• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.579-584
• /
• 2017

The damper oil seal of a high-speed railway vehicle is made from nitrile butadiene rubber (NBR) in order to prevent lubricant from leaking into the damper and to stop harmful contaminants from entering the external environment while in service. Oil leakage through the seal primarily occurs from fatigue failure of the damper. Cumulative damage of the seal occurs due to the contact force between the rod and the rubber during movement due to track irregularities and cants, among other factors. Thus, the design of the oil seal should minimize the maximum principal strain at weak points. In this study, the optimal cross section of the damper oil seal was found using the multi-island genetic algorithm method to improve the durability of the damper. The optimal shape of the oil seal was derived using process automation and design optimization software. Nonlinear material properties for finite element analysis (FEA) of the rubber were determined by Marlow's model. The nonlinear FEA confirmed that the maximum principal strain at the oil leakage point was decreased 24% between the initial design and the optimum design.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.58-70
• /
• 2020

Detour behavior on the expressway means that the driver uses the local road by passing the part of the expressway which is stagnant at the time of the traffic demand such as holidays. Since the detour rate was estimated through the survey at toll gate in the past, there was a difficulty in estimating the actual detour rate due to the small sample of the survey. In this study, we use DSRC-based route travel data to conduct empirical studies on detour patterns such as the estimation of actual detour rate, the improvement of travel time using detour road, and the correlation between traffic conditions on the expressway and detour rate. On the day of Chuseok and the day before Chuseok, the analysis of Giheung-DongtanIC→OsanIC and Seopyeongtaek IC→Walgott JC showed that the use of detour roads increased gradually during the congestion of the main line and travel time reduced when using detour roads, However, when the traffic congestion of the main line is not severe, the travel time increases when using the detour roads. The correlation between the traffic condition of the expressway and the actual detour rate has a negative correlation, which is consistent with the congestion pattern of the main line. The results of this study can be used to overcome limitations of detour pattern research based on surveys in the past and to establish a detour strategy for expressway sections where traffic demand is concentrated.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.54-59
• /
• 2022

This paper is a purpose to study and analyze the failure examples for timing belt, camshaft position sensor and ignition coil of LPG automotive engine. The first example, whe the service man install the front case bracket of engine, he excessively tightened up a 12mm bolt for being fixed of brackct. As a results, the bolt was separated from joint part so that it was put in between the crankshaft sprocket. Therefore the belt was broken off because of interference between timing belt and sprocket tooth. The second example, it verified the disharmony phenenomen of engine that the gap of the camshaft position sensor and camshaft senseing point assembled on cylinder head part was small more than iregular value so that the it was generated senseing damage phenomenon by pulse signal misconduct. The third example, it was found the engine disharmony phenomenon that the fire in the ignition coil was leaked by inner damage of Number 2 ignition coil.Therefore, the the manager of a car throughtly have to inspect not in order to arise the failure symptoms.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.245-253
• /
• 2009

Road facility is the most fundamental infrastructure for traffic and various information for smooth traffic is included in road surfaces. Various information included in road surfaces should be often removed and reinstalled by partial damage and aging. In addition, the existing road surface information should be removed in order to mark new information as traffic information changes. The existing road surface removal method suing grinders and torches had problems such as dangerous working equipment and workers' direct exposure to cars. In addition, although water-jet system using super high-pressure water was used to remove road surface in order of improvement of traditional method, there are another problems such as limitations according to water-tanks and water frost on the road surfaces after work. Therefore, this study analyzes and suggests systems to develop prototype after analyzing dry ice blaster in order to improve the current road surface removal methods. In addition, the study analyzes the possibility of introduction of dry ice blaster through a test for proposing an automatized equipment for new road surface mark removal considering environment and work efficiency, and compare traditional method with introduced dry ice blaster for operating cost.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.75-89
• /
• 2006

This paper presents a practical and realistic Life-Cycle Cost (LCC) optimum design methodology of steel bridges considering time effect of bridge reliability under environmental stressors such as corrosion and heavy truck traffics. The LCC functions considered in the LCC optimization consist of initial cost, expected life-cycle maintenance cost and expected life-cycle rehabilitation costs including repair/replacement costs, loss of contents or fatality and injury losses, road user costs, and indirect socio-economic losses. For the assessment of the life-cycle rehabilitation costs, the annual probability of failure which depends upon the prior and updated load and resistance histories should be accounted for. For the purpose, Nowak live load model and a modified corrosion propagation model considering corrosion initiation, corrosion rate, and repainting effect are adopted in this study. The proposed methodology is applied to the LCC optimum design problem of an actual steel box girder bridge with 3 continuous spans (40 m+50 m+40 m=130 m), and various sensitivity analyses of types of steel, local corrosion environments, average daily traffic volume, and discount rates are performed to investigate the effects of various design parameters and conditions on the LCC-effectiveness. From the numerical investigation, it has been observed that local corrosion environments and the number of truck traffics significantly influence the LCC-effective optimum design of steel bridges, and thus realized that these conditions should be considered as crucial parameters for the optimum LCC-effective design.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.119-126
• /
• 2017

