• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.45-52
• /
• 2020

An open-spandrel arch bridges, which consists of slab deck, arch rib, and vertical members, shows a various level of moment and axial forces according to the supporting boundary condition of arch rib and vehicle speeds. Also, the definition of impact factor accepts any kind of response parameters, not only displacement response at slab deck. The present study considers concrete open-spandrel arch bridges constrained with fixed conditions at the ends of arch rib and investigates the impact factor variation due to moving load speeds, response parameters, measuring locations, and vertical member spacing ratio of the bridges. The results of Reference model show that the impact factor is biggest when the reactive moment resulted at the vehicle-inducing opposite end of the arch rib is applied. The peak impact factor is a similar level obtained for the middle of the span adjacent to the slab deck center, but it is 19% higher than the peak impact factor calculated using the axial force developed at the same location. Reducing the spacing ratio of the vertical members as half as the reference model whose ratio is 1/9.375 produces a similar level of the moment-based peak impact factor compared to the reference model. However, when the spacing ratio is doubled, the peak impact factor is 4.4 times greater than the reference model.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.47-58
• /
• 2002

This thesis is based on the speed variations which are observed both in a sing1e tunnel and a continuous tunnel. Kumdae II tunnel and Chiak I tunnel of Jungang Expressway are selected in order to analyze the characteristics of speed variations according to tunnel intervals I place importance on the computation of tunnel intervals according to the speed variations. there's a summary of the results. The results of the study reveal that speed changes occur both on 1km ahead of tunnel and within the tunnel. The speed change amounts to 7.1km/hr(6.7%) on these survey Points 2.7km/hr (2.9%) on access points, and from -3.6km/hr (-3.8%) to, +4.1km/hr(+4.7%) irregularly on egress points. The magnitude of speed chance appears small on the survey points where an interval of tunnel is short whereas the speed chance turn out to be rather significant on the points where the tunnel interval is long. The analysis of tunnel distances using multiple regression models shows that the appropriate tunnel distance turns out to be 732m. The distance of 732m seem to be providing a fecundation for uniform traffic flow in continuous tunnel conditions.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.81-85
• /
• 1994

This experiment was carried out to investigate the fertilization and the size of mature female and male gametophytic parts of Pulsatilla koreana after artificial pollination. The size of pollen is $26.5{\mu}m$ at the time of anther dehiscence, that is, about $3{\sim}4$ days after pollination. Synergid nucleus, egg nucleus, and polar nucleus are 10.0, 15.0, and $32.5{\mu}m$ respectively at the time of completing egg apparatus formation, that is, about 2 days after pollination. Poller tubes germinate on stigma about 10 hours, passing lower part of style about 30 hours, penetrating into micropyle about 35 hours after pollination. Sperm nucleus penetrates into polar nucleus about 40 hours and egg cell about 48 hours after pollination. But, there seems to be different among the individuals. Multinuclei and multinucleoli are formed in egg cell, synergid, and polar nucleus about the time of fertilization. Proembryo is formed about 4 days, being changed to large globular form about $6{\sim}8$ days after pollination. Endosperm nuclei divide into free nuclei after fertilization and change to cotyledon in gymnosperm. There seems to be same phenomena in Pulsatilla koreana.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.870-874
• /
• 2018

In the worst maritime accidents, people should abandon ship, but ship structures are narrow and complex and operation takes place on rough seas, so escape is not easy. In particular, passengers on cruise ships are untrained and varied, making evacuation prospects worse. In such a case, the evacuation management of the crew plays a very important role. If a rescuer enters a ship at distress and conducts rescue activities, which zones represent the most effective entry should be examined. Generally, crew and rescuers take the shortest route, but if an accident occurs along the shortest route, it is necessary to select the second-best alternative. To solve this situation, this study aims to calculate evacuation routes using Q-Learning of Reinforcement Learning, which is a machine learning technique. Reinforcement learning is one of the most important functions of artificial intelligence and is currently used in many fields. Most evacuation analysis programs developed so far use the shortest path search method. For this reason, this study explored optimal paths using reinforcement learning. In the future, machine learning techniques will be applicable to various marine-related industries for such purposes as the selection of optimal routes for autonomous vessels and risk avoidance.

