• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.369-378
• /
• 2024

Purpose: This study aims to verify structural stability by manufacturing a 40m full-scale specimen composed of a segmental U-shaped PSC girder with integrated tensioning systems and a concrete slab, proceeding dynamic behavior tests, and compare the results of the tests with the results of numerical analysis. Method: Dynamic behavior tests were conducted on a full-scale, undamaged specimen using an impact hammer, and the natural frequency and damping ratio were measured and compared with numerical analysis techniques and the general damping ratio of the facilities. Result: The natural frequency of the numerical analysis model consisting of a girder and slab composite section was calculated to be 2.561Hz, the natural frequency of the full-scale specimen was measured to be 2.670Hz, and the damping ratio was calculated to be 0.42~0.68%. Conclusion: The natural frequency of the full-scale specimen was found to be 4.3% larger than that of the numerical analysis model. Since the masses of the full-scale specimen and the numerical analysis model are the same as 99.97%, it can be derived that the stiffness of the full-scale specimen has secured structural safety and stability. As a result, the dynamic behavior stability of the specimen was verified. The measured damping ratio of 0.42~0.68% was found to be a stable dynamic behavior compared to the PSC structures damping ratio of 0.5~1.0% in the elastic region.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.22-27
• /
• 2014

Purpose There is the recent PET/CT scan in tendency that use low dose to reduce patient's exposure along with development of equipments. We diminished $^{18}F$-FDG dose of patient to reduce patient's exposure after setting up GE Discovery 690 PET/CT scanner (GE Healthcare, Milwaukee, USA) establishment at this hospital in 2011. Accordingly, We evaluate acquisition time per proper bed by change of infusion dose to maintain quality of image of PET/CT scanner. Materials and Methods We inserted Air, Teflon, hot cylinder in NEMA NU2-1994 phantom and maintained radioactivity concentration based on the ratio 4:1 of hot cylinder and back ground activity and increased hot cylinder's concentration to 3, 4.3, 5.5, 6.7 MBq/kg, after acquisition image as increase acquisition time per bed to 30 seconds, 1 minute, 1 minute 30 seconds, 2 minute, 2 minutes 30 seconds, 3 minutes, 3 minutes 30 seconds, 4 minutes, 4 minutes 30 seconds, 5 minutes, 5 minutes 30 seconds, 10 minutes, 20 minutes, and 30 minutes, ROI was set up on hot cylinder and back radioactivity region. We computated standard deviation of Signal to Noise Ratio (SNR) and BKG (Background), compared with hot cylinder's concentration and change by acquisition time per bed, after measured Standard Uptake Value maximum ($SUV_{max}$). Also, we compared each standard deviation of $SUV_{max}$, SNR, BKG following in change of inspection waiting time (15minutes and 1 hour) by using 4.3 MBq phantom. Results The radioactive concentration per unit mass was increased to 3, 4.3, 5.5, 6.7 MBqs. And when we increased time/bed of each concentration from 1 minute 30 seconds to 30 minutes, we found that the $SUV_{max}$ of hot cylinder acquisition time per bed changed seriously according to each radioactive concentration in up to 18.3 to at least 7.3 from 30 seconds to 2 minutes. On the other side, that displayed changelessly at least 5.6 in up to 8 from 2 minutes 30 seconds to 30 minutes. SNR by radioactive change per unit mass was fixed to up to 0.49 in at least 0.41 in 3 MBqs and accroding as acquisition time per bed increased, rose to up to 0.59, 0.54 in each at least 0.23, 0.39 in 4.3 MBqs and in 5.5 MBqs. It was high to up to 0.59 from 30 seconds in radioactivity concentration 6.7 MBqs, but kept fixed from 0.43 to 0.53. Standard deviation of BKG (Background) was low from 0.38 to 0.06 in 3 MBqs and from 2 minutes 30 seconds after, low from 0.38 to 0 in 4.3 MBqs and 5.5 MBqs from 1 minute 30 seconds after, low from 0.33 to 0.05 in 6.7 MBqs at all section from 30 seconds to 30 minutes. In result that was changed the inspection waiting time to 15 minutes and 1 hour by 4.3 MBq phantoms, $SUV_{max}$ represented each other fixed values from 2 minutes 30 seconds of acquisition time per bed and SNR shown similar values from 1 minute 30 seconds. Conclusion As shown in the above, when we increased radioactive concentration per unit mass by 3, 4.3, 5.5, 6.7 MBqs, the values of $SUV_{max}$ and SNR was kept changelessly each other more than 2 minutes 30 seconds of acquisition time per bed. In the same way, in the change of inspection waiting time (15 minutes and 1 hour), we could find that the values of $SUV_{max}$ and SNR was kept changelessly each other more than 2 minutes 30 seconds of acquisition time per bed. In the result of this NEMA NU2-1994 phantom experiment, we found that the minimum acquisition time per bed was 2 minutes 30 seconds for evaluating values of fixed $SUV_{max}$ and SNR even in change of inserting radioactive concentration. However, this acquisition time can be different according to features and qualities of equipment.

