• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.63-63
• /
• 2004

기계류는 대개 부정형의 형상을 지니고 있으며, 또 표면이 모두 연결되어 있으므로, 진동하는 물체 표면상에서의 소음원 특성을 세밀히 파악하는 일은 매우 어려운 일이다. 음향 인텐시티나 공간 푸리에 변환을 이용하는 홀로그래피 기법 등의 어레이 마이크에 의한 기법들이 제안되었고 또 활용되고 있으나, 이는 어디까지나 음원에서 가까운 음장을 가상적인 음원면이라 보고 재구성하는 것이어서 실제 음원의 특성을 파악하는데 어려움이 있다. 이러한 문제점을 해결하기 위해 음원표면을 경계요소화 모델링을 하고, 어레이 마이크로 측정될 음장의 지점과 표면간의 관계를 수학적으로 정리한 후, 마이크에서 측정된 신호를 이용해 역으로 경계요소해석 계산을 수행하여 음원 특성을 파악하는 기법이 제안되었다. 본 발표에 있어서는 이와 같은 취지에서 ‘개발된 Inverse BEM을 이용한 NAH 기법’에 관한 개괄적인 내용을 설명하고, 그 적용 가능성 및 이 기법의 미래에 대해 설명하며, 다음과 같은 내용의 순서대로 설명된다: $\textbullet$ 각종 음원 파악 기법들의 특성과 이 방법이 필요한 이유 $\textbullet$일반 음향 holography 기법 (STSF)과의 차이점 $\textbullet$ 이론적 배경 개괄 $\textbullet$ 실제 적용 순서에 따른 방법의 설명 $\textbullet$ 후처리 결과물 $\textbullet$ 본 기법의 향후 과제 및 적용 방법의 개선

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.949-954
• /
• 2000

Applicability of the vibration signal phase for predicting the modal damping properties of structures is investigated. For uniform plates with different internal damping levels, the phase delay as a function of the frequency span as well as a function of the distance between the excitation and response measurement points are experimentally obtained. Dependence of the phase characteristics on the amount of structural damping is elucidated -more heavily damped plate shows notably reduced phase delay at intermediate distances. The experimental results compare favorably with analytical predictions, and show much promise for further refinement as a tool for estimating structural properties.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.27-31
• /
• 1996

연사기는 장섬유가 천연섬유와 유사한 섬유의 성질을 갖도록 하거나 면사, 모사 등의 단섬유사의 인장강도를 높여주기 위해서 실을 꼬아주는 기계를 가리키며 여러 가지의 연사기 가운데 생산성이 높은 2-for-1 연사기가 널리 사용되고 있다. 2-for-1 연사기는 고정된 급사 보빈과 이것을 관통하는 중공스핀들, 실이 통과하는 구멍(yarn guide)을 가진 디스크와 실을 감는 장치등으로 구성되어 있다. 고정된 보빈에서 풀려 나온 실이 스핀들을 거쳐 회전하는 yarn guide를 통과하면서 실이 한 번 꼬이고 yarn guide를 빠져나온 실이 감기면서 다시 꼬이므로 1회전당 2회 꼬이게 되어 2-for-1이라는 이름이 붙여졌다[1]. 2-for-1연사기의 스핀들은 대개 10,000-15,000rpm으로 회전하며 고속으로 올라갈수록 생산성이 증대되기 때문에 고속화를 위한 노력이 계속되고 있으나 고속화를 가로막는 중요한 애로기술의 하나가 소음, 진동저감기술이다. 본 연구에서는 스핀들 32개짜리로 특별제작된 2-for-1 연사기에서 가장 중요한 소음으로 인식되고 있는 스핀들 소음의 소음원인을 규명하고자 하였다. 소음원인의 분석에는 다중입력/단일출력(MISO)모형을 이용한 신호 해석법을 사용하였다.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.843-850
• /
• 2010

The dynamic modulus of elasticity of concrete can be determined nondestructively using impact echo test as prescribed in KS F 2437. The fundamental longitudinal frequency of the concrete cylinders with free-free boundary condition was estimated by the wavelet transform theory. The advantage of the wavelet transform over either a pure spectral or temporal decomposition of the signal is that the features of the pertinent signals can be characterized in the time-frequency plane. For the concrete mix design utilized in this study, no significant difference between the dynamic and the static moduli of elasticity was observed. This was contrary to the perceived general notion of having the dynamic modulus considerably higher than the static modulus. It has been shown that the modulus from static and dynamic by impact echo test are comparable to each other fairly well, when the effect of strain level was properly taken into account. In this experimental test, it was shown that the dynamic modulus is approximately equal to the tangent modulus at $1{\times}10^{-4}$ strain level.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.101-107
• /
• 2014

