• Solar Energy
• /
• v.12 no.1
• /
• pp.95-102
• /
• 1992

A small scale solar collector system composed of a Fresnel lens of $0.5m^2$ area as a solar concentrator and a compact fluidized-bed solar receiver was developed. Performance and temperature distribution in the fluidized bed receiver were measured using SiC for particles and air for working fluid. The maximum gas temperature was attained up to 1250K at this moment. In this study, energy efficiency achieved by the present experiment was high for the small scale solar collector system and compact receiver.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.378.1-378
• /
• 2002

DVD, HD(High Density)-DVD등의 고밀도 광 디스크의 광 기록재생장치는 고 개구율(Numerical Aperature)의 대물렌즈로 집광 빔의 크기를 소형화하여 기록용량을 증대시키고 있다. 이 경우 광축과 광 디스크의 기록면에 대한 경사는 광학적인 수차가 발생되어 신호 레벨의 저하나 기록시의 피트(pit) 형성의 오류, Crosstalk등의 문제가 발생한다. 이를 극복하기 위해 직접 디스크의 경사에 따라 제어할 수 있는 픽업 구동기가 제안되어 왔지만 주로 Half Height(12.7mm)에 사용되는 틸트 구동기였으며 Slim(6.3mm)형 틸트 구동기는 제안되지 못하였다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.304-310
• /
• 1994

The use of thermally expanded core (TEe) fibers fabricated by thermal diffusion of dopants such as $GeO_{2}$ in hybrid fiber components has an advantage of eliminating lenses for collimation and focusing. An electric furnace is fabricated to heat the fibers locally for the core expansion. We observed an expansion of the mode size at $1.3\mu\textrm{m}$ wavelength by 27% after treating a section of single mode optical fiber at $1250^{\circ}C$ for 10 hours. hours.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.28-29
• /
• 2003

레이저 빔의 세기 분포를 측정하는 knife edge 방법은 레이저의 발명과 함께 시작 되었다. 사용이 편리한 카메라를 이용한 레이저 빔의 세기 분포 측정 장치에 비해, 진행 방향과 수직한 방향에 대해 대칭성을 가져야만 적용이 가능한 knife edge 방법이 지금까지도 사용되는 이유는 높은 공간 분해능(spatial resolution) 때문이다. Z-scan 방법은 렌즈로 집광시킨 빔의 초점 영역에 샘플을 두고, 샘플을 빔의 진행 방향으로 이동시키면서, 샘플의 두께에 비해 먼 영역에 있는 작은 개구를 통해 측정한 빔의 투과도를 샘플이 없을 때의 투과도로 규격화하여 나타낸 것이다. (중략)

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.11
• /
• pp.83-90
• /
• 2011

There are two main types of concentrating optical systems in use today: refractive types that use Fresnel lenses, and reflective systems that use one or more mirrors. Regardless of the chosen optical system, the result is concentrated sunlight being aimed at the sensitive face of the cell, to produce more energy from less photovoltaic material. In this paper, for the achieve trackerless CPV system, CPV module included that the spherical lens with reflect mirror makes it possible to achieve high and stable power generation performance for the high concentration photovoltaic power generation system and cope with the needs for a variety of shapes and sizes in flexible manners and that the multiple cavity assemble method greatly reduces costs. Development of these high performance multi-junction CPV module promises to accelerate growth in photovoltaic power generation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.218-219
• /
• 2007

Silicon feed stock shortage have acted as major restraints for growth of photovoltaic industry. Concentrating photovoltaic (CPV) system will reduce the use of silicon PV materials. This paper presents the application possibility of mono-crystalline silicon solar cell, which has increased in market share, for PV concentrator. We measured the power of solar cell using sun simulator and I-V curve tracer and compared the results. The comparison of results showed that the concentrated solar cell generated the power more approximately 7 times than without concentration in spite of non-heat sink. If CPV technology included heat sink combines already developed PV tracking system, it will have a merit economically.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.2
• /
• pp.156-164
• /
• 2016

Qualification model(QM) of main payloads including concentrating photovoltaic system using fresnel lens, heating wire cutting type shockless holding and release mechanism, and MEMS-based solid propellant thruster have been developed for the STEP Cube Lab.(Cube Laboratory for Space Technology Experimental Project), which is a pico-class satellite for verification of core space technologies. In this study, we have verified structural safety and functionality of the developed payloads under a qualification temperature range through the QM thermal vacuum test. Additionally, a reliability of thermal model of the payloads has been confirmed by performing a thermal correlation based on the thermal balance test results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.320-320
• /
• 2012

