• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.2
• /
• pp.134-143
• /
• 2016

This paper proposes a novel asymmetrical interior permanent magnet (IPM) brushless DC (BLDC) motor structure, which utilizes half-type permanent magnet (PM) configuration and has asymmetrical side gaps (slot next to the PMs) for reducing torque ripples. This structure uses 24% less volume of PMs than conventional IPM BLDC motor with a full set of magnets. The characteristics of the proposed motor are compared with three other half-type IPM BLDC motors through finite elements method (FEM) analysis, and the usefulness of the proposed motor was verified through experimental evaluation on prototypes of the conventional motor and proposed motor under various torque load conditions. This research obtained a high-performance IPM BLDC motor while decreasing manufacturing cost at the same time.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2381-2383
• /
• 1998

직류직권모터는 전동지게차와 같은 물류용 전동차에서 사용되는데, 우수한 기동 토오크를 가지는 반면에 파라미터의 열적, 변화가 심하고 마찰과 부하의 비선형성이 존재해 기존의 제어기로는 만족할 만한 성능을 내지 못한다. 본 논문에서는 이를 해결하기 위해 퍼지제어기를 사용한다. 퍼지제어기는 변수의 애매성에 바탕을 두고 제어하기 때문에 이러한 비선형성에 대해 강인하나, 소속함수의 결정과 퍼지규칙의 선정이 어려우며, 체계적인 방법이 존재하지 않는다. 이러한 퍼지제 어의 결점을 해결하기 위해 소속함수는 유전 알고리즘을 통해 자기동조 시키며 퍼지규칙은 오차와 오차변화율의 위상평면을 이용하여 결정한다. 실용성을 검증하기 위해 TI사의 DSP TMS320F240을 이용해 실시스템에 적용했으며, 이를 통해 부하의 변동 및 기준 속도의 변화에도 잘 대처함을 알 수가 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.149-155
• /
• 2013

For in-depth research of blood flow, it is important to create pulsating flow like the blood flow from heart beat. In this study, we developed a heart mimicking pulsatile pump and evaluated its performances. Main body of pump was produced using a piston pump, and its rpm and duty ratio was modulated by DC motor and encoder. To determine the part dimensions, principle stress theory and simple fluidic pressure analysis were used. The performance of pulsating pump was evaluated by comparing the pressure values and their deviations according to experimental variables. For the results, the output value of pressure followed the distribution of pulsating flow and its deviation was negligible. Through this study, we expect the established pulsating pump can be widely used in study of blood flow produce easy ways to related researchers.

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.114-121
• /
• 2001

Effect of sintering temperature and dusts content on sintered density ($\rho$) and magnetic properties were evaluated. Cores sintered at 1350 $^{\circ}C$ for 1 hour with the Fe powders containing up to 10 wt.% dusts showed a good AC/DC properties. For example, the DC magnetic properties of magnetic induction (B$_{15}$), coercive force (H$_{c}$) and permeability ($\mu$$_{max}$) of cores containing 10 wt.% dusts were ranging over 9.8~ 10.9 kG, 2.2-2.3 Oe and 1950~2050, respectively. These magnetic properties are equivalent to those of competitor's (i.e, Ancorsteel produced by Hoganas). The cores obtained from the present work are expected to apply for high-performance soft magnetic components such as automotive and DC motor.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.5
• /
• pp.46-50
• /
• 1997

In fuzzy logic control, static fuzzy rules cannot cope with significant changes of parameters of plants or environment. To solve this prohlem, self-organizing fuzzy control. neural-network-hased fuzzy logic control and so on have heen introduced so far. However, dynamically changed fuzzy rules of these schemes may make a fuzzy logic controller Fall into dangerous situations because the changed fuzzy rules may he incomplete or inconsistent. This paper proposes a new adaptive filzzy logic control scheme using a predictivc neural network. Although some parameters of a controlled plant or environment are changed, proposed fuzzy logic controller changes its decision outputs adaptively and robustly using unchanged initial fuzzy rules and the predictive errors generated hy the predictive neural network by on-line learning. Experimental results with a D<' servo-motor position control problem show that propnsed cnntrol scheme is very useful in the viewpoint of adaptability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.701-704
• /
• 2005

PID controllers, which have been widely used in industry, have a simple structure and robustness to modeling error. But They are difficult to have uniformly good control performance in system parameters variation or different velocity command. In this paper, we propose a nonlinear adaptive PID controller based on a cell-mediated immune response and a gradient descent learning. This algorithm has a simple structure and robustness to system parameters variation. To verify performances of the proposed nonlinear adaptive PID controller, the speed control of nonlinear DC motor is performed. The simulation results show that the proposed control systems are effective in tracking a command velocity under system parameters variation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.334-341
• /
• 2015

