• Title/Summary/Keyword: 직렬화

Search Result 314, Processing Time 0.022 seconds

A optimum studies of TCO/p-layer for high Efficiency in Amorphous Silicon Solar cell (비정질 실리콘 태양전지 고효율화를 위한 전면투명전도막/p 최적연구)

  • Lee, Ji-Eun;Lee, Jeong-Chul;Oh, Byung-Seng;Song, Jin-Soo;Yoon, Kyung-Hoon
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2007.11a
    • /
    • pp.275-277
    • /
    • 2007
  • 유리를 기판으로 하는 superstrate pin 비정질 태양전지에서 전면투명전도막(TCO)과 p-layer의 계면이 태양전지의 효율을 내는데 가장 큰 기여를 한다. 전면투명전도막(TCO)으로 현재 일반적으로 사용되는 ZnO:Al는 $SnO_2:F$ 보다 전기,광학적으로 우수하고, 안개율(Haze)높으며, 수소 플라즈마에서의 안정성이 높은 특정을 갖고 있다. 그래서 박막 태양전지 특성향상에 매우 유리하나, 태양전지로 제조했을 때, $SnO_2:F$보다 충진율(Fill factor:F.F)과 V_{\infty}$ 가 감소한다는 단점을 가지고 있다. 본 실험실에서는 $SnO_2:F$의 F.F가 72%이 나온 반면 ZnO:Al의 F.F은 68%에 그쳤다. 이들 원인을 분석하기 위해 TCO/p-layer의 전기적 특성을 알아 본 결과, $SnO_2:F$보다 ZnO:Al의 직렬저항이 높게 측정되었다. 이러한 결과를 바탕으로 p-layer 에 R={$H_2/SiH_4$}=25로 변화, p ${\mu$}c$-Si:H/p a-SiC:H 로 p-layer 이중 증착, p-layer의 boron doping 농도를 증가시키는 실험을 하였다. 직렬저항이 가장 낮았던 p ${\mu$}c$-Si:H/p a-SiC:H 로 p-layer 이중 증착에서 Voc는 0.95V F.F는 70% 이상이 나왔다. 이들 각 p층의 $E_a$(Activation Energy)를 구해본 결과, ${\mu$}c$-Si:H의 Ea 가 가장 낮은 것을 관찰 할 수 있었다.

  • PDF

Optimistic Concurrency Control based on TimeStamp Intervals for Broadcast Environment: OCC/TI (방송환경에서 타임스탬프 구간에 기반을 둔 낙관적 동시성 제어 기법)

  • 이욱현;황부현
    • Journal of KIISE:Databases
    • /
    • v.29 no.6
    • /
    • pp.477-491
    • /
    • 2002
  • The broadcast environment has asymmetric communication aspect that is typically much greater communication bandwidth available from server to clients than in the opposite direction. In addition, mobile computing systems generate mostly read-only transactions from mobile clients for retrieving different types of information such as stock data, traffic information and news updates. Since previous concurrency control protocols, however, do not consider such a particular characteristics, the performance degradation occurs when previous schemes are applied to the broadcast environment. In this paper, we propose optimistic concurrency control based on timestamp interval for broadcast environment. The following requirements are satisfied by adapting weak consistency that is the appropriate correctness criterion of read-only transactions: (1) the mutual consistency of data maintained by the server and read by clients (2) the currency of data read by clients. We also adopt the timestamp Interval protocol to check the weak consistency efficiently. As a result, we improved a performance by reducing unnecessary aborts and restarts of read-only transactions caused when global serializability was adopted.

Optimistic Concurrency Control Using Time-stamp Ordering in Mobile Databases (이동 데이터베이스 시스템에서 타임스탬프를 이용한 낙관적 동시성 제어 기법)

  • Kim Dae-Ho;Jeong Byeong-Soo;Lee Young-Koo
    • Journal of Internet Computing and Services
    • /
    • v.7 no.4
    • /
    • pp.79-90
    • /
    • 2006
  • Data broadcasting is an efficient method for disseminating data, and is widely accepted in the database applications of mobile computing environments because of its asymmetric communication bandwidth between a server and mobile clients. This requires new types of concurrency control mechanism to support mobile transactions executed in the mobile clients, which have low-bandwidths toward the server. In this paper, we propose an OCC/DTA (Optimistic Concurrency Control with Dynamic Time-stamp Adjustment) protocol that can be efficiently adapted to mobile computing environments. The protocol reduces communication overhead by using client-side validation procedure and enhances transaction throughput by adjusting serialization order without violating transaction semantics. We show that the proposed protocol satisfies data consistency requirements, and simulate that this protocol can improve the performance of mobile transactions in data broadcasting environments.

