• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.492-498
• /
• 2021

This study examined how the emissions of pollutants affect the volume of traffic of freight vehicles in the transport sector. Multiple regression analysis was conducted considering several variables, including population by region, area of urban district, GDP, and the number of businesses by industry, e.g., agriculture, forestry, fishery, manufacturing, wholesale, and retail. These variables differ according to the characteristics of the freight vehicles (industry, by the ton). Therefore, it is essential to fully consider the volume of traffic of the specific freight vehicles by region before implementing relevant programs and policies, such as specific restrictions on the operation of vehicles. Some specific areas, in which logistic centers are located have heavy freight traffic, and these centers deserve extra consideration. Thus, in this study, different regional factors that affect the traffic of freight vehicles should be considered before determining the areas that will be subject to restrictions on the operation of these vehicles.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1851-1861
• /
• 2014

This study aims to calculate reliable sectional travel speeds with the consideration of the characteristics of the probe data collected in the interrupted traffic flow. First, in order to analysis the characteristics of the probe data, we looked into the distribution of the sectional travel times of each probe vehicle and compared the difference in the sectional travel speeds of each probe vehicle collected by DSRC. As a result, it is shown that outliers should be removed for the distribution of the sectional travel times. However, The comparison results show that the sectional travel speeds from the DSRC probe vehicles are not significantly different. Finally, based on the distribution characteristics of the sectional travel speeds of each probe vehicle and the representative values counted during a collection period, we drew the optimal outlier removal procedure and evaluated the estimation errors. The evaluation results showed that the DSRC sectional travel speeds were found to be similar to the observed values from actually running vehicles. On the contrary, in the case of the sectional travel speeds of intra-city bus, it was analyzed that they were less accurate than the DSRC sectional travel speeds. In the future, it will be necessary to improve BIS process and make use of the travel information on intra-city buses collected in real time to find various ways of applying it as traffic information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.23-35
• /
• 2017

Work zone traffic control is of keen interest because both traffic operations and safety performances are directly affected by traffic management methods. In particular, work zone traffic on two-lane roads needs to be managed in more efficient and safer manners due to its unique characteristics of alternative right-of-way assignment. This study developed a dynamic control algorithm that can be used for real-time operations of two-lane work zone traffic. The performance of the developed algorithm was evaluated by VISSIM microscopic traffic simulator. An applied programming interface (API) based program was developed to plug-in the control algorithm onto the simulator. The results demonstrated the feasibility of the proposed control algorithm for two-lane work zone.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.45-54
• /
• 2013

Korea Expressway Corporation has been utilizing vehicles equipped with dedicated short range communication (DSRC) based on-board equipment (OBE) for collecting path travel times. A path based method (PBM) estimates the path travel time using probe vehicles traveling whole links on the path, so it is not always possible to obtain sufficient samples for calculating path travel time in the DSRC system. Having this problem in utilizing DSRC for travel time information, this study attempted to estimate path travel time with the help of a link based method (LBM) and examined whether the LBM can be used for obtaining reliable path travel times. Some comparisons were made and identified that the MAPE difference between the LBM and the PBM estimates are less than 3%, signaling that LBM can be used as a proxy for PBM in case of sparse sample conditions. Some limitations and a future research agenda have also been proposed.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.2 s.39
• /
• pp.223-232
• /
• 1999

For the design and maintenance of highways and road structures, the statistical data are needed for the vehicle, especially heavy truck crossing. So far, static weighing has been used but it needs fixed station, crews, and it takes a lot of time. Also truck mix and headway distances cannot be obtained. Bridge Weigh-In-Motion system uses the bridge as a weighing scale and collects the axle weights, axle distances. vehicle types and etc. without stopping or slowing down the vehicle. In this study, for the first time in the country, BWIM system is applied on steel I-girder bridge and its applicability is examined. Also data collected in this system is analyzed to get truck traffic characteristics including average daily truck traffic, weight distribution, typical truck configuration and overweight truck status. The results are compared with other data from weighing station and highway toll gates.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.10-18
• /
• 2024

