• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.10
• /
• pp.662-668
• /
• 2008

The objectives of the present work are to investigate the influence of the solution cooled absorber(SCA), refrigerant drain heat exchanger(RSX), exhaust gas/solution heat exchanger(ESX) and high efficiency solution heat exchanger on COP for a double-effect series-flow absorption chiller. A simulation program has been prepared for the cycle analysis of absorption chillers. As a result, solution heat exchangers(LSX, HSX) are the most effective element for the COP than the others. In spite of the poor contribution to COP, SCA plays an important role to reduce the crystallization phenomena of LiBr solution at solution heat exchanger. And the optimum solution split ratio varies with the relative size of RSX and LSX.

• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.52-60
• /
• 2020

When a bubble reaches a free surface, a bursting of the bubble produces a high speed jet. Despite its practical importance, significant effort has been devoted to investigate a bursting jet by a single bubble near a free surface. In the present study, we perform numerical simulations of bubbles in a tandem arrangement at Bo=0.05. The configuration of the tandem bubbles is systematically varied by changing a radius of a following bubble (RF) and the gap distance between two bubbles (L). Compared to a single bubble case, we show that the bursting bubble in the tandem arrangement accelerates, and the jet velocity increases. Moreover, we find that a critical gap distance at which the jet velocity unexpectedly changes exists in the tandem case.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.259-260
• /
• 2020

모듈화 멀티레벨 컨버터 (modular multilevel converter, MMC)는 고압직류송전(high-voltage direct current, HVDC)에 대한 기술이 발전함에 따라서 이와 관련된 전력변환 장치로써 많은 연구되어지고 있다. 10kV 이하로 구현되는 중압직류송전(medium-volatge direct current, MVDC) 시스템 및 모터 드라이브에 이용되는 MMC의 경우에는 수백 개의 직렬 서브모듈로 구성된 MMC가 사용되는 HVDC와 다르기 때문에 여러 모듈레이션 방식에서의 다른 장단점을 가지게 된다. 본 논문에서는 전력전자 시뮬레이션 툴인 PSIM을 이용하여 여러가지 모듈레이션의 MVDC으로의 적용에 있어서의 장단점을 분석한다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.326-327
• /
• 2020

본 논문은 비대칭 모듈형 멀티레벨 토폴로지를 이용한 컨버터 기반 발전원의 실계통 연계에 대한 실시간 시뮬레이터 모의를 수행하였다. 비대칭 모듈형 멀티레벨 컨버터를 구성하는 6개의 암은 직렬로 연결된 다수의 하프브릿지와 풀브릿지 서브모듈로 구성되어 있으며, 각각의 서브모듈을 서로 다른 전압으로 제어하여 출력품질을 극대화 할 수 있다. 본 실험에서 사용된 실계통 및 비대칭 모듈형 멀티레벨 컨버터는 Real-Time Digital Simulator (RTDS)의 RSCAD를 이용하여 모델링 하였으며, 해당 계통 내 컨버터 기반 발전원들의 응답을 결과로 다룰 것이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.810-813
• /
• 2008

본 논문에서 연구하고 구현된 JTAG(Joint Test Action Group) Writer는 하나의 SoC(System On a Chip)만 지원하도록 설계된 기존 제품의 단점을 보완할 수 있도록 각 SoC의 제조 회사에서 제공하는 BSDL(Boundary Scan Description Language)을 이용하여 여러 가지 SoC에 쉽게 사용할 수 있도록 모듈화 했다. 그리고 기존 제품들이 사용하고 있는 직렬 포트나 병렬 포트 대신 안정적이고 편리한 USB(Universal Serial Bus) 접속규격을 지원하도록 개선했다.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.1
• /
• pp.17-25
• /
• 2020

