• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.129-129
• /
• 2017

태양광 발전으로 생산된 전력으로 냉방기나 난방기를 직접 구동하는 경우에 냉방을 위해서는 7,8,9월 집광량이 많아야 하고, 난방을 위해서는 12,1,2월에 집광량이 많아야 한다. 하지만 일반적으로 사용되는 집광판은 평판형의 고정식이 대부분으로 필요에 따라서 집광량을 변동시키는 것이 불가능하다. 따라서 전력부하가 가장 큰 시기에 집량광이 가장 많아지도록 설치되어야 한다. 본 연구에서는 최적의 집광판 설치조건을 구명하기 위하여 집광판의 설치 각도에 따른 년중 일사량을 예측하기 위한 모델을 개발하고 계산된 일사량과 기상청에서 실측한 일사량을 비교하였다. 분석 대상은 대전(북위 36도 22분)으로 하였다. 년간 최대 일사량을 확보할 수 있는 집광판 설치각은 $36^{\circ}$로 분석되었다. 반면에 월별로 최대 일사량을 확보하기 위한 집광판 설치각도는 1월에 $57^{\circ}$, 2월에 $48^{\circ}$, 3월에 $36^{\circ}$, 4월에 $24^{\circ}$, 5월에 $15^{\circ}$, 6월에 $12^{\circ}$, 7월에 $15^{\circ}$, 8월에 $24^{\circ}$, 9월에 $36^{\circ}$, 10월에 $45^{\circ}$, 11월에 $57^{\circ}$, 12월에 $60^{\circ}$로 예측되었다. 한편 냉방부하가 많은 6.7.8.9월에 최대 일사량을 확보하기 위한 집광판 설치각도는 $21^{\circ}$로 예측되었다. 이상의 결과로 볼 때 태양광 발전을 위한 집광판은 전력부하와 용처에 따라 적정한 설치각도를 결정하는 것이 중요한 것으로 판단되었고, 본 연구에서 개발된 예측모델이 이러한 작업에 유효하게 사용될 수 있을 것으로 판단되었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.61-69
• /
• 2008

In this paper, an automatic escalator system is manufactured for concentrate lighting efficiency and maintenance improvement technology of street light used a solar condenser. It can be linked with street light used a solar condenser, improved concentrate lighting efficiency by regulating concentrate light angle of a solar condenser. It can be remove and attach to solar condenser and street light. By developing street light used a solar condenser with an automatic escalator system, the lighting efficiency of street light and the concentrate lighting efficiency of solar condenser are High. The maintenance fee of street light significantly reduce and traffic congestion during working hours of street light is prevent.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.114-117
• /
• 2008

본 연구에서는 알루미늄 반사판을 이용한 저집속 (2.25X) 집광형 태양광 모듈을 설계 및 제작하여 실증 연구를 실시하였다. 반사판을 이용한 집광형PV시스템의 성능향상을 평가하기 위하여, 일사량과 모듈온도 변화에 따른 출력변화와 효율변화를 평판형 모듈과 집광형 모듈에 대해서 각각 측정하고 비교하였다. 결과적으로 반사판을 사용 집속한 모듈이 약 20% 이상의 출력 증가를 보였으며, 모듈의 평균 온도 상승에도 불구하고 1.4 배의 발전효율 증가를 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.12
• /
• pp.927-934
• /
• 2015

In this study, we numerically investigated the concentration characteristics of a linear Fresnel reflector system that can drive a solar thermal absorption refrigeration system to be installed in Saudi Arabia. Using an optical modeling program based on the Monte Carlo ray-tracing method, we simulated the concentrated solar flux, concentration efficiency, and concentrated solar energy on four representative days of the year - the vernal equinox, summer solstice, autumnal equinox, and winter solstice. Except the winter solstice, the concentrations were approximately steady from 9 AM to 15 PM, and the concentration efficiencies exceed 70%. Moreover, the maximum solar flux around the solar receiver center changes only within the range of $13.0{\sim}14.6kW/m^2$. When we investigated the effects of the receiver installation height, reflector width, and reflector gap, the optimal receiver installation height was found to be 5 m. A smaller reflector width had a greater concentration efficiency. However, the design of the reflector width should be based on the capacity of the refrigeration system because it dominantly affects the concentrated solar energy. The present study was an essential prerequisite for thermal analyses of the solar receiver. Thus, an optical-thermal integration study in the future will assist with the performance prediction and design of the entire system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.118-120
• /
• 2008

