• Journal of Korean Society of Forest Science
• /
• v.9 no.1
• /
• pp.1-44
• /
• 1969

The important results which have been obtained in the investigation can be recapitulated as follows. 1. As demostrated by the experimental results and analyses concerning their effects in the on-ground type mushroom house, the constructions in relation to the side wall and ceiling of the experimental houses showed a sufficient heat insulation on effect to protect insides of the houses from outside climatic conditions. 2. As the effect on the solar type experimental mushroom house which was constructed in a half basement has been shown by the experimental results and analyses, it has been proved to be effective for making use of solar heat. However there were found two problems to be improved for putting solar houses to practical use in the farm mushroom growing: (1) the construction of the roof and ceiling should be the same as for the on-ground type house, and (2) the solar heat generating system should be reconstructed properly. A trial solar heat generating system is shown in Fig. 40. 3. Among several ventilation systems which have been studied in the experiments, the underground earthen pipe and ceiling ventilation, and vertical side wall and ceiling ventilation systems have been proved to be most effective for natural ventilation. 4. The experimental results have shown that ventilation systems such as the vertical side wall and underground ventilation systems are suitable to put to practical use as natural ventilation systems for farm mushroom houses. These ventilation systems can remarkably improve the temperature of fresh air which is introduced into the house by heat transfers within the ventilation passages, so as to approach to the desired temperature of the house without any cooling or heating operation. For example, if it is assuming that x is the outside temperature and y is the amount of temperature adjustment made by the influence of the ventilation system, the relationships that exist between x and y can be expressed by the following regression lines. Underground iron pipe ventilation system ${\cdots}{\cdots}$ y=0.9x-12.8 Underground earthen pipe ventilation system ${\cdots}{\cdots}$y=0.96x-15.11 Vertical side wall ventilation system${\cdots}{\cdots}$ y=0.94x-17.57 5. The experimental results have shown that the relationships existing between the admitted and expelled air and the $Co_2$ concentration can be described with experimental regression lines or an exponent equation as follows: 1) If it is assumed that x is an air speed cm/sec. and y is an expelled air speed in cm/sec. in a natural ventilation system, since the y is a function of the x, the relationships that exist between x and y can be expressed by the regression lines shown below: 2) If it is assumed that x is an admitted volume of air in $m^3/hr$ and y is an expelled volume of air in $m^3/hr$ in a natural ventilation system, since the y is a function of the x, the relationships that exist between x and y can be expressed by the regression lines shown below. 3) If it is assumed that the expelled air speed in cm/sec and replacement air speed in cm/sec. at the bed surface in a natural ventilation system are shown as x and y, respectively, since the y is a function of the x, the relationships that exist between x and y can be expressed by the following regression line: G.E. (100%)- C.V. (50%) ventilation system${\cdots}$ y=0.54X+0.84 4) If it is assumed that the replacement air speed in cm/sec. at the bed surface is shown as x, and $CO_2$ concentration which is expressed by multiplying 1000 times the actual value of $CO_2$ % is shown as y, in a natural ventilation system, since the y is a function of the x the relationships that exist between x and y can be expressed by the following regression line: G.E. (100%)- C.V. (50%) ventilation system${\cdots}{\cdots}$ y=114.53-6.42x 5) If it is assumed that the expelled volume of air is shown as x and the $CO_2$ concentration which is expressed by multiplying 1000 times the actual of $CO_2$ % is shown as y in a natural ventilation system, since the y is a function of of the x, the relationships that exist between x and y can be expressed by the following exponent equation: G.E. (100%)-C.V. (50%) ventilation system${\cdots}{\cdots}$ $$y=127.18{\times}1.0093^{-X}$$ 6. The experimental results have shown that the ratios of the crass sectional area of the G.E. and C.V. vent to the total cubic capacity of the house, required for providing an adequate amount of air in a natural ventilation system, can be estimated as follows: G.E. (admitting vent of the underground ventilation)${\cdots}{\cdots}$ 0.30-0.5% (controllable) C.V. (expelling vent of the ceiling ventilation)${\cdots}{\cdots}$ 0.8-1.0% (controllable) 7. Among several heating devices which were studied in the experiments, the hot-water boilor which was modified to be fitted both as hot-water toiler and as a pressureless steam-water was found most suitable for farm mushroom growing.

• Korean Journal of Ichthyology
• /
• v.29 no.3
• /
• pp.224-228
• /
• 2017

Two specimens of Ruvettus pretiosus (227.0 and 238.3 mm in standard length), belonging to the family Gempylidae, was firstly collected by using a gill net from the eastern coastal waters of Jejudo Island, Korea in November 2013. This species is characterized by having the following morphological traits: XV, 17~19+2 dorsal fin rays; II, 15~16+2 anal fin rays; belly keeled between pelvic fin and anus; body covered with cycloid scales, interspaced with rows of sharp bony tubercles. R. pretiosus can be easily distinguished from three Korean Snake mackerels (Thyrsitoides marleyi, Rexea prometheoides and Gempylus serpens) by having belly keeled between pelvic fin and anus, and cycloid scales covered the body and interspaced with rows of sharp bony tubercles. Based on morphological and molecular approaches, the specimens were identified as R. pretiosus. We propose new Korean names, "Gi-reum-chi-sok" and "Gi-reum-chi" for the genus and species, respectively.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.27-35
• /
• 2014

The existing flow regime map on mixed convection in vertical cylinders was investigated through an analysis of original literatures and its re-formation. The original literatures related to the existing map were reviewed. Using the investigated data and heat transfer correlations, the map was redrawn independently, and compared with the existing map. The redrawn map showed that mixed convection regime was not curved lines but straight lines and the transition regime was unable to be reproduced. Unlike the existing map with a little data, there are lots of data in the redrawn map. The reviews revealed that the existing map used the data selectively among the experimental and theoretical results, and a detailed description for lines forming mixed convection and transition regime was not provided. While considerable studies on mixed convection have been performed since that of Metais and Eckert, the existing map has still been used as the best method to distinguish natural, forced and mixed convection regime.