• Journal of Acupuncture Research
• /
• v.25 no.2
• /
• pp.11-26
• /
• 2008

목적 : 홍삼약침(藥鍼)이 고혈당 및 지질대사장애에 미치는 개선효과와 그 기전을 조사하고자 한다. 방법 : 홍삼약침(藥鍼)의 anti-diabetic 활성과 그 기전을 C57BL/KsJ db/db mice를 이용하여 관찰하였다. 실험 동물은 대조군(DC), 홍삼약침(藥鍼)군(RGL, RGH) 및 양성대조군(MET, GPZ, PIO)의 6군으로 나누었다. 홍삼약침(藥鍼)군은 $0.2m{\ell}$의 홍삼약침멸(藥鍼滅)을 각각 100mg/kg(RGL) 및 200mg/kg(RGH)씩 인체의 간유(肝兪)($BL_{18}$)에 상응하는 혈위에 1일 1회 10주간 좌우 혈을 번갈아가며 약침 시술하였다. 양성대조군은 metformin 300mg/kg(MET), glipizide 15mg/kg(GPZ) 및 pioglitazone 30mg/kg(PIO)을 각각 1일 1회 10주간 경구투여 하였다. 체중과 혈당은 매주 측정하였다. 실험 10주 후에는 혈액채취로 혈중 glucose, 당화혈색소(HbAlc), insulin, 중성지방(TG), adiponectin, leptin, non-esterified fatty acid(NEFA)를 측정 하였고, 간 조직을 채취하여 조직학적 검사 및 gene expression 분석을 시행하였다. 결과 : 홍삼약침(藥鍼)(RGL, RGH)은 10주 동안 C57BL/KsJ db/db mice의 체중을 증가시키는 부작용은 나타나지 않았다. 홍삼약침(藥鍼)군(RGL, RGH)의 사료섭취량은 대조군과 비슷하였으나 음수량은 증가하였다. 홍삼약침(藥鍼)(RGL, RGH)은 대조군에 비하여 각각 19.8% 및 18.3% 혈당을 낮추었고, 홍삼약침(藥鍼)(RGL)은 insulin resistance를 27.7% 감소시켰으며, 경구내당능 검사의 혈중 glucose에서는 대조군에 비해 홍삼약침(藥鍼)군(RGL, RGH)과 양성대조군(MET, GPZ, PIO)에서 각각 19.8%, 18.3%, 67.7%, 52.3% 및 56.9% 감소시켰다. 당화혈색소(HbAlc)는 홍삼약침(藥鍼)(RGL, RGH), MET, GPZ 및 PIO군에서 대조군에 비하여 각각 11.0%, 6.4%, 18.9%, 16.1% 및 27.9% 감소시켰으며, 혈중 glucose감소와 유사한 경향을 나타내었다. 홍삼약침(藥鍼)(RGL)은 대조군에 비해 TG와 NEFA를 각각 18.8% 및 16.8% 감소시켰고, adiponectin과 leptin을 각각 20.6% 및 12.1% 증가시켰다. 홍삼약침(藥鍼)(RGL, RGH)은 중성지방의 침착으로 인한 간의 질량비 증가를 억제하지 못하였으나, 지방구를 감소시겼음을 관찰할 수 있었다. Microarray 분석에서는 홍삼약침(藥鍼)(RGL, RGH)이 간에서 glycolysis, gluconeogenesis 및 fatty acid beta-oxidation과 관련된 유전자 발현에 영향을 미치는 것으로 나타나 양성대조군 metformin과 유사한 기전을 나타내었다. 요약 : 홍삼약침(藥鍼)은 T2DM동물모델(C57BL/KsJ db/db mice)에서 항당뇨 및 지질대사 개선활성이 있었다. 홍삼약침(藥鍼)은 C57BL/KsJ db/db mice의 간조직에서 lipogenesis억제 및 fatty acid beta-oxidation활성을 통해 혈당 이용을 높이고, insulin sensitivity를 향상시켰다. 또한 유전자 발현분석을 통해 그 기전이 metformin과 유사함을 확인할 수 있었으므로 향후 홍삼약침(藥鍼)의 새로운 약침 기술 개발 근거가 될 수 있을 것으로 사료된다.

