• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1243-1248
• /
• 2003

It is very important to measure linear motion accuracy of NC lathe as it affects all other parts of machines machined by them in industries. If the motion accuracy of NC lathe is bad, the dimension accuracy and the change-ability of works will be bad in the assembly of machine parts. In this paper, computer software systems are organized to measure linear motion of ATC(Automatic tool changer) on zx plane of NC lathe using two linear scales and the time pulses coming out from computer in order to get data at constant time intervals from the linear scales. And each sets of error data obtained from the test is discripted to plots and the results of linear motion errors are expressed as numerics by computer treatment.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.90-91
• /
• 2003

대부분의 가공기 혹은 측정기에 있어 이송테이블은 그 기능수행의 기본을 담당하고 있으며 이송테이블의 운동 정밀도와 고속화는 목표하는 정밀도와 생산성으로 직결된다. 종래에는 형상특성, 열변형 등의 계통 오차만을 오프라인(Off-line)으로 측정하고 소프트웨어적으로 보상하는 방법을 사용하였으나 초정밀 분야에서 요구되는 테이블의 운동정밀도는 기계적 강성한계를 넘는 정밀도이므로, 테이블 이송 시 발생하는 운동오차를 실시간으로 측정하고, 보상할 수 있는 온라인(On-line)개념의 능동형 보상이 필요하다. (중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.139-148
• /
• 2002

Motion errors of linear motion guideway are analyzed theoretically in this paper. For the analysis, an new algorithm predicting motion errors of bearing and guideway is proposed using the Hertz's elastic deformation theory. Accuracy averaging effect can be calculated quantitatively by analyzing relationship between motion errors of guideway and spatial frequency of rail form error. Influences of design parameters on the motion errors including the number of balls, preload, ball diameter, bearing length and the number of bearings are analyzed. As it is difficult to measure the rail form error, experimental results are compared with results analyzed by the equivalent analysis method which evaluate the motion errors of guideway using the measured errors of bearing. From the experimental results, it is confirmed that the proposed analysis method it effective lo analyze the motion errors of linear motion bearing and guideway.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.3
• /
• pp.34-42
• /
• 1993

수중운동 추적체계의 추적 성능은 표적에 부착된 핑거로부터의송신음향이 수중센서에 도달하기 까지의 시지연과, 해저에 부설된 각 센서가 시지연을 이용하여 기하학적으로 계산하는 LOP를 얼마나 정확하게 추출하느냐에 달려있다. 본 논문에ㅓ는 수중운동 추출하느냐에 달려있다. 본 논문에서는 수중운동 추적체계의 추적성능을 예측하기 위하여 먼저 CRLB를 이용한 시지연 예측오차의 기준경계식을 유도하고, 임의 표적운도에 이를 적용시켜 추적거리오차를 추출하였다. 시뮬레이션 결과, 표적이 원형 기동하는 경우보다 직선 기동하는 경우에 표적위치에 따라 오차의변화가 더 심하고, 수중운동 추적체계의 이론적 설계성능은 주파수 대역에 의해 영향을 가장 많이 받음을 확인하였다. 한편 4km*4km 범위의 수중센서 패턴을 사용하고 주파수 대역폭을 200Hz로 취한 경우 시간지연에 의한 수중운동 추적체계의 이론적 추적오차는 0.24m 이내로 시뮬레이션 되었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.15-21
• /
• 1997

This paper presented a linear motion accuracy by using two-dimensional probe with the master block and the square for NC machine tools. This measuring system could be measured motion error due to numerical control system. The results of measurement and simulation for motion error were similar, and so, this system had enough accuracy to measure a linear motion accuracy for NC machine tools. The experimental results are as follows. 1. This measuring system could be measured motion error due to mumerical control system. 2. The results of measurement and simulation for motion error were similar. 3. This measuring system had enough accuracy to measure a linear motion accuracy for NC machine tools.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.77-85
• /
• 2002

