• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.143-154
• /
• 2020

In this study, four types of bodice patterns of elderly males in their 70s and 80s were made, and appearance evaluation was conducted through 3D simulation. For objective evaluation, airgap, cross section, color distribution, etc. were analyzed to compare differences between patterns. The pattern shape of bodice for elderly males was a pattern without darts except for the L pattern. As a result of appearance evaluation for 3D simulation, the elderly males' pattern was found to have a significant difference among the patterns on the front, side, and back items, and the H pattern was analyzed as the best pattern in all items except the armhole shape on the side. As a result of evaluating the airgap, color distribution, and cross-section, the most suitable pattern for the elderly male's body type was analyzed as the H pattern. Based on the H pattern, it is thought that the development of a pattern suitable for the upper body shape of elderly male should be made.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.271-278
• /
• 2010

Semi rigid pavement is a pavement type using advantages of both flexibility of asphalt pavement and rigidity of concrete pavement by infiltrating cement paste into voids of open graded asphalt mixtures. The semi rigid pavement has better smoothness and smaller driving vibration or noise comparing to the concrete pavement, and has smaller permanent deformation and has temperature falling effect comparing to the asphalt pavement. The temperature falling effect were investigated at a semi rigid overlay pavement test section, and the temperature falling and water retaining effects were verified by measuring the temperature and weight of specimens at a housetop. Horizontal and vertical stresses and strains were compared by structural analysis of the semi rigid pavement and asphalt pavement using the Abaquser o, a commercial 3D finite element analysis program. The results were verified by Bisar 3.0, a multi-layered elastic analysis program. Performance of the semi rigid pavement and asphalt pavement were compared by predicting fatigue cracking based on the structural analysis results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.355-361
• /
• 2020

Among these satellites, low - orbit small satellites with military characteristics require multi - target observation, and demand for high-resolution photographs and images is increasing. Fast maneuverability is the most important factor for high-resolution images and multi - target observations. However, in the case of a small satellites, it is possible to perform the attitude maneuver if it has high speed, but the residual vibration occurs when the attitude maneuver is completed and the next attitude maneuver is completed. In this study, to verify the vibration characteristics of the plate generated after attitude maneuver, an experimental fixture for simulating the attitude maneuver was fabricated and tested. In addition, Eddy Current Damper (ECD) using Eddy Current Brake system (ECB) is proposed as a passive damping method using permanent magnet to reduce vibration. A mathematical model was established to apply ECD and it was experimentally implemented according to the magnetic flux density and the air gap of the permanent magnet. One plate of four solar panels (plate) was specified, the residual vibration reduction performance after the test was verified experimentally.

• Resources Recycling
• /
• v.33 no.1
• /
• pp.37-47
• /
• 2024

In grouting, the LW method is commonly employed to induce the gelation of cementitious material using water glass, thereby restricting the extent of material injection. Nevertheless, challenges manifest when materials are lost before gelation, particularly in regions with high groundwater flow rates or significant subsurface voids. This study developed a thixotropic grout material using LFS and GGBFS to mitigate material loss during injection, with an assessment of its flow characteristics, durability in marine exposure, strength, and injection properties. The outcomes revealed that the thixotropic grout material exhibited flow ranging from 105 to 143 mm and enhanced strength and durability compared to the LW method. Furthermore, field tests substantiated that applying vibration and impact improved impermeability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.576-582
• /
• 2017

The switching system in a maglev train is an indispensable element for distributing train routes, and it should be designed to ensure safe operation. Unlike conventional wheels on rails, the switching track in EMS-type maglev is supported by a group of 3 to 4 steel girders. When the vehicle changes its route, the segmented track allows the girders to change from a straight position to a curved one with a small radius of curvature. Hence, the structural characteristics of the segmented switching system may affect the levitation stability of the maglev vehicle. This study experimentally evaluates the dynamic interaction between maglev vehicles and a segmented switching system. The results may be helpful for improving the switching system. The measured levitation and lateral air gaps were evaluated at a vehicle speed of 25 km/h, and the ride quality of the Maglev vehicle was determined to be "comfortable" according to the UIC 513 standard.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1C
• /
• pp.43-52
• /
• 2006