As container vessels get larger, container terminals are also likely to grow. The problem that arises is that the growing volume should be handled in the same amount of time as before. Container terminals are introducing an automation system in order to overcome the limitations of existing manual methods and to continuously reduce operating expenses. Because, Manual handling of carrying containers gate in and out of terminals causes inaccurate data, which results in confusion. An alternative is for containers to be labeled with barcodes that can be scanned into a system with a scanner, but this takes quite a long time and is inconvenient. A RFID system, also known as a gate automation system, can solve these problems by reducing the time of gate management with a technology that detects number identification plates, helping operators more efficiently perform gate management work. Having said that, with this system, when container damage is detected, gate operators make and keep documents manually. These documents, which are insufficient evidence in proving container damage, result in customer claims. In addition, it is difficult for gate operators and other workers to manage containers, exposing them to danger and accidents. This study suggests that if an automation system is introduced at gates, containers can be managed by a video storage system in order to better document damage The video system maintains information on container damage, allowing operators the ability to search for videos they need upon customer request, also allowing them to be better prepared for customer claims. In addition, this system reduces necessary personnel and risk of accidents near gates by integrating a wide range of work.

• Clean Technology
• /
• v.17 no.2
• /
• pp.85-96
• /
• 2011

Self-healing materials are a class of smart materials that have the structurally incorporated ability to repair damage caused by mechanical usage over time. A material (polymers, ceramics, metals, etc.) that can intrinsically correct damage caused by normal usage could lower production costs of a number of different industrial processes through longer part lifetime, reduction of inefficiency over time caused by degradation, as well as prevent costs incurred by material failure. The recent announcement from Nissan on the commercial release of scratch healing paints for use on car bodies has gained public interest on such a wonderful property of materials. This article is a second part of healing materials dealing with inorganic engineering materials such as metals, ceramics, and concrete. The healing mechanisms developed for the inorganic materials are to be discussed with the future prospect.

• Journal of the Korea Concrete Institute
• /
• v.25 no.1
• /
• pp.11-18
• /
• 2013

Cement concrete pavement offers long-term service life and excellent applicability for heavy traffic. It is easier to purchase and more durable and economical than the asphalt pavement. However, it is difficult to repair and rehabilitate compared to the asphalt pavement when it comes to the maintenance problem. Since the crack is the main reason of the damage of concrete pavement, it is necessary to control the early and long-term crack in the concrete pavement. In this experimental study, the basic performance tests have been carried out to investigate the effect of hybrid fibers which were composed of micro fibers with small diameter and high aspect ratio and macro fibers with large diameter and low aspect ratio on the concrete pavement, in which lower water ratio and larger aggregates were used compared to the general concrete mixture. The test results showed that the flexural strength and toughness of concrete pavement mixture have been increased with the use of hybrid fibers in the concrete pavement mixture, even though they were less effective compared to the normal concrete mixture. It was found that the hybrid fibers were effective to control the early shrinkage of the concrete pavement which is one of the main reasons of the damage in the concrete pavement.

• Science of Emotion and Sensibility
• /
• v.6 no.3
• /
• pp.1-11
• /
• 2003

The purpose of the present driving simulation study was to examine the effect of cellular-phone use on driving performance when required driving speeds were systematically varied(60, 80, 100, or 120km/h) while either using cellular-phones(experimental condition; Hands-Free or Hands-Held) or not(control condition). Driving performance was measured both by longitudinal vehicle control(i.e., variabilities in driving speed and headway) and lateral vehicle control(variabilities in lane position). The results can be summarized as followings: (1) The significant difference in driving speed variation between the two cellular-phone usage conditions was found only at relatively higher driving speed conditions(i.e., over 80km/h). (2) Only in the experimental condition where cellular-phone was required to be used while driving, the magnitudes of variation in driving speed, headway and lane position were gradually increased as the required driving speeds were increased(this tendency was not found in control condition). And. (3) the dependent measures of this study appeared to suggest that cellular-phone usage itself (rather than the types of cellular-phone) had significant impact on driving performance. Finally, implication and issues related to this study were discussed.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.1
• /
• pp.20-26
• /
• 2016

Sympathetic reaction to grotesque facial injuries with oral bleeding can trigger confusion and generate inefficiency among emergency room personnel. Regardless of the extent of the injury, or of the sympathy elicated, the victim must be evaluated and treated as a whole patient with multiple trauma. There must be no confusion as to order of importance in the steps of evaluation : 1. airway 2. hemorrhage 3. shock 4. associated injuries 5. local injury 6. triage of facial injuries. The most dangerous aspect of oral hemorrhage is the possibility of its obstructing the upper airway. Swallowing large amounts of blood will usually cause gastric irritation and lead to vomiting, thus further complicating the management of the patient. Once a clear airway is assured and hemorrhage have been controlled, consideration is given to possible associated injuries before undertaking treatment of the facial injuries themselves. Status of the cardiopulmonary, gastrointestinal and neuromuscular systems all have a bearing on decisions concerning facial injury treatment. In this light, treatment priority becomes exceeding important. On the other hand, the importance of facial injuries should never be minimized, especially in a mentally retarded patient with oral hemorrhage. This is a case report about oral hemorrhage control as treatment priority in a mentally retarded patient.