• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.61-61
• /
• 2004

벨로우즈는 차량의 배기계나 공장의 덕트 등에 진동 절연을 목적으로 장착되는 부품으로서 제품의 특성상 진동 하중을 많이 받기 때문에 여러 겹으로 설계하는 경우가 많다 또한, 대부분의 제품이 그러하듯이 유한요소해석을 적용하여 제품의 특성을 조기에 평가함으로써 개발의 효율성을 높일 수 있다. 그러나, 여러 겹으로 되어있는 제품의 특성을 그대로 모델링 하였을 때는 유한요소의 수가 지나치게 증가하는 경향이 있기 때문에 해석을 수행하기 어렵다.(중략)

• Journal of Korean Society of Steel Construction
• /
• v.12 no.4 s.47
• /
• pp.363-374
• /
• 2000

An accurate method is presented for vibrations of rhombic plates having three different combinations of clamped, simply supported, and free edge conditions. A specific feature here is that the analysis explicitly considers the moment singularities that occur in the two opposite corners having obtuse angles of the rhombic plates. Stationary conditions of single-field Lagrangian functional are derived using the Ritz method. Convergence studies of frequencies show that the corner functions accelerate the convergence rate of solutions. In this paper, accurate frequencies and normalized contours of the vibratory transverse displacement are presented for highly skewed rhombic plates, so that a significant effect of corner stress singularities nay be understood.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.81-89
• /
• 1997

The structural stress and vibration analysis of the rotary screen are investigated. The mechanical properties of the rotary screen, this is, Young's modulus and density of nickel alloy are determined experimentally. The natural vibration characteristics of the rotary screen are evaluated and the displacement, the stress of the rotary screen under the various load conditions are also examined. The radial displacement of the rotary screen is obtained by experiment under various rotating speeds.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.220-225
• /
• 2007

Free vibration analysis using the method of NDIF (non-dimensional dynamic influence function), which was developed by the author, is extended to arbitrarily shaped polygonal plates with free edges. Local Cartesian coordinate systems are employed to apply the free boundary condition to nodes distributed along the edges of the plate of interest. Furthermore, a new way for applying the free boundary condition to nodes located at corners of the plate is for the first time introduced by considering the phenomenon of stress concentration at the corners. Two case studies show that the proposed method is valid and accurate when the eigenvalues by the proposed method are compared to those by FEM(ANSYS).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.130-131
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.323-324
• /
• 2011

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.17-22
• /
• 1993

본 연구에서는 진동시 아치미소요소에 발생하는 합응력과 관성력의 동적평 형방정식을 이용하여 불연속 변화단면을 갖는 변화곡률 아치의 자유진동을 지배하는 미분방정식을 유도하고, 이를 해석하여 불연속 변화단면을 갖는 포 물선 아치의 자유진동을 해석하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.4
• /
• pp.308-314
• /
• 2013

The vibration and stress analysis program of comprehensive vibration assessment program(CVAP) is to theoretically verify the structural integrity of reactor vessel internals(RVI) and to provide the basis for selecting the locations monitored in measurement and inspection programs. This paper covers the applicability of the vibration and stress analysis method of APR1400 RVI CVAP. The analysis method was developed to use 3-dimensional detail hydraulic and structural models with ANSYS and CFX. To assess the method, the hydraulic loads and structural reponses of OPR1000 were predicted and compared with the measured data in the OPR1000 RVI CVAP. The results predicted with this method were close to the measured values considerably. Therefore, the analysis method was developed properly.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.381-387
• /
• 2016

In this paper, the methodology applied to the improvement of stress analyses is extended to free vibration and buckling analyses. The essence of the methodology is the Saint-Venant's principle that is applicable to beam and plate models. The principle allows one to dimensionally reduce three-dimensional elasticity problems. Thus the methodology can be employed to vibration and buckling as well as stress analysis. First, the principle is briefly revisited, and then the formations of classical beam theories are presented. To improve the predictions, the perturbed terms (unknowns) are introduced together with the warping functions that are calculated by stress equilibrium equations. The unknowns are then calculated by applying the equivalence of stress resultants (i.e., Saint-Venant's principle). As numerical examples, cantilever and simply supported beams are analytically solved. The results obtained are compared with those of the classical beam theories. It is shown that the methodology can be used to improve the predictions without introducing shear correction factors.

• Journal of Aerospace System Engineering
• /
• v.12 no.1
• /
• pp.47-56
• /
• 2018

In this paper, the structural analysis of the Geostationary Korea Multi-Purpose Satellite-2 (GEO-KOMPSAT-2) tubing system is discussed, and the structural integrity of the tubing system is assessed by comparative analysis with the results of overseas partner AIRBUS. Securing structural reliability of the tubing system is a very important key element of the propulsion system of the GEO-KOMPSAT-2 satellite. Therefore, FE modeling of the propulsion tubing was carried out directly using the CAE program, and structural analysis was performed to evaluate the stress state under launch conditions. Hoop stress, axial stress, bending stress, and torsion stress were calculated according to diverse load conditions by using pressure stress analysis, thruster alignment analysis, sine qualification load analysis, and random qualification load analysis. From the results, the Margin of Safety (MoS) of the tubing system is evaluated, and we can verify the structural integrity of the tubing system when subjected to various launch loads.