고집속에 따른 태양전지 온도상승에 의한 태양전지 효율 저하를 방지하고,경제적인 저집속형(<5X) 집광형 태양광 모듈 개발을 위하여 본 연구에서는 알루미늄 반사판을 이용한 저집속 (< 5X)집광형 태양광 모듈을 설계 및 제작하여 성능 평가를 실시하였다. 2.25X의 집속비와, 태양광 집속에 의한 태양전지 모듈의 온도 상승을 공기순환을 통한 냉각이 가능하도록 설계/제작된 집광형 태양광 모듈로 부터 1.97배의 출력 증가를 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.53-56
• /
• 2009

반사와 굴절이 합쳐진 새로운 형태의 하이브리드 태양광 집광 장치로 기존 집광 장치에 비해 초점 거리가 짧게 설계되었다. 프레넬 렌즈 형태의 굴절부와 프레넬형의 다수의 포물선 반사경이 공통으로 후면 초점(rear focus)을 가지도록 배치하여 기존 프레넬 렌즈만으로 구성된 것보다 선형 집광의 경우는 3배, 점 집광의 경우는 10배 이상 집광비를 높일 수 있다.아울려 이를 이용한 선형 집광형 발전 시스템과 점형 집광 장치는 나름대로 장점을 가진다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.318-325
• /
• 2015

Pico satellite has limited surface to install the solar cells due to its extremely limited size. Also, the sun incidence angle with respect to the solar panel continuously varies according to the attitude control strategy and its important parameter for the power generation. In this study, a concentrating photovoltaic system for pico satellite application has been proposed that can enhance the power generation efficiency in case of the unfavorable condition of the sun incidence angle with respect to the solar panel of the satellite using the fresnel lens. To prove the possibility of maximizing the power generation efficiency of the proposed concentrating power system, we have performed the power measurement test using a solar simulator and commercial fresnel lens. And on-orbit analysis of the power generation efficiency using the STK which is a commercial S/W has also been performed based on the test results.

• New & Renewable Energy
• /
• v.4 no.4
• /
• pp.17-22
• /
• 2008

A low concentrating (< 5X) photovoltaic module with aluminum reflectors is fabricated and evaluated which is designed to reduce the affection of the high temperature to the solar cell modules preventing the efficiency lowering. As results, the output power is increased of 1.97X from the concentrating photovoltaic module which is designed with the concentrating ratio of 2.25X and to control the module temperature cooling the module by air circulation. Also, the effect of the concentrating module with aluminum reflectors on the conventional PV module is investigated at the field. The result shows the increase of the output power more than about 20% and the improvement of the module efficiency of 1.4X in spite of the increase of average module temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.352-355
• /
• 2000

Although for its great amount and cleanness solar energy has been studied a lot as a substitute one, it is limitedly being utilized in heating water and partly in special usage for high cost of installing solar cell in Korea. Consider domestic shortage of natural energy resources and environmental issue by the Climate Agreement treated in 1994, it is urgently needed to study the practical application of solar energy as a substitute one. Therefore in order to increase the efficiency of solar cell and decrease its price, this study treats the course of designing and manufacturing the panel that connects sunlight by fixing reflector.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2072-2078
• /
• 2011

In photovoltaic(PV) system, for obtaining maximum efficiency of solar power systems, the solar tracking system must be controlled to match position of the sun. In this paper, we design the solar tracking system to track movement of the sun using CdS sensor modules and to determine direction of the sun under shadow of directions. In addition, for an intelligent computation in tracking of the sun, a fuzzy controller is allocated to space avaliable for splitting area of fuzzy part for the fuzzy input space(grid-type fuzzy partition) in which a fuzzy grid partition divides fuzzy rules bases. As well, a simple model of solar tracking system is designed by two-axis motor control systems and the 8-direction sensor module that can measure shadow from CdS sensor modules by matching of axis of CdS modules and PV panels. We demonstrate this systems is effective for fixed location and moving vessels and our fuzzy controller can track the satisfactorily.