  • PDF

Implementation of a WWW Interface for Multiuser Interactive Intelligent Systems (다중사용자 대화형 지능시스템을 위한 WWW 인터페이스 구현)

  • Kim, Chang-Min;Kim, Yong-Gi
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.5 no.4
    • /
    • pp.479-488
    • /
    • 1999
  • 인터넷의 성장과 더불어 수많은 응용시스템들이 인터넷 기반 시스템으로 바뀌고 있다. 특히, 인터넷 기반 전문가시스템은 다양한 구조와 방법으로 설계될 수 있고 이미 제작되었던 수많은 인터넷 기반 전문가시스템들은 그 나름대로의 장단점을 가지고 있다. 본 연구는 특정 전문가시스템의 개발이 아니라 WWW(World Wide Web)을 사용자 인터페이스로 이용할 수 있는 전문가시스템 쉘에 관한 연구이다. 본 시스템은 WWW 하부구조에 대한 의존성을 제거, 클라이언트와 네크워크에 부담 격감, HTML과 부합하는 텍스트에 기초한 통신과 같은 장점 외에 중앙 집중적 다중 사용자 접근 관리 기능을 제공한다. 본 시스템은 다중사용자를 위한 서버/클라이언트 환경 구축을 위해 소켓을 이용하여 큐잉(queueing)과 직렬화(serialization)를 해결하고 비연결 지향적인 WWW의 특성으로 인한 사용자 관리의 어려움은 사용자의 IP 주소와 Timer를 이용한 휴무기간 검사를 이용하여 해결한다.Abstract The growth of internet drives many applications into internet-based systems. Internet-based expert systems can be designed with various concepts and methodologies, and they have their own merits and demerits. This papers is a study on a development of not expert system itself but expert system shell which is able to use WWW(World Wide Web) as user interface. The suggested system supports functions on multiuser management controlled by a server system as well as independence on development environments, minimization of the load for clients and network, and text-based communications such as HTML. The system uses socket, which solves problems of queuing and serialization, in order to construct multiuser server/client environmen and also the system solves the non-connective property of WWW which makes it difficult to control users and processes by using IP address and idle time which is supported by the timer.

Analysis of the Sleeve Dipole Array Antennas Using the Moment Method (모멘트 법을 이용한 슬리브 다이폴 배열안테나의 해석)

  • 배남진;최학근
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.10 no.7
    • /
    • pp.973-984
    • /
    • 1999
  • This paper presents a method of moments with the transmission line theory to analyze the sleeve dipole array antennas and analyses characteristics of that. There were several considerations for analysis of the method of moments. First, the method of moments were applied at both of the sleeve dipole elements and the coaxial line because the current flows on both of them. Second, the feed voltages of each sleeve dipole element were obtained by using a transmission line theory because the feeding structure is fed by coaxial line in series. Third, the series reactance between the coaxial line and the open side of the sleeve was considered as impedance loading on the antenna. The radiation patterns and current distributions from the numerical results were considered as variation of the feed distances and frequencies. To verify the validity of our method, 4 elements sleeve dipole array antennas with 1 λg distance were fabricated and measured, and then the measured radiation patterns were compared with the numerical results. The measured results were confirmed a good agreement with the numerical results.

  • PDF

Study on the structure of buried type capacitor for MCM (Multi-Chip-Module) (MCM-C(Multi-Chip-Module)용 내장형 캐패시터의 구조적 특성에 관한 연구)

  • Yoo, C. S.;Lee, W. S.;Cho, H. M.;Lim, W.;Kwak, S. B.;Kang, N. K.;Park, J. C.
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.6 no.4
    • /
    • pp.49-53
    • /
    • 1999
  • In this study, the characteristics of the structure of buried type capacitor for RF multi- chip-module are investigated. We developed many kinds of structures to minimize the space of capacitor in module and the value of parastic series inductance without any loss in capacitance, and in this procedure the effect of vias especially position, size, number length are analyzed and optimized. This characteristics of structures are checked through HFSS(high frequency structure simulator) of HP, and the value of parastic series inductance is calculated by equivalent circuit analysis. And ensuing the result of simulation, we made buried type capacitors using LTCC (low temperature cofired ceramic) material. In measurement of this sample, we found out the effective and precise method can be applied to buried type and characteristics of vias and striplines added for measuring are quantified.