• Journal of Life Science
• /
• v.20 no.4
• /
• pp.535-542
• /
• 2010

This study was carried out to examine anthropometric parameters and related habits in female college students. Mean age, height, and body weight of the subjects in total (n=212) were 20.7 yrs, 161.8 cm, and 53.5 kg, respectively. Anthropometric parameters were measured by bioelectrical impedance analysis. Mean degree of obesity, body mass index (BMI), and waist-hip ratio (WHR) were 98.4%, $20.6\;kg/m^2$, and 0.80 respectively. Surprisingly, 63.7% of the subjects showed unbalanced weak upper bodies compared to their lower bodies. Therefore, they were divided into two groups: unbalanced weak upper body group (UU, n=135) and balanced upper body groups (BU, n=77). Bodyweight, degree of obesity, BMI, and WHR in the UU group were significantly lower than those in the BU group. Amounts of body protein, body fat, and body mineral in the UU group were also significantly lower than those of the BU group. Mid-arm muscle circumference of the UU group ($18.5{\pm}0.8\;cm$) was significantly lower than those of BU group ($20.4{\pm}1.2\;cm$), although mid-arm circumference of the UU group was not significantly different compared to those of the BU group. On a questionnaire on exercise habits, 1.5% of the UU group and 7.8% of the BU group answered that they exercised regularly, and 55.5% of the UU group and 31.2% of the BU group reported that they never exercised (p<0.01). Even in the subjects who exercised, the duration of the exercise was not sufficient because 38.4% of the UU group and 35.8% of the BU group answered that they exercised for less than 30 min. In conclusion, interventions in exercise habits may be needed for female college students who have unbalanced weak upper bodies.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.308-316
• /
• 2009

To achieve the accurate evaluation of given absorbed dose from output dose of linear accelerator photon beam through investigate the characteristics of LiF:Mg,Cu,P TLD powder. This experimental TL phosphor is performed with a commercial LiF:Mg,Cu,P powder (Supplied by PTW) and TL reader (LTM, France). The TLD was exposed to 6 MV X rays of linear accelerator photon beam with range 15 to 800 cGy in blind dose at two hospitals. The dose evaluation of TLD was through the experimental algorithms which were dose dependency, dose rate dependency, fading and powder weight dependency. The glow curve has shown the three peaks which are 110, 183 and 232 degrees of heating temperature and the main dosimetric peak showed highest TL response at 232 high temperature. In this experiments, the LiF:Mg,Cu,P phosphor has shown the 2.5 eV of electron trap energy with a second order. This experiments guided the dose evaluation accuracy is within 1% +2.58% of discrepancy. The TLD powder of LiF:Mg,Cu,P was analyzed to dosimetric characterists of electron captured energy and order by glow shape, and dose-TL response curve guided the accuracy within 1.0+2.58% of output dose discrepancy.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.1
• /
• pp.87-98
• /
• 1998

