrian signal or for the provision of pedestrian refuge in the median of road.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.57-64
• /
• 2013

Recently, bicycle accidents have increased with the ever-increasing number of cyclists. Bicycle accidents occurred frequently in intersections, and the perpendicular collision between a right-turning car and a crossing bicycle was the most prevalent accident type. In particular, the collision was caused by motorists' carelessness. In other words, the accident-involved motorists did not pay sufficient attention to a bicycle crossing behind them. Another cause was a cyclist's higher speed than pedestrians. This paper evaluated the potential risk of the collision between right-turning cars and crossing bicycles based on simulation experiments, with motorists' speed and carelessness focused on. Consequently, it was found that to reduce the potential risk of the collisions a motorist should slow down and pay more attention to the rear sight by turning his/her head.

• Fire Science and Engineering
• /
• v.23 no.3
• /
• pp.79-84
• /
• 2009

The smoke control system plays the most important role in securing evacuation environment when a fire occurs in road tunnels. Smoke control methods in road tunnels are classified into two categories which are longitudinal ventilation system and transverse ventilation system. In this study it is intended to review the characteristics of smoke behavior by performing numerical analysis for calculating the optimal smoke exhaust air volume when a fire occurs in tunnels in which transverse ventilation is applied, and for obtaining the basic data required for the design of smoke exhaust systems by deriving optimal smoke exhaust operational conditions for various conditions. As a result of this study, when the critical velocity in the tunnel is 1.75m/s and 2.5m/s, the optimal smoke exhaust air volume has to be more than $173m^3/s$, $236m^3/s$ for the distance of the smoke moving which can limit the distance to 250m. In addition, in case of uniform exhaust the generated smoke is effectively taken away if the two exhaust holes near the fire region are opened at the same time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.235-244
• /
• 2016

Automotive symbols are more widely needed for new, convenient driving devices in automobiles. Good automotive symbols should be detectable, identifiable at first glance, easily learned, recognizable, and produce quick responses after practice. In this paper, a methodology for developing and evaluating automotive symbols is suggested. It includes multiple tests, such as comprehension, perceptual quality, appropriateness, and integrated evaluation. 28 symbols were tested and evaluated by the suggested methodology for convenient driving systems, such as a lane departure warning system (LDWS), cruise control (CCS), and a collision warning system (CWS). Most of the KS R ISO 2575 symbols had higher scores of comprehension, perceptual quality, and appropriateness, but the sunroof and camera symbols had lower scores. Standard symbols with several new functions should be developed. This methodology could be useful for developing and evaluating automotive symbols.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.4
• /
• pp.71-79
• /
• 2003

As a critical member of cable-stayed bridges, stay cables play on important role of supporting the entire structure. Traffic, wind or rain-wind induced vibrations of stay cables would be a major cause of degrading both safety and serviceability of the bridge. One of the effective alternatives to solve this problem is to employ the cable dampers. In order to design the cable damper optimally, it is necessary to exactly estimate the dynamic characteristics of the existing cables. To achieve more reliable dynamic properties of stay cables, precise excitations inducing forced vibration are needed. Therefore, in this study, a cable excitation system(exciter) controlled digitally was developed. And to evaluate the performance of the cable exciter developed, a solution of the differential equation of cable motion considering the exciter was derived, Using the cable exciter, sine sweeping and resonance tests on a cable model were carried out to obtain the dynamic characteristics effectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.13-24
• /
• 2008

Real-time traffic data are readily obtainable by traffic surveillance systems of intelligent transportation systems (ITS). Such data greatly support further applications in the field of traffic operations, planning, and safety. However, traffic data should be appropriately processed to fully exploit the benefits of data collection capability. Rather than developing individual data processing techniques, which is major concern of existing studies, this study proposes a novel methodology for evaluating data processing techniques in an integrated manner. Also, a tool for implementing the proposed methodology is developed. Users can extract useful and more reliable traffic data based upon their ultimate purpose of data usage by the evaluation tool developed in this study. Actual freeway traffic data are, as an example, fed into the evaluation tool, and results are discussed.

• Journal of the Korean Society for Railway
• /
• v.11 no.5
• /
• pp.489-498
• /
• 2008

In general, deflection limit criteria of bridge design specifications have been considered based on static serviceability and structural stability. Dynamic serviceability induced from bridge vibration actually has not been included in the criteria. Thus, it is necessary for deflection limit to be considered in order to check dynamic service- ability on bridge vibration. In this study, The allowable displacement of Korea Railway Bridge Design Specifications is compared to the frequency domain comfort limit and analyzed france code and japanese code. Korea Railway Bridge Design Specifications is regulated based on the train speed. Such is because the vibration time duration is partly considered. but this criteria is not satisfied with comfort limit. and, it is estimated to be capable to provide deflection limit considering dynamic serviceability. In order to evaluate the dynamic serviceability of various types of railway bridges in current public were selected and their dynamic signals were measured. and the result of the bridge-train interaction analysis according to the changes in bridge stiffness was compared to the comfort limit to suggest the stiff-ness limit to the dynamic serviceability, which should conveniently be applied at the field.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.15-22
• /
• 2011

In this research, static load test is performed to verify the arch effect and structural performance of CFTA(Concrete-Filled and Tied steel tubular Arch) girder, and FE(Finite Element) analysis is performed to investigate validity of the test result. CFTA girder is designed to maximize the benefit of each material, such as steel plate, filled concrete and PS tendon. Static load test is performed based on the frame-analysis result of 12m sample miniature model. The result of static load test is that structural performance and safety of CFTA girder are confirmed and there is different deflection mode with other structural form result from arch effect. FE analysis with ABAQUS is also performed to show the validity of the truck collision safety and static load test.