This paper develops a new system for remotely monitoring and controlling the windows and doors in mobile environment. We design and implement the opening and shutting unit, the gateway, and the control server system, respectively. The opening and shutting unit consists of the driver using DC motor and the motion controller which monitors the state and transfers the control information. The gateway supports TCP/IP and CDMA protocol, which is the interface of wire and wireless communication for transferring the current state and control information. The control server consists of the program to store and process the control information, the middleware to support the processing of various state message, and DB for monitoring the state and remotely controlling the system. Especially, an application software and the Web-based user interface have also been developed to support the mobile environment. The operation performances, environment influences, driving persistences, and operation failure ratio, which are based on PC and smart-phone, have been tested in 2 authorized agencies. The test results show that the developed system has a superior performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.158-158
• /
• 2009

기계적 에너지를 전기적 에너지로 변환하는 에너지 변환소자인 압전 세라믹스는 액추에이터, 변압기, 초음파모터 및 각종 센서로 응용되고 있으며, 그 응용분야는 크게 증가하고 있다. 최근에는 이러한 압전 소자를 앞으로 도래하는 ubiquitous, 무선 모바일 시대의 휴대용 전자제품, robotics 등의 분야에 적용하기 위하여 소형화 및 경량화를 구현하고자 다양한 연구가 진행되고 있다. 본 연구에서는 압전 특성이 우수한 PNN-PMN-PZT 삼원계 세라믹을 이용하여 압전 트랜스포머를 제작하고 전기적 특성을 평가하였다. 압전트랜스포머는 전왜-압전효과를 이용한 소전력용 고전압발생소자로서 종래의 권선형 트랜스포머에 비교해서 소형, 경량이면서 승압비가 높고 구조가 간단하므로 직류 고전압전원에 응용되고 있다. 압전트랜스의 이론적인 고찰은 Rosen 이후로 많은 연구자들에 의해서 보고되었다. 그런데 압전세라믹트랜스는 공진 시 강력한 에너지변환을 하기 때문에 재료의 물리적 특성이 매우 중요함에도 불구하고, 이러한 물리적 특성에 관한 연구는 거의 없었다. 따라서 본 연구에서는 물리적 특성과 전기적 특성의 상호 연관성을 고찰하고자 하였다. 압전트랜스용 재료는 전기기계결합계수($k_p$)와 기계적품질계수(Qm)가 높아야 한다. 전기기계결합계수를 높이기 위해서는 상경계 조성의 Pb(Zr,Ti)$O_3$[PZT]계 세라믹스가 가장 우수하다. 본 연구에서는 기계적 품질계수를 향상시키기 위해서 $Pb(Nn_{1/3}Nb_{2/3})_{0.06+x}(Mn_{1/3}Nb_{2/3})_{0.065-x}(Zr_{0.48}Ti_{0.52})_{0.875}0_3$계의 조성을 설계하여 압전특성을 평가하고 미세구조를 분석하였다. 또한 압전트랜스를 제작하여 입출력의 승압비 및 주파수 특성 등도 평가하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.5
• /
• pp.433-441
• /
• 1999

This paper presents a S-FES(Superconducting magnetic becuing Flywheel Energy Storage System) for the p purpose of replacing battery used to store the energy. Especially, the design elements of FES, such as the b beming, wheel mateηaI, and power converter, etc., are described. The design and manufacturing techniques of t the controllable IXlwer converter are proposed to generate the sinusoidal output current in the high speed operation and to get the const빠synchronous motor with halbach cuTay of high coesive I\d-Fe-B permanent magnet is used as the driver of F FES. The proposed S-FES system shows the stable rotation characteristics at high speed range about l 10,000[rpm]. To verify the validity of proposed system, the comparative study with the conventional ball b beming s~rstem is proceeded and it is well confirmed with the result of the lower friction losses of S-FES S system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1234-1243
• /
• 1992

A systematic procedure to design fuzzy PID controllers is developed in this paper. The concept of local fuzzy control cell is proposed by introducing both an adequate global control rule and membership functions to simplify a fuzzy logic controller. Fuzzy decision is made by using algebraic product and parallel firing arithematic mean, and a defuzzification strategy is adopted for improving the computational efficiency based on nonfuzzy micro-processor. A direct method, transforming the typical output of quasi-linear fuzzy operator to the digital compensator of PID form, is also proposed. Finally, the proposed algorithm is applied to an DC-servo motor. It is found that this algorithm is systematic and robust through computer simulations and implementation of controller using Intel 8097 micro-processor.