This study was conducted to investigate Osteoporosis on the effect of dietary factors and past young age period's dairy products consumption on BMD in 170 postmenopausal Korean women without diagnosed disease. Bone mineral density(BMD) of lumbar spine was investigated by dual energy X-ray absorptiometry. Dietary assesment of the subjects were measured by Cognitive Food Frequency Recall method. The measurements of group average were 57.9kg of body weight, 36.73 of BMI(Body Mass Index), 2103.3㎉ of energy, 638.7mg of dietary calcium, 70.3g of protein, and 10.58mg of iron. Nutrient intake levels were similar to or more than the level of Korean Recommended Dietary Allowances. Bone Mineral Density(BMD) of Lumbar spine(L2-L4) of group average was 0.912g/$\textrm{cm}^2$, and under 50 yr's 1,02g/$\textrm{cm}^2$, 50~54 yr's 0.92g/$\textrm{cm}^2$, 55~59 yr's 0.85g/$\textrm{cm}^2$, over 60 yr's 0.85g/$\textrm{cm}^2$, had been getting low degree on aging. BMD of the Lumbar spine was positively correlated with calorie, body weight, dietary calcium, protein, phosphorus and serum albumin. Past dairy products consumption experiment was highly significant on BMD in teenage period(R square = 26, p-value 0.0031). Particularly in over 60 yr group, the correlations between BMD and past dairy products consumption in teenage period had shown highly significance(r=0.48, p<0.02). 55~59 yr age group had also positive correlation(R squae = 0.29, p<0.05). This results confirm that the most effective way of preventing osteoporosis and the fractures is to maximize peak bone mass in early life and to minimize bone loss through the balanced intake of Ca and other nutrients and regular physical activity.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.2
• /
• pp.210-218
• /
• 2003

Background : Sex specific cross sectional reference values for the lung function indices usually employ a linear model with a term for age and height. The purpose of this study was to determine the effects of the body mass index (BMI), the fat percentage of the body mass and the fat-free mass index (FFMI) on the forced expiratory volume curve. Methods : Between January 2000 and December 2001, a total of 300 subjects, 150 men and 150 women (mean age : $45{\pm}13$ years), with a normal lung function were enrolled in the study sample. This study measured the $FEV_1$, FVC and $FEF_{25-75%}$ from the forced expiratory volume curve by a spirometer and the body composition by a bioelectrical impedance method in all subjects. Multiple regression analysis was used in order to examine the effects of the body composition on the parameters derived from the forced expiratory volume curve. Results : After adjusting for age, the BMI and Fat percentage improved the descriptions of the FVC (p<0.05, $r^2=0.491$) and $FEV_1$ (p<0.05, $r^2=0.654$) in women. In contrast, the FFMI contributed significantly to the FVC (p<0.05, $r^2=0.432$) and $FEV_1$ (p<0.05, $r^2=0.567$) in men. The $FEF_{25-75%}$ correlated with the fat percentage in women (p<0.05, $r^2=0.337$). Conclusion : These results suggest that the BMI, the fat percentage and the FFMI are significant determinants of the forced expiratory volume curve. The plmonary function test, when considering the BMI, the fat percentage and the FFMI, might be useful in clinical applications.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.161-170
• /
• 2003

The aesthetic restorative materials are widely used in recent dentistry, showed not only the different quality between each component but also showed that the environment of the material has important effect on the physical properties of the material. Especially, when the restoratives are restored in the mouth, and since saliva is existing, the restoratives are always exposed to water and affected by the saliva. The purpose of this study was to research and compare the change of the degree of water sorption after water immersion of three types of the resin-based materials and the compressive strength, and observe the relation between the change of the water absorbing degree and the compressive strength. Z-100(3M, U.S.A) as a composite resin, F-2000(3M, U.S.A) as a compomer and Vitremer Restoratives(3M, U.S.A) as a resin-modified GIC were used, and each specimen was made to measure the water sorption and to evaluate the compressive strength. The specimens for measurement of the water sorption and the compressive strength were divided into 4 groups(1 day, 2 weeks, 4 weeks, and 8weeks). Each specimen was filled in the 30cc vial with 20cc of distilled water during the fixed amount of period in $37^{\circ}C$. The water sorption is decided by dividing the difference of weight before and after the immersion by the volume, and the compressive strength was measured by using the instron after the immersion. The following results were obtained ; 1. The more the water sorption increased, the more the immersion period of three restorative materials was long. And the most of water sorption was obtained during the first 2 weeks(P<0.001). 2. The water sorption of resin-modified GIC was higher than composite resin and compomer. 3. The more the compressive strength decreased, the more the immersion period of three restorative materials increased(composite resin and compomer: P<0.001, resin-modified GIC: P<0.05). Especially, the amount of the reduction in compressive strength of the composite resin was the highest. 4. The more the water sorption of all materials increased, the more the compressive strength decreased(P<0.05).