• Journal of Practical Engineering Education
• /
• v.16 no.3_spc
• /
• pp.391-399
• /
• 2024

All highway toll gates in Korea use low-speed WIM(Weight-In-Motion) to block overloaded cargo vehicles from entering the main highway, but some cargo vehicle owners are illegally modifying vehicles to operate variable axles and evading crackdowns by manipulating the axles. In previous studies detect all tires of a running vehicle were detected to determine whether there is axle manipulation. However, because the vehicle entry area at the highway toll gate checkpoint is very narrow, there is a problem that it is realistically difficult to film all tires of the entering vehicle in one video frame. In this paper, we proposed a system that can determine whether the axle is being operated through changes in the height of the vehicle's cargo box rather than by detecting tires. To detect changes in the height of a cargo box, we propose a method to extract the representative line of the cargo box using Hough transform and then measure the change in height of the representative line to detect the change in height of the cargo box. In addition, we propose a method to detect changes in the vertical height of a cargo box by accumulating motion vectors of pixels within a certain area of the image using optical flow. And the two methods were compared and their advantages and disadvantages were analyzed and presented.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.64-74
• /
• 2018

Small high-resolution Earth observation satellites require precise optical alignment at the submicron level. However, misalignments can occur due to the influence of external factors during the launch and operation despite the sufficient alignment processes that take place before the launch. Thus, satellites need to realign their optical elements in orbit in what is known as a refocusing process to compensate for any misalignments. Refocusing algorithms developed for satellites have only considered de-space, which is the most sensitive factor with respect to image quality. However, the existing algorithms can cause correction error when inner and external forces generate tilt amount in an optical system. The present work suggests an improved online refocusing algorithm by considering the tilting effect for application in the case of a de-spaced and tilted optical system. In addition, the algorithm is considered to be efficient in terms of time and cost because it is designed to be used as an online method that does not require ground communication.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.127-136
• /
• 2007

It is easy to install and maintain a mobile multi-hop wireless network due to its self-organizing characteristics. However it has security weakness of the authentication of mobile multi-hop relay stations. Specially, the mobile multi-hop relay network in the IEEE 802.16j has the additional security weakness caused by the requirement of backward compatibility for mobile stations of the conventional IEEE 802.16 system. In this paper, we propose a novel mutual authentication scheme applicable to IEEE 802.16j-based mobile multi-hop relay network architecture. The scheme is able to resolve the initial trust gain problem of a multi-hop node at its entry to the network, the problem of rogue mobile multi-hop node and the problem of hop-by-hop authentication between multi-hop nodes. Effectively, the scheme is a hybrid scheme of the distributed authentication method and the centralized authentication method which have been considered to be deployed in the wireless ad-hoc network and the wireless network connected to wired authentication servers, respectively. Also, we analyze the effectiveness of the proposed hybrid authentication method.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.287-294
• /
• 2003

There are a lot of curved subway stations in Seoul metropolitan area. These must be straightly constructed as many as possible. But some of stations are roundly designed and built in order to avoid pre-existed underground obstacle such as basement of high rise building, underground gas or water pipe line and subway stations from another line. As shown fig 1, one of the biggest problem occurring curved subway station is considered large gap between platform and vehicle when vehicle completely stop at the station. The gap potentially is in existence to subway passenger as very dangerous factors in rush hours. If passenger accidentally drop their food or leg between this gap when they get on the train and train leaves station, the passenger will be seriously injured by vehicle. In this paper, various design and instruments are introduced and best solution for this matter will be presented. In order to eliminate any possibility of accident happened gap between platform and vehicle, KRRI(Korea Railroad Research Institute) have been developed new safety instrument. These technologies were applied for patent by KRRI. These mechanisms will provide confidence as well as safety to Korean subway passenger

• Journal of KIISE:Software and Applications
• /
• v.28 no.3
• /
• pp.224-238
• /
• 2001

