Measurement of Plate Vibration by Using Phase Signals

위상신호를 이용한 단순평판의 진동계측

  • 함연수 (홍익대학교 대학원 기계공학과) ;
  • 김정수 (홍익대학교 공과대학 기계공학과) ;
  • 김관주 (홍익대학교 공과대학 기계공학과)
  • Published : 2000.12.01

Abstract

Applicability of the vibration signal phase for predicting the modal damping properties of structures is investigated. For uniform plates with different internal damping levels, the phase delay as a function of the frequency span as well as a function of the distance between the excitation and response measurement points are experimentally obtained. Dependence of the phase characteristics on the amount of structural damping is elucidated -more heavily damped plate shows notably reduced phase delay at intermediate distances. The experimental results compare favorably with analytical predictions, and show much promise for further refinement as a tool for estimating structural properties.

Keywords

References

  1. J. Sound & Vibration v.29 no.2 Material Damping - Introductory Review of Mathematical Models, Measures and Experimental Techniques Bert, C. W.
  2. Shock & Vibration Bulletin no.48 Specification of Damping Material Performance Henderson, J. P.;Jones, D.I.G.
  3. J. Acoust. Soc. Am. v.34 Loss Factors of Viscoelastic Systems in Terms of Energy Concepts Ungar, E. E.;E.M. Kerwin, Jr.
  4. The Shock & Vibration Bulletin no.51 On Modeling Viscoelastic Behavior Rogers, L.
  5. J. Sound & Vibration v.93 no.3 Costrained Layer Damping with Vitreous Enamel Kumar, B.;M.L. Drake
  6. Noise and Vibration Control Beranek, L. L.
  7. 대한기계학회논문집(A) v.21 no.11 구조물 진동 · 소음의 수치해석시 최적요소 크기는 λ/4이다 김정태;강준수
  8. Machinery Noise and Diagonosis Richard H. Lyon