• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.597-603
• /
• 2014

The cargo of ships and offshore structures is the number of oil of combustibility and volatile, oil processing cargo. Furthermore heavy cargo of the vehicle or container box or bulk cargo are occupied the remainder of cargo. In addition, there is a possibility to move the location of the cargo and the vessel because it is received periodic / non-periodic a load of wave and ocean current. Therefore a shipboard hazard is much greater than onshore industry hazard. Monitoring and preparation for safety are necessary things because there is always risk of accidents arise from the impact of the freight and cargo of ships and offshore structures. In this study, we conducted a study with respect to the introduction of the wireless sensor network monitoring system to ensure the safety of the crew and workers on shipboard.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.181-188
• /
• 2011

With the rapid proliferation of wireless networks and mobile computing applications, the landscape of the network security has greatly changed recently. Especially, Vehicular Ad Hoc Networks maintaining network topology with vehicle nodes of high mobility are self-organizing Peer-to-Peer networks that typically have short-lasting and unstable communication links. VANETs are formed with neither fixed infrastructure, centralized administration, nor dedicated routing equipment, and vehicle nodes are moving, joining and leaving the network with very high speed over time. So, VANET-security is very vulnerable for the intrusion of malicious and misbehaving nodes in the network, since VANETs are mostly open networks, allowing everyone connection without centralized control. In this paper, we propose a weighted intrusion detection method using rough set that can identify malicious behavior of vehicle node's activity and detect intrusions efficiently in VANETs. The performance of the proposed scheme is evaluated by a simulation study in terms of intrusion detection rate and false alarm rate for the threshold of deviation number ${\epsilon}$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.76-90
• /
• 2010

Location Service is required in position-based routing for VANET to provide position information. We propose Grid-based Location service spot(GLSS) scheme for optimized routing path to improve accessibility and load balance in location service. Specific area is defined as Location service spot(LSS) on each grid in this scheme, and all nodes in the grid geocast its location update message and location request message to each LSS. Location request messages are flooded throughout LSSs, location reply messages establish optimized route from the source grid to the destination grid. We evaluated GLSS which establishes optimized route on the grid comparing GPSR in consideration of road condition and geographical features.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.521-528
• /
• 2018

Military vehicles use run-flat wheels for emergency situations. Run-flat wheels can run required distance in a defined duration with the pressure loss tire. For the application of a run-flat system, wheels are designed in 2 pieces, including an inner rim and outer rim. These rims are assembled using clamping bolts. Clamping bolts determine the durability of military vehicle wheels because fracture of clamping bolts account for most wheel failures. For improving wheel durability, clamping bolt durability must be improved. In this study, wheel test conditions and bolt design were investigated. Existing test standards are not sufficient to conduct endurance tests. Supplementary conditions were investigated. Using these modified test conditions, the durability of wheels including clamping bolts was tested and verified. Results found the durability of wheels improved more than 168%. This study also proposes improvements in the design process of clamping bolts.

• Science of Emotion and Sensibility
• /
• v.6 no.3
• /
• pp.1-11
• /
• 2003

The purpose of the present driving simulation study was to examine the effect of cellular-phone use on driving performance when required driving speeds were systematically varied(60, 80, 100, or 120km/h) while either using cellular-phones(experimental condition; Hands-Free or Hands-Held) or not(control condition). Driving performance was measured both by longitudinal vehicle control(i.e., variabilities in driving speed and headway) and lateral vehicle control(variabilities in lane position). The results can be summarized as followings: (1) The significant difference in driving speed variation between the two cellular-phone usage conditions was found only at relatively higher driving speed conditions(i.e., over 80km/h). (2) Only in the experimental condition where cellular-phone was required to be used while driving, the magnitudes of variation in driving speed, headway and lane position were gradually increased as the required driving speeds were increased(this tendency was not found in control condition). And. (3) the dependent measures of this study appeared to suggest that cellular-phone usage itself (rather than the types of cellular-phone) had significant impact on driving performance. Finally, implication and issues related to this study were discussed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.4
• /
• pp.793-805
• /
• 2015

Due to the rise of automotive security problems following automotive safety and the progress of the internet technology leading to a hyper-connected society, guaranteeing the safety of automotive requires security plans in the supply chain assurance and automotive software, and risk management plans for identifying, evaluating, and controlling the risks that may occur from the supply chain since the modern automotive is a Safety Critical system. In this paper, we propose a study on Automotive Supply Chain Risk Management (A-SCRM) procedures by person interested within the automotive Life-Cycle.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.3
• /
• pp.337-344
• /
• 2004

