• Electronics and Telecommunications Trends
• /
• v.14 no.2 s.56
• /
• pp.14-25
• /
• 1999

정보화지표는 정보화의 진전에 따라 국가 전체 또는 어느 한 부분의 정보화 수준을 측정하여 함축적인 지수로 나타나게 해주며, 그 활용이 매우 편리하여 널리 이용되는 분석방법 중의 하나이다. 정보화지표의 설정모형에 따라 국가 정보화 수준에 대한 분석결과는 달라질 수 있으며 이에 따른 정책의 결정도 변화될 수 있어, 합리적인 정보화지표의 설정은 그만큼 중요하다고 하겠다. 본 연구는 국가 정보화 수준을 정확하게 측정하기 위한 효율적이고 현실에 부합된 지표를 개발하는 것을 목적으로 최근 정보화 진전 및 변화된 환경을 고려하여 정보화지표의 개념을 정립하였다. 그리고 이를 기준으로 정보화지표 체계를 확립하고 측정항목별 지표를 설정하였다. 본 연구는 먼저 세 가지 지표, 즉 정보화설비지표, 정보화이용지표, 그리고 정보화지원지표를 설정하고 이를 보다 효율적으로 비교 분석이 가능하도록 6개 그룹으로 세분화하였다. 즉, 정보기반구조, 정보통신기기산업, 기초정보이용, 고도정보이용, 정보화 연구개발투자, 정보인력지표로 세분화하여 각 부문의 정보화 수준을 고려할 수 있도록 하였다. 또한 각 그룹별로 현실성 및 실제 적용가능성 측면을 고려하여 총 28개의 정보화측정지표를 설정하였다.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.247-254
• /
• 2003

The lightness of components required in automobile and machinery industry is requiring high strength of components. In particular manufacturing process and new materials development for solving the fatigue fracture problem attendant upon high strength of suspension of automobile are actively advanced. In this paper, the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in high temperatures($100^{\circ}$, $150^{\circ}$, $180^{\circ}$) was investigated with considering fracture mechanics. So, we can obtain followings. (1)Compressive residual stress decreases in high temperature, that is, with increasing temperature. (2)The effect of compressive residual stress on fatigue crack growth behavior in high temperature increases below ${\Delta}K=17{\sim}19MPa$ (3)It was investigated by SEM that the constraint of compress residual stress for plastic zone of fatigue crack tip was decreased in high temperature as compared with room temperature.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1495-1498
• /
• 2003

Recently, self-healing methods of a cracked matrix, especially polymeric composite materials, became the center of engineering researchers. In this paper, we summarized the self-healing concept for polymeric composite materials and investigated the effect of microparticle on the crack growth behavior in colorless and transparent matrix by experimental observation to describe the crack propagation around the microparticle inside epoxy matrix composite. Compression splitting test for the specimen involving microparticle was conducted. In addition, FE analysis was pursued to present the stress contour around microparticle in the matrix. Through the experiments and FE analysis, we found that the size. relative position, bonding condition and relative stiffness of microparticle are important parameters to decide the direction of crack propagation, which is related to the rupture of microparticle for self-healing

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.164-172
• /
• 1996

In hard and brittle materials as advanced ceramics indented by a hard indenter, the indenter's transition radius, was defined as critical radius which distinguishes the occurrence of the first plastic deformation from the elastic cracking as the first damaging event, is analytically and experimentally investigated. The analytical result is shown that the critical load, which not enlarge pre-existing cracks as the form of median crack beneath a indenter, is constant, and is determined by the order of $k_{IC}$$^{4}$ $P_{Y}$$^{3}$(where, $K_{IC}$ , $P_{Y}$are the fracture toughness of materials and the applied pressure by indenting, respectively). And the size of transiton radii were experimentally obtained with the similar values to the analytical results.lts..

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.20-25
• /
• 2000

lh deleterious Cr, Mo rich -$\sigma$phase is a hard embrittling precipitate, which forms between MU)-900 $^{\circ}C$, often associated with a reduction in both impact properties and corrosion reshame. On this study, After aging at MU) "C, fatigue crack propagation induced by a phase precipitation was evaluated and time-frequency analysis of acoustic emission was conducted It was possible to find fracture mechanism by a phase precipitation due to time-frequency anulysis of acoustic emission signals.nals.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.31-33
• /
• 2008

산업사회에서의 전력공급 계통은 설비고장이 발생할 경우 해당지역에 국한되어 정전이 발생하기 때문에 피해가 확산되거나 사회적인 이슈가 되지는 않았다. 광케이블을 이용한 정보통신사회가 구축되어 금융과 언론을 비롯한 대부분의 생활이 인터넷을 중심으로 진행되고 있고 향후 지식기반 사회로의 진전이 급속히 진전될 것에 대비하여 전력계통 설비와 운영 방법의 고도화가 필요하게 되었다. 전력IT는 현재의 전력설비와 네트워크, IT를 이용하여 더욱 심층적인 연구가 진행되고 있으며 본 논문에서는 전력IT 연구과제 결과물의 활용성을 높이고 기술개발 과정에서의 시행착오를 최소화하기 위해 총 10개 과제를 하나로 운영할 경우를 상정하여 연구에 필요한 기술체계 모형을 개발하였고 이 모형을 토대로 향후 분산형 전원을 포함한 전력계통의 최적운영과 고장예측기법을 이용한 설비관리로 정전을 예방하여 최고품질의 전력을 공급하는데 기여하고자 하였다. 이 논문은 전력IT의 도입배경과 현재까지의 연구 성과분석을 토대로 실 계통 검증 5단계와 기술체계 모형 그리고 통합운영시스템 개념도 제시 순으로 작성하였다.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.13-18
• /
• 2009

In this study, an equivalent unit load methodology has been presented to simplify the fatigue analysis procedure. And fuselage structure fatigue life has been evaluated based on equivalent unit load. Finite element analysis has been carried out to analyze the stress intensity factor and geometrical correction factor that is needed for crack growth analysis. And strain energy density factor is used to predict the initial direction of crack propagation.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.236-241
• /
• 2000

In this paper, transparent dynamic photoelastic experimental hybrid method for propagating cracks in orthotropic material is developed. Using transparent dynamic photoelastic experimental hybrid method, we can obtain stress intensity factor and separate the stress components from only isochromatic fringe patterns without using isoclinics. It is certified that the dynamic photoelastic experimental hybrid method is very useful for the problems of the dynamic tincture mechanics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.707-719
• /
• 2009

The variables relating to the fatigue behavior have uncertainty and are random. The fatigue crack propagation is, thus, stochastic in nature. In this study, fatigue experiments are performed on the specimen of the magnesium alloy AZ31. The data of the fatigue life are scattered even in the same experimental condition. It is necessary to determine the probability distribution of the fatigue crack propagation life for the reliability analysis as well as the design and maintenance of structural components. Therefore the statistics and the probability distribution for the fatigue crack propagation life are investigated and the best fit probability distribution of that is proposed in this paper.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.333-337
• /
• 2008

This study investigates crack propagation behavior of Sn-3.0Ag-0.5Cu solder under pull-push loading conditions. Fatigue Crack Growth (FCG) tests were conducted on Center Cracked Plate (CCP) specimens in fast-fast (pp) strain waveform. The fast-slow (pc), slow-fast (cp) and slow-slow (cc) strain waveforms were also used to study the effect of strain rates. The crack propagation rates for the four strain waveforms were correlated with J-integral range and a scatter band of factor 4 was found. The crack growth rates for the pc waveform was highest, followed by cp, cc and then pp waveforms.