An analysis method which calculates corrective machining information for improving the motion accuracy of linear motion guide Is proposed in this paper. The method is composed of two algorithms. One is the algorithm fur prediction of the motion errors from rail form error. The other is the algorithm for prediction of rail form error from the motion errors of table. Transfer function is utilized in each algorithm, which represents the ratio of bearing reaction force variation to unit magnitude of spatial frequencies of raid from error. As the corrective machining information is acquired from the measured motion errors of table, the method has a merit not to measure rail form error directly. Validity of the method is verified both theoretically and experimentally. By applying the method, linear motion error of test equipment is reduced from 5.97$\mu$m to 0.58$\mu$m, and reduced from 32.78arcsec to 6.21 arcsec in case of angular motion error. From the results, it is confirmed that the method is very effective to improve the motion accuracy of linear motion guide.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.275-284
• /
• 2011

The accuracy simulation technology of linear motion system is introduced in this paper. Motion errors and positioning errors are simulated using informations on the design parameters of elements of linear motion system. 5 Degree-of-freedom motion error analysis algorithm utilizing the transfer function method and positioning error analysis algorithm which are main frame of accuracy simulation are introduced. Simulated motion errors are compared with experimental results for verifying the effectiveness. Then, using the proposed algorithms, simulation is performed to investigate the effects of ballscrew and linear motor on the motion errors. Finally, the influence of feedback sensor position on the positioning error is also discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.5
• /
• pp.405-413
• /
• 2015

This paper presents the motion accuracy simulation considering loads such as workpiece weight, cutting force, cogging force of a linear motor, and force caused by misalignment and runout error of a ballscrew in linear motion units. The transfer function method is basically utilized to estimate 5-DOF motion errors, together with the equilibrium equations of force and moment on the table. The transfer function method is modified in order to consider clearance changed according to the loads in the double sided hydrostatic/aerostatic bearings. Then, the analytic model for predicting the 5-DOF motion errors is proposed with the modified transfer function method. Motion errors were simulated under different loading conditions in the linear motion units using hydrostatic, aerostatic, and linear motion bearings, respectively. And the proposed analytic model was verified by comparing the estimated and measured motion errors.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.12
• /
• pp.114-120
• /
• 1997

For compensating the error motion of hydrostatic tables, we have introduced a way that the clearance of table is controlled corresponding to the amount of eror with the actively controlled variable capillary, named as ACC. In previous paper, through the basic test, it was confirmed that by the use of ACC, the error motion within 2.7$\mu$ m of a hydrostatic table could be compensated with the resolution of 27nm, 1/100 contollable range, and with the frequency bandwidth of 5.5Hz, structurally. In this paper, we performed practical compensation of the linear and angular motion error of hydrostatic table using ACC. For improving the compensated motion accuracy, iterative control method is put into the control system. The experimental results show that by the simultaneous compensation of error, the linear and angular motion error are improved upto 0.25$\mu$ m and 0.4arcsec, which are about 1/10 and 1/3 of the non-compensated motion errors respectively.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.107-112
• /
• 1984

수동 Wave-front curvature ranging 방법의 통계적성능에 대한 일반적 결과가 유도된다. 센서들의 비선형 및 부동간격 센서들의 운동효과로 인한 표적거리의 편의(bias) 및 편차9variance)가 센서간의 운동이 상관관계를 가지고 있을 때 유도된다. 이 논문은 센서운동이 정규분포(normal distribution)를 가지며 평균이 0, 같은 편차 및 투시할 수 있는 higher moment를 가지고 있다고 가정한다. 유도된 일반적 결과를 이용하여 거리편의 및 편차는 표적거리, 방위, 센서운동의 상관계수 및 방향각(heading)표준편차 변화에 대해 그림으로 나타나 있다. 표적거리가 센서간격보다 아주 큰 경우 센서간격이 감소할수록, 표적거리가 증가할수록, 거리편의 및 편차는 증가한다. 상관계수가 증가할수록 거리편의는 직선적으로 감소하며, 거리편차는 센서 방향각 오차가 클 때 최소가 되는 상관계수가 존재하며 이는 표적거리, 방위 및 센서간격의 복합함수이다.