• Research in Plant Disease
• /
• v.8 no.3
• /
• pp.171-174
• /
• 2002

Powdery mildew of eggp1ant was found in Yeoiu, Korea in autumn 2000. Many white and Powdery mycelial colonies appeared on leaves, petioles and branches of the plants. Conidia with fibrosin bodies were ellipsoid to elongate-ellipsoid, 25~40$\times$15~22 ${\mu}{\textrm}{m}$ in size and formed in chains with crenate edge. Conidiophores were erect on superfical mycelium, 47~100 ${\mu}{\textrm}{m}$ in length. Germ tubes from conidia were simple and unbranched. No cleistoth-ecia were observed. On the basis of morphological characters of the conidial stage, the fungus was identified as Sphaerotheca fusca.

• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.182-192
• /
• 1999

The new GD/ICP-AES quick change over system has been developed and characterized. Within less than 15 minutes, ICP-AES could be switched to GD-AES and vise a versa. As a result, both solid and liquid samples could be analyzed in a very short period of time by the ICP/GD-AES quick change over system developed in our laboratory. The influences of the experimental variables, such as flow rate of coolant gas, flow rate of auxiliary gas, flow rate of sample carrier gas, sampling depth, orifice size of sampling cone, and rf (radio frequency) power on emission intensity have been presented. The detection limits of Cd(I) 228.8 nm, Mn (II) 257.61 nm, and Fe(II) 259.95 nm were found to be 3.86, 1.49, and 5.79 ppb, respectively. And linealities of the calibration curves were measured to be unity.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.99-104
• /
• 1999

A stepwise gradient elution with two wavelengths detection was performed for the separation and determination of some anions in saline water. The eight anions such as iodate, bromate, nitrite, bromide, nitrate, chromate, iodide and thiocyanate were successfully separated using AS-7 column and sodium chloride/sodium phosphate buffer solution as an eluant within 40 min. The separation behaviors of anions were studied at various sodium chloride concentrations. The peak shapes of anions of bromate, nitrite, bromide and nitrate gradually broadened as the concentration of sodium chloride increased until 1.0 M in the sample solutions. However, no effect was observed in the peak shapes of chromate, iodide and thiocynate. A good linearity was obtained at the range of ppm(mg/L). The detection limit was proved to be $10-720{\mu}g/L$ for the eight anions with $50{\mu}L$ injection volume. This method was applied to the determination of $Br^-$, ${NO_3}^-$ and $I^-$ in sea water.

• Korean Journal of Food Science and Technology
• /
• v.9 no.4
• /
• pp.271-276
• /
• 1977

Treating with step concentration of papain, round mucle of Korean cattle were cut in longitudinal and cross section and stained. Collagenous fibre and elastic fibre of its connective tissue were observed microscopically. The results were as follows: 1) In proportion to the increase of enzyme concentration amorphous bundle of collagenous fibre were loosed gradually and destroyed in the long run and besides the property of this fibre stained became remarkably weak. 2) Elastic fibre was paralleled to muscle fibre and in proportion to the increase of enzyme concentration, it was lost elasticity, loosed, straightened and broken remarkably to pieces. 3) Histological variation of collagenous fibre and elastic fibre treated with enzyme was more remarkable than control.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.163-175
• /
• 2002

Fatalities from traffic accidents constitute one of the major health issues as well as safety ones in Korea. It has been reported that traffic accident is affected by the combined effects of road. vehicle. and human factors. Over the past few decades, a number of studies have been conducted to find the impact of road geometric factors on traffic safety. The purpose of this study is to investigate the effect of road geometric factors on traffic safety on Korean expressways. Detailed geometric design data were available from Korea Highway Corporation. Five-year traffic accident data on Honam expressway were collected and analyzed. It was found that following geometric factors influence traffic safety on expressways : radius of curve, curve length, and length of straight section. Furthermore, the existence of I.C. turned out to have a significant impact on traffic safety level. Based on the data analysis several multiple regression forms that relate traffic accident frequencies and geometric factors on expressways are developed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.102-111
• /
• 2012

Expresway traffic accident is fatal accident by high speed, especially human injury is a great social issue. This paper aims to identify characteristic differences of highway accidents that involve human injuries or not. To analysis the elements that affect the two types of accidents used the logistic regression model. The analysis showed that human injury accident rate is increased in case of straight road, flat, or cut-slope areas, barriers, male driver, and older driver. These results provide the ground for actions to counter the problems. By discovering factors for accidents leading to fatality, this study can provide important implications for authorities that establish highway safety measures and policies in preventing human injuries or deaths from car accidents.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.3
• /
• pp.57-66
• /
• 1982

This study is directed toward the statical analysis of the curved girder bridge having irregular supports, This paper is specifically intended to propose an analytical methods in order to obtain the forces and displacements a section of girder bridges for mini-computer design. Transfer matrix, one of the efficient and widly used techniques in the structual analysis for mini-computer, is applied for characteristics of the section of curved girder bridges considering practical applicability of the solution method. Also, by eliminating the terms which contain the central angle of the member, in their denominators it has shown that this solution may also be used for the girder bridges whose axes become straight.