• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.3
• /
• pp.224-230
• /
• 2016

In this study, a single-power-conversion series-resonant ac-dc converter with high efficiency and high power factor is proposed. The proposed ac-dc converter consists of single-ended primary-inductor converter with an active-clamp circuit and a voltage doubler with series-resonant circuit. The active-clamp circuit clamps the surge voltage and provides zero-voltage switching of the main switch. The series-resonant circuit consists of leakage inductance $L_{lk}$ of the transformer and resonant capacitors $ C_{r1}$ and $ C_{r2}$. This circuit also provides zero-current switching of output diodes $D_1$ and $D_2$. Thus, the switching loss of switches and reverse-recovery loss of output diodes are considerably reduced. The proposed ac-dc converter also achieves high power factor using the proposed control algorithm without the addition of a power factor correction circuit and a dc-link electrolytic capacitor. A detailed theoretical analysis and the experimental results for a 1kW prototype are discussed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.8
• /
• pp.6-14
• /
• 2006

This paper is a study about a proper method of plasma generation to cleaning method and a high frequency power equipment circuit to generation of plasma that used cleaning of chamber for TFT-LCD PECVD. The high density plasma required for cleaning causes a possibility of high density plasma more than $1{\times}10^{11}[EA/cm^3]$. It apply a ferrite core of ferromagnetic body to a existing ICP form. In case of power transfer equipment on 400[kHz] high frequency to generation of plasma it makes certain a stable switching operation in condition of plasma through using a inverter form for general purpose HB. And it demonstrates the performance of power transfer equipment using methods of measurement which use a transformer of series combination the density of plasma and the rate of dissolution of $NF_3$ in condition of $A_r\;and\;NF_3$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.527-534
• /
• 2002

In this paper, efficiency in the acquisition of the PN code of the DS/CDMA system was analyzed by using the Nakagami-m probability density function that can model diverse fading channels. The system considers the fading environment that inevitably exists in the mobile communications channel environment. To analyze the efficiency of the system, the equations related to detection probability PD and false alarm probability PFA required for the acquisition of the PN code were induced by using the Nakagami-m probability density function. They were verified through simulation. For the DS/CDMA system an adaptive serial search technique was applied to acquire the PN code. To correct phase error, the equations related to detection probability PD and false alarm probability PFA that influence the time to acquire codes were induced after adding the PLL to each branch of the Rake Receiver. By using an induced equation, detection probability PD and false alarm probability PFA were verified through simulation.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.66-79
• /
• 1999

We investigate the effects of high input power on the performance of optical bistable symmetric self-electooptic effect devices (S-SEEDs) using extremely shallow quantum wells (ESQWs). In this study, we consider the four ESQWs SEEDs; anti-reflection (AR)-coated ESQWs S-SEED, back-to-back AR coated ESQWs S-SEED, asymmetric F뮤교-Perot (AFP) ESQWs S-SEED, and back-to-back AFP-ESQWs S-SEED. As the input power increases, device performances such as on/off contrast ratio, on/off reflectivity difference are seriously degraded because of ohmic heating and exciton saturation. On the other hand, switching speed of the device increases up to certain value and then begins to decrease. With reasonable optimization of the input power for the best switching speed operation of the devices in a cascading optical interconnection system, we simulate and analyze the system bit-rate of the various ESQWs S-SEEDs, for a mesa of $5{\times}5{\mu}m^2$ size, changing the namber of quantum wells for the external bias of 0 V and -5V.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.424-431
• /
• 2007

This thesis proposed H-Bridge Multi-Level Inverter for Fluidized Bed Combustion Boiler Secondary Air Fan in 200MW thermal power plant. The adjustable speed drive systems improve the efficiency in lightly load condition and extend the life span of motor by limiting the over current at starting. H-Bridge Multi-level Inverter is composed of the several series low voltage power cell inverters, which have the independent isolated do link, in each phase. KEPRI(Korea Electric Power Research Institute) has successfully completed to develop, install, and commission H-Bridge Multi-level Inverter(6.6kV, 1MVA). This thesis gives a full detail about H-Bridge Multi-level Inverter, proposed boiler DCS(Distributed Control System) logic, and commissioning test result.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.3
• /
• pp.1-8
• /
• 1972

The characteristics of tunnel diode pair circuit biased within the negative resistance region has also the voltage-control type negative resistance region, and the voltage at the center point of negative resistance region is described as the square-wave relaxation oscillation. In this paper, the period T, positive duration T1, negative duration T2 of the pulse are obatined from the characteristic curve T, positive duration T1, negative duration T2 of the pulse are obtained from the characteristic curve and observed actually, considring the fact that the pulse width and the period of square-wave at the center point of the negative resistance region is able to be controlle dby the blas volgate. Mereover, the relationship between T, T1 or T2 and circuit parameters is searched for and the Circuit parameters that satisfy the conditions of T1-T2 being proportional to the variation of bias voltage with Teonstant are determined. Thereafter, the bias voltage and the signal voltage are inserted serially to the PWM circuit and the characteristics of that circuit is analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1395-1401
• /
• 2005