We present a novel multi-core CPU based parallel algorithm for the cell-connectivity information extraction algorithm, which is one of the preprocessing steps for volume rendering of unstructured grid data. We first check the synchronization issues when parallelizing the prior serial algorithm naively. Then, we propose a 3-step parallel algorithm that achieves high parallelization efficiency by removing synchronization in each step. Also, our 3-step algorithm improves the cache utilization efficiency by increasing the spatial locality for the duplicated triangle test process, which is the core operation of building cell-connectivity information. We further improve the efficiency of our parallel algorithm by employing a memory pool for each thread. To check the benefit of our approach, we implemented our method on a system consisting of two octa-core CPUs and measured the performance. As a result, our method shows continuous performance improvement as we add threads. Also, it achieves up to 82.9 times higher performance compared with the prior serial algorithm when we use thirty-two threads (sixteen physical cores). These results demonstrate the high parallelization efficiency and high cache utilization efficiency of our method. Also, it validates the suitability of our algorithm for large-scale unstructured data.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.31-39
• /
• 2012

In this paper, we propose a microprocessor-based automatic voltage regulator(AVR) to reduce consumers' electric energy consumption and to help controlling peak demanding power. Hybrid Switching Automatic Voltage Regulator (HS-AVR) consist of a toroidal core, several tap control switches, display and command control parts. The coil forms an autotransformer which has a serial main winding and four parallel auxiliary windings. It controls the output voltage by changing the combination of the coils and the switches. Relays are adopted as the link switches of the coils to minimize the loss. To make connecting and disconnecting time accurate, relays of the circuit have parallel TRIACs. A software phase locked loop(PLL) has been used to synchronize the timings of the switches to the voltage waveform. The software PLL informs the input voltage zero-crossing and positive/negative peak timing. The traditional voltage transformers and AVRs have a disadvantage of having a large mandatory capacity to accommodate maximum inrush current to avoid the switch contact damage. But we propose a suitable AVR for every purpose in smart grid with reduced size and increased efficiency.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.350-355
• /
• 2005

The probes of fiber optic OTDR (Optical Time Domain Reflectometry) sensor was developed to measure displacements of social infrastructures. This probe was simply constructed with two conventional optical fiber connectors, and a fiber bending part, which transforms displacement to optical loss. When the displacement was affected on the bending loss part, the reflected light intensity of one optical connector was changed. The displacement was determined from this reflected light intensity change of the connector. fiber optic OTDR displacement sensor was developed as the multiplexed type of one fiber line with 5 sensor probes. Multiplexing operation was tested by these 5 sensor probes.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.415-422
• /
• 2004

We propose and present a new multiplexed bend loss type single-mode fiber-optic sensor system for displacement measurement in order to measure the displacement of several mm of civil engineering structures such as bridges and buildings. We make a bend loss type fiber-optic sensor for measuring displacements using the signal difference between two reflection signals due to various bend losses generating at a pair of optical connectors by using the optical time domain reflectometer. And we fabricate a multiplexed bend loss type fiber-optic sensor detecting linear displacements of 4 measuring positions of an object by setting these new 4 fiber-optic sensors on a single mode fiber simultaneously. We find that the multiplexed fiber-optics displacement sensor has linearity of 0.9942, maximum displacement of 6 mm, and accuracy of 6% for 4 measuring points.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.3
• /
• pp.110-116
• /
• 2008

In this paper, we proposed an improvement technique of image encryption using binary phase computer generated hologram(BPCGH) and multi exclusive-OR(XOR) operations. For the encryption process, a BPCGH that reconstructs the original image is designed, using an iterative algorithm, and the resulting hologram is regarded as the image to be encrypted. The BPCGH is encrypted through the exclusive-OR operation with the random generated phase key image. Then the encrypted image is divided into several slide images using XOR operations. So, the performance of encryption for the image is improved. For the decryption process, we cascade the encrypted slide images and phase key image and interfere with reference wave. Then decrypted hologram image is transformed into phase information. Finally, the original image is recovered by an inverse Fourier transformation of the phase information. If the slide images are changed, we can get various decrypted BPCGH images. In the proposed security system, without a random generated key image, the original image can not be recovered. And we recover another hologram pattern according to the slide images, so it can be used in the differentiated authorization system.