  • PDF

A Study on Characteristics Analysis of Time Sharing Type High Frequency Inverter Consisting of Three Unit Half-Bridge Serial Resonant Inverter (Half-Bridge 직렬 공진형 인버터를 단위인버터로 한 시분할방식 고주파 인버터의 특성해석에 관한 연구)

  • 조규판;원재선;서철식;배영호;김동희;노채균
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.15 no.1
    • /
    • pp.90-97
    • /
    • 2001
  • A high frequency resonant inverter consisting of iliree unit Half-Bridge serial resommt inverter used as power source of induction heatmg at high frequency is presented in this paper. As a output [Dwer control strategy, sequencial time-sharing gate contml methcd is applied. This methcd is TDM(Time Division Multiplexing), which is broadly used with digital and analog signals transmission in communication system 1be analysis of the proposed circuit is generally described by using the normalized pararmenters. Also, the principle of basic operating and the its characteristics are estimated by the parameters such as switching frequency, load resistance. Also, according to the calculated characteristics value, a method of the circuit design and operating characteristics of the inverter is proposed. This paper proves the validity of theoretical analysis through the Pspice. This proposed inverter show that it can be practically used in future as power source system for induction heating application, DC-DC converter etc. r etc.

  • PDF

State Space Averaging Based Analysis of the Lithium Battery Charge/Discharge System (상태공간평균에 의한 리튬전지 충방전 시스템의 해석)

  • Won, Hwa-Young;Chae, Soo-Yong;Hong, Soon-Chan
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.14 no.5
    • /
    • pp.387-396
    • /
    • 2009
  • The life and performance of lithium battery are greatly influenced by the formation process which is essential in the process of manufacture. Charge/discharge system for the lithium battery are required for the formation process. To simulate such a system in a conventional method takes very long time and requires huge memory space to save data files. So the simulation may be impossible with a general-purpose PC. In this paper, the lithium battery is modelled to a resistor-capacitor serial circuit and the lithium battery charge/discharge system is analyzed and simulated by using state space averaging method. As a result, the simulation time is reduced dramatically and the simulation of the lithium battery charge/discharge system becomes possible on a general-purpose PC within 3 hours. Also, both the charge/discharge characteristics and the time required to charge/discharge of the lithium battery charge/discharge system can be observed. To verify the propriety of resistor-capacitor serial circuit modeling method for lithium battery and the validity of the analysis and simulation based on state space averaging, the lithium battery charge/discharge system is composed and experimentations are carried out.

VLSI Architecture of High Performance Huffman Codec (고성능 허프만 코덱의 VLSI 구조)

  • Choi, Hyun-Jun;Seo, Young-Ho;Kim, Dong-Wook
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.15 no.2
    • /
    • pp.439-446
    • /
    • 2011
  • In this paper, we proposed and implemented a dedicated hardware for Huffman coding which is a method of entropy coding to use compressing multimedia data with video coding. The proposed Huffman codec consists Huffman encoder and decoder. The Huffman encoder converts symbols to Huffman codes using look-up table. The Huffman code which has a variable length is packetized to a data format with 32 bits in data packeting block and then sequentially output in unit of a frame. The Huffman decoder converts serial bitstream to original symbols without buffering using FSM(finite state machine) which has a tree structure. The proposed hardware has a flexible operational property to program encoding and decoding hardware, so it can operate various Huffman coding. The implemented hardware was implemented in Cyclone III FPGA of Altera Inc., and it uses 3725 LUTs in the operational frequency of 365MHz

Implementation of Security Plan from .NET Remoting Environment (닷넷 리모팅 환경에서의 보안 방안 구현)

  • Kim, Young-Sear
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.10 no.4
    • /
    • pp.256-261
    • /
    • 2009
  • While .NET and J2EE bisects recent distributed environment, .NET displays "Remoting" as a technology to call remote object. Remoting is frequently used as a protocol in OLTP's WEB program development in form of RPC that exchange data in XML form under HTTP environment. Purpose of this research is to draw problems when applying security to .NET remoting technology that is recently used in web programming, and to find effective application plan by implementing. The main discussion is following. First, network layer security should be replaced to application layer security for better performance and flexibility. Second, the serialization procedure that is repeated in both remoting and encryption module should take place once. Lastly, implementation of "Surrogate" and "Compress" will be discussed that enables to eliminate unnecessary data(table relations, keys, etc) that is used in dataset object of .NET in order to reduce the size of data. It is possible to achieve improvement in speed by two times through immediate implementation in these cases. In order for easier use, component based framework should be supplied hereafter.

  • PDF