Mobile manipulator is a robot that has mobility and manipulability with the combination of the task robot and mobile robot. One of the most important feature of the Mobile Manipulator is redundant freedom. Using the redundant freedom, Mobile Manipulator can move various mode, perform dexterous motion. It can have the wider workspace and better performance in avoidance of singularity and obstacle than the fixed base structured robot. Cooperation control using the Mobile Manipulator improves the performance of the robot with redundant freedom in workspace. In this paper, configuration control of the Mobile Manipulator has been studied using Task Segment and TOMM(Task-Oriented Manipulability Measure). For verifying the proposed algorithm, we implemented a mobile manipulator, PURL-II, which is composed of a mobile robot with 3DOF and a task robot with SDOF.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.479-488
• /
• 1999

인터넷의 성장과 더불어 수많은 응용시스템들이 인터넷 기반 시스템으로 바뀌고 있다. 특히, 인터넷 기반 전문가시스템은 다양한 구조와 방법으로 설계될 수 있고 이미 제작되었던 수많은 인터넷 기반 전문가시스템들은 그 나름대로의 장단점을 가지고 있다. 본 연구는 특정 전문가시스템의 개발이 아니라 WWW(World Wide Web)을 사용자 인터페이스로 이용할 수 있는 전문가시스템 쉘에 관한 연구이다. 본 시스템은 WWW 하부구조에 대한 의존성을 제거, 클라이언트와 네크워크에 부담 격감, HTML과 부합하는 텍스트에 기초한 통신과 같은 장점 외에 중앙 집중적 다중 사용자 접근 관리 기능을 제공한다. 본 시스템은 다중사용자를 위한 서버/클라이언트 환경 구축을 위해 소켓을 이용하여 큐잉(queueing)과 직렬화(serialization)를 해결하고 비연결 지향적인 WWW의 특성으로 인한 사용자 관리의 어려움은 사용자의 IP 주소와 Timer를 이용한 휴무기간 검사를 이용하여 해결한다.Abstract The growth of internet drives many applications into internet-based systems. Internet-based expert systems can be designed with various concepts and methodologies, and they have their own merits and demerits. This papers is a study on a development of not expert system itself but expert system shell which is able to use WWW(World Wide Web) as user interface. The suggested system supports functions on multiuser management controlled by a server system as well as independence on development environments, minimization of the load for clients and network, and text-based communications such as HTML. The system uses socket, which solves problems of queuing and serialization, in order to construct multiuser server/client environmen and also the system solves the non-connective property of WWW which makes it difficult to control users and processes by using IP address and idle time which is supported by the timer.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.539-546
• /
• 2006

A study on the polymerization of polyethylenedioxythiophene (PEDOT) and the carbonization process of a separator was carred out in order to apply conductive polymer PEDOT to the winding typed aluminum condenser as a solid electrolyte and a negative electrode. PEDOT was polymerized with ethylenedioxythiophene (EDOT) as a monomer and ferric-p-toluenesulfonate as an oxidizing agent. The separator of condenser element was carbonized to control its fibrous tissue for the purpose of making it easy to impregnate the PEDOT solution into the microporous etched pit of aluminum foil by preventing separator from concentrating the PEDOT solution on itself. The characteristics of condenser such as capacitance, dissipation factor, equivalent series resistance, and thermal resistance depended on a carbonization temperature and a carbonization time. It was found that a thickness and a density of the used separator were major parameters of carbonization process and the characteristics of condenser were affected by these parameters.

• Korean Journal of Ecology and Environment
• /
• v.35 no.2 s.98
• /
• pp.133-140
• /
• 2002

This study was performed in lab scaled oxidation pond. The removal efficiency of pollutant on the influence of changes of hydraulic retention time and pond style was investigated. The correlation between organic removal efficiency and dissolved oxygen concentration on algal photosynthesis showed the light time revealed a higher relationship more than the dark time, and the squares of the correlation coefficient of 15 days retention time were higher than that of 5 days in single pond. The variation of dissolved oxygen concentration of a series pond was from 4.2 to 19.8 mg/l under 5 days retention time, the concentration of dissolved oxygen increased with increasing step of series pond. Between the single pond and a series of pond system, a series of pond system showed better organic removal efficiency. Average removal efficiency range of $TBOD_5$ and $SBOD_5$ was $49{\sim}83%$ and $87{\sim}92%$, respectively. Algae should be removed appropriately to increase the removal efficiency of organic matter.