• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.339-344
• /
• 2011

In the past much effort has been made to utilize advanced computational fluid dynamic (CFD) programs for aeroelastic simulations and analysis. However, it is limited in the field of unsteady aeroelasticity due to enormous size of computer memory and unreasonably long CPU time. Recently, AAEMS(Aerodynamics is Aeroelasticity minus Structure) was developed for linear time-invariant, coupled fluid-structure systems. In this paper, to demonstrate further the efficiency and accuracy of the new model reduction method, we successfully examine AGARD 445.6 wing modeled by FLUENT CFD, FSIPRO3D and NASTRAN FEM(Finite Element Method) programs. Using the ROM(Reduced Order Modeling) one can predict flutter boundary as a function of the dynamic pressure.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.135-141
• /
• 2003

For the analysis of machined surface topography and machine-tool chatter, the cutting system is considered to be a single degree of freedom system. This paper presents a modeling method of equivalent vibratory system for precision cutting in end-milling using an impact test, an Autoregressive Moving Average (ARMA) mode] and a bisection method It has been shown that the proposed modeling method provides a good identification of the cutting system. The advantages of the proposed method in comparison to the existing method are that it is very easy and accurate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.330-331
• /
• 2014

A mathematical model is suggested for diagnosis on a reciprocating pump. To the end, kinematic, thermodynamic and fluidic analyses are carried out for a simplified reciprocating pump model. The pressure inside the cylinder is expressed as a function of the rotation angle of a crank axle. The mathematical model consists of one cylinder with suction and discharge valves and an accumulator. The effect of valve leakage on the discharge angle is investigated. The discharge angle difference between normal state and leakage state increases with the leakage extent.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.243-245
• /
• 2018

발사체 및 인공위성에서 발사시부터 우주까지 도달하는데 다양한 환경이 주어진다. 본 논문에서는 발사체의 단분리 및 페어링 분리시 생기는 충격 환경과 대기가 발사체 표면에 충돌하여 생기는 진동 환경에 대한 배터리 내부 변화를 분석한다. 환경시험을 반영한 전기적 모델링을 설계하고 전기적 파라미터를 기반으로 배터리 열해석과 실제 배터리팩 내부 열을 측정하여 비교 및 분석한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.477-482
• /
• 2003

A nonlinear modeling method for an axially oscillating cantilever beam with a concentrated mass is presented in this paper. Hybrid deformation variables are employed fur the modeling method with which frequency response characteristics of axially oscillating cantilever beams are investigated. The geometric nonlinear effects of stretching and curvature are considered to accurately predict the frequency response characteristics of the oscillating cantilever beam. The effects of the magnitude and the location on the concentrated mass on the frequency characteristics are investigated. It is found that the dynamic instability is significantly influenced by the two parameters.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.809-813
• /
• 2010

열음향학적 불안정성의 동역학적 저차 모델링 기법 개발을 위해 전기적으로 가열되는 Rijke 튜브 실험 장치를 구성하고, 불안정성으로 인해 발생되는 튜브 내의 압력 진동을 측정하였다. 측정된 데이터로부터 압력 신호의 주파수 스펙트럼을 분석한 결과 3개의 주요한 진동모드를 관측할 수 있었으며 특히 첫 번째 모드 주파수는 단순한 열음향학적 해석 결과와도 거의 일치하는 것을 확인하였다. 이러한 실험 자료와 데이터 분석을 바탕으로 추후 열음향학적 불안정현상의 저차 모델링을 수행할 예정이다.

• 한국소음진동공학회논문집
• /
• 제23권11호
• /
• pp.1020-1026
• /
• 2013

An accurate railway environmental noise prediction model is required to make the proper solution of the railway noise problems. In this paper, an engineering model for predicting the noise of conventional passenger cars is presented considering the acoustic source strength in octave-band frequencies and the propagation over grounds with varying surface properties. Since the formation of a train can be variable, the source strength of each locomotive and passenger car was estimated by measuring the pass-by noise and analysing the wheel-rail rolling noise. Some validation cases show on the average small differences between the predictions of the present model and the measurement results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.536-539
• /
• 2009

BIRDI(Bridge Inspection Robot Development Interface)에서 현재 개발된 첨단굴절로봇차는 비전 시스템과 로봇 플랫폼을 붐에 장착하여 교량 하부를 점검하는 점검용차량이다. 본 연구에서는 첨단굴절로봇차의 포스트 붐에 엑츄에이터를 장착하여 강풍 등으로 발생이 예상되는 유해 진동을 제어할 수 있는 시스템을 제안하였으며, 성능 평가를 위해 수치적 연구를 수행하였다. 제안된 제어시스템의 수치적 연구를 위해 현재 제작된 포스트 붐과 작업 붐의 제원을 이용하여 모델링 하였으며, 적절한 주파수 특성을 가진 하중을 가정하였으며, 최적 제어이론인 PD제어기법인 피드백 제어기법을 적용하여 수치해석을 수행 하였다. 수치해석 결과, 제안된 제어시스템은 L형 붐에 발생되는 유해 진동을 저감시킴을 확인하였다. 본 연구를 통해 제안된 시스템의 진동제어 성능을 입증하였으며, 실제 첨단굴절로봇차에 적용될 경우 점검 시스템의 성능을 향상시킬 수 있을 것으로 사료된다.

• 소음진동
• /
• 제10권2호
• /
• pp.312-318
• /
• 2000

A modeling method for the vibration analysis of rotating cantilever plastes with stiffeners is presented. The equations of motion for the plates aer derived and trnasformed into a dimensionless form. A mass density Dirac's delta function is used to idealize the stiffener mathematically. The effects of stiffeners on the model characteristics of the plate are investigated, and mode shape variations due to some parameter variation are exhibited. It is found that veering phenomena occur between some loci and associated mode shapes change significantly during the veering phenomena.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.74-80
• /
• 2011

Front-back vibrations of high-speed elevator need to be suppressed as in the case of lateral vibrations. The dynamic model for the front-back vibrations is different from the lateral vibration model since the supporting structure varies. In this study, a dynamic model was derived using the energy method. Based on the free vibration analysis, it was observed that the fundamental frequency for the front-back vibration is slightly lower than the fundamental frequency of the lateral vibration, which means that the active vibration control should be carried out in both directions. The PPF control algorithm was applied to the numerical model under measured rail irregularities. The numerical results show that the active vibration control of elevator front-back vibration is also possible.