Despite several constitutive models have been proposed and applied, it is still difficult to choose a suitable model and to estimate adequate analysis parameters. Furthermore, a cyclic shear behavior under the volume change caused by the seepage is more complex. None of the constitutive model is available at present in the expression of the cyclic behavior of soil under an additional volume change condition by seepage. Therefore, a new geotechnical hybrid simulation system which can control the pore water immigration was developed. The system enables a quantitative evaluation of the residual deformation such as lateral spreading and settlement caused by the liquefaction. The seismic responses in a one-dimensional slightly inclined multilayered soil system are taken into consideration, and the soils are governed by both equation of motion and the continuity equation. Furthermore, the estimation and the selection of the soil parameter for the representation of the strong nonlinearity of the material are not required, because soil behaviors under the earthquake motions are directly introduced instead of a numerical soil constitutive model. This paper presents the concept and specifications of the system. By applying the system to an example problem, the permeability effect on the seismic response during cyclic shear is studied. The importance of the volume change characteristics of sandy soil during and after cyclic shear is shown in conclusion.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.284-291
• /
• 2006

Recently with the motorizing of electric home appliances and car systems, there is increasing interest in high efficiency electric motors. Thus, the present study described the operating characteristics of coreless AFPM motor that is highly efficient in high speed driving, and discussed its electric characteristics from the perspective of design. In particular, we examined back electromotive force and the magnetic field characteristic in slits, which have significant effects on the characteristic of the motor, and conducted simulation and experiment on control characteristic according to inductance characteristic. This study analyzed torque speed and efficient operation characteristic as well as control characteristic through comparing the result of motor design with the result of output characteristic experiment based on the electric network method. Furthermore, we evaluated vibration and noise that may occur due to the absence of core.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.862-865
• /
• 2004

Faults such as broken rotor bars, static and dynamic eccentricity are often reported in induction motors. These faults increase the down-time of equipment, which causes major loss of earnings to the industry. This paper presents a result of the finite-element(FE) analysis of air-gap flux variation in induction motors when rotor vibration conditions occur, An accurate modelling and analysis of rotor vibration in the machine are developed using FE software packages, and measuring the flux are made using the search coils. In the FE analysis, an induction motor with 380 [V], 5[HP], 4 Poles, 1742 [rpm] ratings is used. The results of FE analysis can be used for on-line vibration monitoring of the induction motors.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.167-168
• /
• 2006

본 논문은 현장에 운전 중인 모터를 효율적으로 고압 모터 감시 및 진단 기법을 검토하고 현장에 보다 적합한 고압모터 감시 및 진단 시스템을 설계 및 개발에 관하여 기술하였다. 고압 모터의 감시 및 진단 방법은 MCSA(Motor Current Signature Analysis) 기법을 기반으로 하여 순시전력, 공극토크, 진동분석 등 다양한 기법이 있으며 이 기법을 적용한 시스템이 출시되고 있다. 그러나 사용자의 요구 및 편이가 반영되지 않아 그대로 적용하기에는 어려움이 있다. 따라서 본 논문에서는 국내의 실정 및 사용자의 편이 맞도록 진단 시스템을 개발 필요성이 요구되어 다양한 검출 요소를 종합적으로 이용한 보다 현장에 적합하고 유용한 모터 감시 시스템을 설계하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.115-120
• /
• 2021

In this paper, an operating algorithm for single-phase permanent magnet synchronous motor based on PR current controller is proposed. In general, an asymmetric gap may occur depending on the shape of the rotor of single-phase PMSM, and this causes noise and vibration during high-speed operation. Therefore, in this paper, an operating algorithm for a single-phase PMSM usihng a proportional resonant current conrtoller with excellent control stability was proposed. Proportional resonant current controller has on steady state error is relatevly robust against distortion. Also, steady state error of AC input can be eleminated without complicated calculation process. The validity and availability of the proposed algorithm are verified through the experiment.