• Korean Journal of Environmental Agriculture
• /
• v.36 no.2
• /
• pp.113-118
• /
• 2017

BACKGROUND: The carbon (C) isotope ratio (${\delta}^{13}C$) of dissolved organic C (DOC) is an indicator of water pollution source. In this study, the potential use of two pre-treatments for the ${\delta}^{13}C$ analysis, alkaline persulfate oxidation coupled with carbonate precipitation (precipitation) and freeze drying (drying), were compared to suggest a more feasible pre-treatment method. METHODS AND RESULTS: Two reference materials with different ${\delta}^{13}C$ values were used for the experiments; chemical grade glucose ($-12.0{\pm}0.02$‰) and pig manure compost extract ($-23.3{\pm}0.04$‰). In the precipitation method, the measured ${\delta}^{13}C$ values were consistently lower than the theoretically calculated values as dissolved $CO_2$ could not be removed due to the alkaline property of the reagents and the dissolution of air $CO_2$ into the alkaline solution. The drying method also resulted in more negative ${\delta}^{13}C$ than the calculated ${\delta}^{13}C$; however, the difference was systematic ($3.9{\pm}0.3$‰) and there was a strong correlation (${\delta}^{13}C_{calculated}=0.87{\times}{\delta}^{13}C_{measured}-0.624$, $r^2=0.98$) between the calculated and measured ${\delta}^{13}C$. Calibration of ${\delta}^{13}C$ using the relationship between the calculated and the measured ${\delta}^{13}C$ values produced reliable and accurate ${\delta}^{13}C$ values. CONCLUSION: Our results suggest that the drying method is more accurate pre-treatment method to minimize the influence of air $CO_2$ compared to the precipitation method for the determination of ${\delta}^{13}C$ of DOC.

• Journal of Life Science
• /
• v.20 no.3
• /
• pp.437-443
• /
• 2010

This study was designed to examine the aerobic capacity and ventilatory response during an incremental exercise in elite high school cyclists. Twelve boys ($17{\pm}1\;yr$, $175{\pm}5\;cm$, $70{\pm}9\;kg$) participated in anthropometric measurements, incremental exercise testing, and pulmonary function tests. During incremental exercise testing using a cycle ergometer, their maximal oxygen uptake ($VO_2max$), maximal power output, ventilation, ventilatory equivalents for oxygen ($V_E/VO_2$) and carbon dioxide ($V_E/VCO_2$), respiratory rate, and tidal volume were measured. Time variables such as inspiratory time (Ti), expiratory time (Te), breathing time (Tb), and inspiratory duty cycle (Ti/Tb), as well as inspiratory flow rate ($V_T$/Ti) were assessed. Pulmonary function of vital capacity (FVC), forced expiratory volume in one second ($FEV_1$), $FEV_1$/FVC, and peak expiratory flow were evaluated. Their $VO_2max$, maximal heart rate, and Wmax were $57.5{\pm}3.9\;ml{\cdot}kg^{-1}{\cdot}min^{-1}$, $194.1{\pm}8.6\;beat{\cdot}min^{-1}$, and 452 W, respectively. $VO_2max$ was not related to any anthropometric parameters. Most ventilatory variables progressively increased with exercise intensity. As intensity increased, Ti, Tb, Tb decreased while Ti/Tb was maintained. Below an intensity of 250 W, height, weight, body mass index, and body surface were highly correlated with $V_T$/Ti and Ti/Tb (p<0.05). Collectively, $VO_2max$ appeared to be lower than adult cyclists, suggesting a different pattern of ventilatory control as age advances. Morphological characteristics were not related to $VO_2max$ in the population. Time variables of ventilatory response seemed to be related only at an exercise intensity level of less than 250 W. $V_T$/Ti may be related to exercise endurance capacity, but Ti/Tb was similar to adult cyclists.