Damage location and extent of structure could be detected by the inverse analysis on dynamic response properties such as frequencies and mode shapes. The dynamic response of building structures has many noise and affected by nonstructural members and, above all, the behavior of building structure is more complex than civil structure and this makes the damage detection difficult. In recent researches the damage is detected by the indirect index such as sensitivity or assumed values. However, for the more reasonable damage detection, it needs to use the damage index directly induced from dynamic equation. The purpose of this study is to provide the damage detection method on shear building structures by the damage index directly induced from dynamic equation. The provided damage index could be estimated from measured mode shape of undamaged structure and frequency difference between undamaged and damaged structure. The damage detection method is applied to numerical analysis model such as MATLAB and MIDAS GENw for the verification. The damage index at damaged story represents (-) sign and 15 times than other undamaged sories.

• Journal of Sensor Science and Technology
• /
• v.11 no.3
• /
• pp.171-182
• /
• 2002

The differential electromagnetic transducer for IME(implantable middle ear) system, which have two small permanent magnets glued with the same pole facing each other in the coil, has high vibration efficiency and does not influenced by external magnetic field. In this paper, using finite element method, highly efficient structure of the transducer was proposed and vibration force of the transducer was calculated by electromagnetic theory. And the necessary vibration force of transducer to transmit the sound signal to inner ear when the transducer is attached at stapes was calculated and the design parameters of the transducer were investigated. Using the parameters, the differential electromagnetic transducer was manufactured in small size to implant in confined human middle ear. And it was examined by unloaded and loaded vibration experiment using temporal bone sampled from cadaver.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.829-833
• /
• 2007

In this paper, the RCF method is applied to analyze small signal stability of power systems including GTO controlled parallel FACTS equipments such as STATCOM. To apply the RCF method in power system small signal stability problems, state transition equations of generator, controllers and STATCOM are presented. In eigenvalue analysis of power systems, STATCOM is modelled as the equivalents voltage source model and the PWM switching circuit model. As a result of simulation, the RCF method is very powerful to calculate the oscillation modes exactly after the switching operations, and useful to analyze the small signal stability of power systems with periodically operated switching devices such as STATCOM.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.1
• /
• pp.83-90
• /
• 2008

A vibration-based monitoring system is newly proposed to predict the loss of prestress forces in prestressed concrete (PSC) girder bridges. Firstly, a global damage alarming algorithm is newly proposed to monitor the occurrence of prestress-loss by using the change in frequency responses. Secondly, a prestress-loss prediction algorithm is selected to estimate the extent of prestress-loss by using the change in natural frequencies. Finally, the feasibility of the proposed system is experimentally evaluated on a scaled PSC girder model for which acceleration responses were measured for several damage scenarios of prestress-loss.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.330-340
• /
• 2009

A naval shipboard inevitably movies in a pitch and roll direction under the influence of wave and wind in the sea. As a result, the shipboard gets in a continuous turning motion back/front and right/left. And the shipboard is also constantly exposed to many different kinds of disturbance signals including the vibrations of various frequencies from the internal equipments and their vibrations, strong waves, and impact from explosion. This paper formulates multi-body dynamic models similar to an actual system and simulates the pitch/roll positions of a 2-axes gimbals with PI controller for consecutive behavior of a naval shipboard including disturbance.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.227-233
• /
• 2002

The IME(implantable middle ear) system is Promising due to its ability to free from sound feedback and Produce a good sound quality and intelligibility with low distortion even if it is operated with high gain for severe hearing impaired. The differential electromagnetic vibration transducer. which was developed for using in IME system and has two small magnets attached the same Pole facing in the coil. is not influenced by environmental external magnetic field. Besides, it has high vibration efficiency and good frequency response characteristics. In this Paper, using acoustic model of the transducer and ear model of normal Person. the signal transfer characteristics of the IME system are analyzed and investigated From the differences of the characteristics between normal ear and the IME system, it is Possible that design of the IME system that have the signal transfer characteristics similar to normal person's ear.