본 논문은 ATM(Abstract Timed Machine)으로 명세된 실시간 시스템을 검증하기 위한 방법을 기술한다. ATM은 임무 위급 시스템인 실시간 시스템을 명세, 분석, 검증하기 위한 정형기법이다. ATM은 모드와 전이, 포트로 구성되어 있으며 모드는 머신의 압축된 상태를 표현한다. 전이는 하나의 모드에서 다른 모드로의 전환을 나타내며 조건과 이벤트로 구성되어 있다. 포트는 ATM간의 상호작용을 위한 진입을 표현한다. 다른 정형기법과 비교하여 ATM은 소프트웨어의 순환공학 과정에서 사용하기 위해 설계되었다. 역공학 측면에서 볼 때 ATM은 계산 논리뿐만 아니라 실시간 시스템의 실제 소스코드에 있는 설계나 환경정보를 표현할 수 있다. 이러한 목적을 위해 ATM의 모드는 계산모드, 추상화 모드, 주제모드로 구분된다. 계산 모드는 코드 상에서의 논리와 계산을 나타내며 추상화 모드는 모드와 전이의 블록을 하나의 ATM으로써 표현한다. 대개의 경우, 이것은 코드 상에서의 블록을 ATM내 하나의 모드로 나타낼 때 사용한다. 주제 모드는 예외나 주기적 동작 등과 같은 다수의 ATM의 주제를 표현한다. 실시간 시스템을 검증하기 위해 시스템의 소스 코드는 역명세 과정을 통하여 ATM으로 표현된다. 검증은 ATM에 대한 도달성 그래프를 생성하는 것에 의해 수행된다. 도달성 그래프는 상태와 시간을 추상화되고 압축된 형태로 표현할 수 있으며 그 결과 시간 속성을 지닌 상태 공간을 감소시킬 수 있다. 또한 시스템의 교착상태를 쉽게 발견할 수 있다. 본 논문은 ATM과 실행 모델, 도달성 그래프, 검증을 위한 속성 등을 기술하며 이들을 다른 정형 방법들과 예제를 통하여 비교한다.수 있다. 모피우스는 헤더나 광고와 같은 불필요한 정보들을 제거하는 별도의 단계를 거치지 않으므로 wrapper를 빠르게 생성한다. 궁극적으로 모피우스는 새로운 웹 상점을 사용자가 자유롭게 추가, 삭제할 수 있는 환경을 제공한다.X>와 반응시킬 경우에는 반응식 c에 의거 진행됨을 예측할 수 있었다.의거 진행됨을 예측할 수 있었다.이 거의 산화되지 않았고, $700^{\circ}C$에서도 ZnS와 ZnO 상이 공존한 것으로 보아 SnO$_2$코팅이 ZnS의 산화를 억제하는 것으로 나타났다.pplied not only to the strike system in the RSC circle, but also to the logistics system in the SLC circle. Thus, the RSLC model can maximize combat synergy effects by integrating the RSC and the SLC. With a similar logic, this paper develops "A Revised System of Systems with Logistics (RSSL)" which combines "A New system of Systems" and logistics. These tow models proposed here help explain several issues such as logistics environment in future warfare, MOE(Measure of Effectiveness( on logistics performance, and COA(Course of Actions)

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.1
• /
• pp.33-38
• /
• 2019

Thermal power generation accounts for the highest percentage of domestic power generation, among which coal-fired boiler generation accounts for the highest percentage. Coal boilers generate harmful substances and fine dust during coal combustion and have a serious effect on air pollution. So, fluidized-bed boilers have been introduced as eco-friendly coal boilers. It uses a fluid medium which affect the combustion temperature of coal. Because of it fluidized-bed boilers emit less pollutants than original one. Water-wall tubes play an important role in this fluidized bed boiler. Due to the fluid medium, the wall damage is more severe than the existing boiler. However, there is no quantitative maintenance technique in Korea yet. Remote field eddy current testing is a non-destructive evaluation technique that is often used for inspection of inner and outer wall of tube. it can inspect with non-contact and high speed. However, it is an inspection that proceeds from inside the pipe, and the water-wall tube is not able to enter the interior. In this study, we designed and simulated an external remote field eddy current sensor suitable for water-wall tube of a fluidized - bed boiler using simulations. By obtaining a signal similar to the existing remote field eddy current test, the criteria for the external remote field eddy current sensor design can be presented.