III-V 화합물 태양전지는 실리콘, CdTe, CIGS, 염료, 및 유기 등 다른 태양전지에 비해 1sun 상 30% 이상의 고효율을 갖고 있고 앞으로도 계속 증가할 수 있는 가능성을 갖고 있다. 그 이유는 직접천이형 밴드갭, 높은 이동도 등의 고성능 물질특성과 더불어 3족과 5족의 비율을 조절함으로써 같은 결정구조를 갖고 에너지 밴드갭이 다른 물질들을 만들기에 용의하여, 태양전지 스펙트럼의 넓은 영역을 흡수할 수 있는 장점이 있기 때문이다. 그러나, 셀자체의 물질이 실리콘에 비하여 고가이므로, 고성능이 요구되는 우주 인공위성등에 적용이 되었지만, 2000년대 이후로 집광에 적용가능한 태양전지의 연구를 거듭하여 2005년부터는 값싼 프레넬 렌즈를 이용하여 1sun에 비해 500배 해당하는 빛을 셀에 집광하여 보다 효율을 증가시킴으로써 지상발전용에도 적용가능한 셀을 형성하게 되었다. 더불어 태양전지의 효율을 증가시키기 위한 개선된 구조적 변화의 시도도 많이 이루어지고 있다. 최근 보고에 의하면 실리콘 태양전지의 표면에 texture 또는 나노 구조를 주어 높은 흡수율과 낮은 반사율을 갖게 함으로써 효율을 증가시키는 사례가 많아지고, III-V 화합물 태양전지도 texturing에 의해 증가된 효율을 발표한바 있다. 본 연구에서는 태양전지의 효율을 증가시키기 위하여 III-V 화합물 태양전지 표면에 micro-hole array texture 구조를 형성한 후 나노 particle을 이용한 나노 texture 구조를 형성하였다. Photo-lithography와 chemical wet etching으로 micro-hole array texture 구조를 형성하였으며 micro-hole의 직경은 $5{\sim}20{\mu}m$, hole과 hole의 간격은 $3{\sim}15{\mu}m$로 다양하게 변화를 주었다. 형성된 micro-hole array texture 구조위에 수십 nm 크기의 particle을 만들어 chemical wet etching으로 나노 texture 구조를 형성하였다. 태양전지 표면에 texture 구조가 있는 경우와 없는 경우에 각각 효율을 측정, 비교 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.799-804
• /
• 2011

The LFLP (Linear Fresnel Light Pipe) system uses a linear Fresnel lens to follow the sun and concentrates the parallel sunlight into a line. A LFLP daylighting system has been developed and updated to a DBLP (Double Blind Light Pipe) daylighting system to improve the overall system efficiency in the morning and afternoon. The new design consists of a double-blind style with a cone-shaped light transformer. The blinds are used to collect the sun's altitude and azimuth movements through the day. Behind the two sets of blinds is the light transformer, which is based on a parabolic-shaped light concentrator. The light transformer is designed to efficiently deliver light within a thirty-degree radial spread so that the light pipe can internally reflect the light. The results of scale-model tests are encouraging, and the efficiency is three times higher than that of the previous LFLP system.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.33-39
• /
• 2009

A microlens array (MLA) was developed based on the wet-etched quartz substrate and coating of UV adhesive on the substrate for maskless lithography application. The developed MLA has the focal length of ${\sim}45\;{\mu}m$ and the spot size of ${\sim}1\;{\mu}m$. The spot size of the focused beam passing through the MLA was detected by CCD camera, and its intensity was monitored by beam profiler. Uniform spots with nearly identical intensities were observed on the focal plane when a beam passes through the fabricated MLA. The focal length was varied depending on thickness of the coated UV adhesive. The thicker the thickness of the UV adhesive was, the shorter the focal length of the MLA was. With a general mask aligner, UV beam focusing was tested onto photoresist (PR). The beams were well focused onto PR when UV passes through the MLA. Depending on the variable distances from the MLA, beam sizes onto PR were controlled. Even at high temperature for a long time, the performances of the MLA were not changed.