Vehicle loading is one of the main causes of bridge deterioration. Although WiM (Weigh in Motion) can be used to measure vehicle loading on a bridge, it has disadvantage of high installation and maintenance cost due to its contactness. In this study, a non-contact method is proposed to estimate the vehicle loading history of bridges using deep learning and CCTV images. The proposed method recognizes the vehicle type using an object detection deep learning model and estimates the vehicle loading based on the load-based vehicle type classification table developed using the weights of empty vehicles of major domestic vehicle models. Faster R-CNN, an object detection deep learning model, was trained using vehicle images classified by the classification table. The performance of the model is verified using images of CCTVs on actual bridges. Finally, the vehicle loading history of an actual bridge was obtained for a specific time by continuously estimating the vehicle loadings on the bridge using the proposed method.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.4
• /
• pp.11-21
• /
• 2000

The travel behavior should be analysed microscopically for the traffic management of urban street. The car following theory which found out the correlation between the lead and the following vehicles is being widely used as basic data in many fields. As the vehicle position and its speed information can be received by GPS, this technique is recently applying to the various fields. For the case study the travel data were collected with two vehicles equipped with GPS receiver. The moving distance was calculated by the collected location data every 2 seconds and the speed variation was checked. And this study analysed and compared the acceleration and deceleration speed between the lead and the following vehicle. Finally, Regression model about the relationship between the acceleration and deceleration speed and the acceleration and deceleration distance was constructed. This model could be helpful for the road design and the regulation for the safe traffic management.

• Journal of Industrial Convergence
• /
• v.18 no.3
• /
• pp.53-61
• /
• 2020

Travel speed is an important parameter for measuring road traffic and incident detection system. In this paper I suggests a model developed for estimating reliable and accurate average roadway link travel speeds using image processing sensor. This method extracts the vehicles from the video image from CCTV, tracks the moving vehicles using deep neural network, and extracts traffic information such as link travel speeds and volume. The algorithm estimates link travel speeds using a robust data-fusion procedure to provide accurate link travel speeds and traffic information to the public. In the field tests, the new model performed better than existing methods.

• Journal of Korean Society of Transportation
• /
• v.16 no.2
• /
• pp.145-155
• /
• 1998

대도시 가로망의 대부분은 신호교차로와 신호교차로가 연결되는 가로(link)로 구성되어 있어 가로의 통행시간은 가로의 주변여건, 차량간의 상호작용 및 교통신호등과 같은 요소에 영향을 받게된다. 따라서 본 연구의 목적은 대도시 가로망에서 신호 연동체계로 운영되는 가로의 통행시간을 예측할 수 있는 모형을 개발하는데 있다. 본 연구는 대구광역시 가로망을 대상으로 연동가로의 교통흐름을 가장 잘 나타내는 Greenberg모형을 이용하여 연동가로의 통행시간 모형을 도출하였다. 도출된 연동가로의 통행시간 모형은 임계통행시간$(t_m$)과 교통량 대가로최대교통량비$(q/q_m)$의 함수로 이루어졌다. $t_m$모형은 안정류상태의 통행시간 및 불안정류상태의 통행시간의 비를 이용하여 개발하였고 가로 용량모형은 상류부와 하류부의 신호조건에 따른 변수와 가로길이를 변수로 하는 모형을 개발하였다. 개발된 모형은 대구광역시를 대상으로 조사한 12개의 연동가로의 자료를 적용하여 연동으로 운영되는 가로의 통행시간 모형을 도출하였다. 도출된 통행시간 모형은 도로용량에 제시한 모형에 비하여 간단하게 가로의 통행시간을 추정할 수 있으며 교통계획에 적용되는 통행시간모형 비하여 가로의 신호 및 운영조건을 포함한 세부적인 통행시간 모형이다.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.73-82
• /
• 1998

본 연구의 목적은 일주일간 조사된 개인통행행태를 고려한 각 특성별 통행발생예측 방법을 제시하는데 있다. 이를 위하여 일주일간 통행빈도수의 차이를 고려한 집단간 차이를 검정하고, 그 원인을 분석하여 이에 따른 특성별 개인 통행발생예측 모형을 정립하였다. 전체 표본의 각 특성별 개인 내부 변이성을 분석해 본 결과 기간의 차이에 따른 개인 통행행태의 변화는 직업별, 나이별, 성별, 차량소유 유무, 주택소유 형태, 통행목적, 통행수단, 가구원수에 따라 집단간 차이를 보여주었다. 이러한 변수를 이용한 통행발생 예측모형의 분석결과 개인소득이 높을수록, 주책을 자가로 소유한 경우, 자동차를 소유한 경우, 학생일수록, 유직일수록 개인 통행발생량이 많은 것으로 분석되었다. 반면, 아니는 연령대가 높아질수록 통행수가 적어졌다.