ITS(Intelligent transportation system) provides users with realtime traffic information based on technologies such as advanced information ＆ telecommunication, electronic control and transportation engineering. To operate efficient ITS, it is necessary to quickly identify and take actions for incidents(accidents, broken vehicles, public functions, traffic control, etc.). However, there have been few reliable incident detection algorithms developed so far. The algorithm presented in this study greatly resolved the problems in the existing incident detection algorithms, which determine incidents according to the input of constant values, by defining ranges based on the concept of pseudo level of service. With this improvement, operators can determine the incident detection parameters more accurately.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.498-500
• /
• 2012

비디오 해석 및 추적기술은 특정한 시스템에서만 적용되는 것이 아니다. 이것은 비디오 내에서 의미 있는 정보를 능동적으로 감시 대상을 정의, 해석, 모델화, 추정 및 추적 할 수 있는 기반 기술을 의미하다. 일반적으로 감시시스템에서 감시 대상은 사람이나 차량이며, 상황에 따라 출입통제 구역으로 설정하기도 한다. 이는 연속된 영상에서 객체의 형태, 모양, 행동 분석, 움직임, 색상정보를 가지고 데이터 정의, 검출, 모델화를 통하여 인식, 식별 그리고 추적한다. 본 논문에서는 비디오 영상분석을 통해 단일카메라기반의 감시시스템과 PTZ 카메라기반 감시시스템 제안한다. 이때 단일 카메라기반의 감시는 배경생성방법을 이용하여 연속된 영상내의 객체를 지속적으로 관리가 가능하도록 설계하였고, PTZ 카메라기반의 감시는 카메라의 이동에 따른 배경안정화 방법과 카메라의 절대좌표를 활용하여 카메라 이동을 제어함과 동시에 오검출 문제를 해결하였다. 실험 및 결과분석으로는 시나리오 환경에서 배경생성방법을 이용한 검출의 정확성과 PTZ카메라 위치 변화에도 강인한 검출 결과를 비교 분석하였다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.207-230
• /
• 2010

Nowadays, the arson is not common interest happening. the arson has been handled with a crime of violence along with murder, robbery and rape. because of being detrimental to the public clam. but the arson a has not been made award of a serious social problem. There is a rise in the control pos-sibility according to a level of national concern. we have known that the last fire accident of the Dea-gu underground It took a heavy toll of lives and the property due to our no interest in arson. The government should not only make up for legislation and systematize to correct a defect but also there is uniting the countermeasure system of the organs. The government establish particular research institution of the arson to consider a useful countermeasure. a purpose of this study is to enhance the concern and cognition of people and to search for the effective approach on the control of crime arson which is increasing recently.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2005.05a
• /
• pp.103-112
• /
• 2005

자동화 컨테이너 터미널의 생산성을 향상시키기 위해서는 장치장과 안벽 사이를 오가며 컨테이너를 운반하는 무인유도 차량(Automated Guided Vehicle: AGV)들이 효율적으로 주행하여 제 시간에 필요한 위치에 도착함으로써 연계 작업들의 지연을 최소화하여야 한다, 만일 AGV들이 목적지까지 주행하여야 하는 거리가 길거나 주행 중에 다른 AGV들과의 충돌이나 교축을 피하기 위하여 대기하여야 하는 상황이 빈번히 발생하면 주행 효율이 떨어지게 된다, 주행 경로의 길이를 줄이기 위하여 경로들을 보다 유연하게 설정할 수 있게 허용하면 경로들간의 교차 가능성이 높아져 교통 통제가 어려워지고 결과적으로 충돌과 교착이 발생할 가능성은 높아진다. 특히 교착을 사전에 방지하기 위하서는 문제가 발생할 소지가 있는 영역을 미리 파악하여 일부 영역을 다른 AGV들이 점유하지 못하도록 제한하여야 하는데, 이는 자칫 AGV 주행 공간의 활용도를 떨어뜨릴 수 있다. 또한 교착의 파악과 이를 방지하기 위한 제어는 실시간에 이루어져야 하므로 연산 부담이 상당하다. 본 논문에서는 유연한 주행 경로 설정이 가능하며 주행 공간을 효율적으로 활용할 수 있는 주행 경로 표현법과 충돌 방지 방안을 제안한다. 또한 교착 발생 가능성을 사전에 파악하고 회피(avoidance)하는데 소요되는 연산비용을 줄여 실시간 적용 가능성을 높이기 위하여 교착해결(deadlock resolution)에 기반을 둔 AGV 주행 관리 방안을 제시한다. 본 논문에서 제안하는 방안의 효율성을 시뮬레이션을 통하여 검증해 보았다.