• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.1-7
• /
• 2010

This paper presents a low power digital PLL architecture and design for implementation of the PLL-based frequency synthesizers. In the proposed architecture, a wide band digital logic quadricorrelator is used for preliminary frequency detector and a narrow band digital logic quadricorrelator is used for final DCO control. Also, a circuit technique for reducing leakage current is adopted in order to minimize the standby mode power consumption of the deactivated block. The proposed digital PLL is designed and verified by MyCAD with MOSIS 1.8V $0.35{\mu}m$ CMOS technology, and the simulation results show that the power consumption can be lowered by more than 20%.

• Composites Research
• /
• v.18 no.4
• /
• pp.8-13
• /
• 2005

Rotating circular disks are widely used in data storage devices as well as in traditional industrial machines. Faster rotating speed is required in data storage devices for higher data transfer rate. In this Paper an application of composite materials to CD is proposed to increase critical speeds and the strength analysis was performed. A differential equation of displacement is derived for the analytic stress distribution of rotating polar orthotropic disk. The stress distributions for typical GFRP and CFRP disks and the maximum allowable speeds subjected to a constraint of tensile strength are presented in addition to polycarbonate disk. The results show that the application of CFRP to rotating disk can increase the maximum allowable rotating speed but this may not be applicable to GFRP disk.

• Composites Research
• /
• v.12 no.4
• /
• pp.33-41
• /
• 1999

In this paper, a simple but accurate method of vibration analysis of structural elements with or without attached mass/masses is presented. The method used has been developed by D.H., Kim since 1974. This method is very effective for the plates with arbitrary conditions and irregular sections. This method is applied to the special orthotropic plate with two opposite edges simply supported and the other two opposite edges free. Such plate represents the most of the simply supported bridges/decks, including concrete and girders-cross beam systems. Detailed illustration is given for beams and plates for easy understanding. Some laminate orientation for which the special orthotropic equations can be applied are identified.

• Composites Research
• /
• v.12 no.4
• /
• pp.25-32
• /
• 1999

A method of calculating the natural frequency corresponding to the first mode of vibration of beams and tower structures, with irregular cross sections and with arbitrary boundary conditions was developed and reported by Kim, D. H. in 1974. In this paper, the result of application of this method to the special orthotropic plates on elastic foundation with free boundaries is presented. Such plates represent the concrete highway slab and hybrid composite pavement on bridges. Any method may be used to obtain the deflection influence surfaces needed for this vibration analysis. Finite difference method is used for this purpose, in this paper. The influence of the modulus of the foundation and the aspect ratio of the plate on the natural frequency is thoroughly studied. The effect of neglecting the mass of the plates on the natural frequency, as the ratio of the point mass/masses to the plate mass increases, is also studied, in deep.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.38-46
• /
• 1999

In this paper, two methods were proposed to improve the performance of adaptive feedback cancellation in hearing aids. One is “Orthogonality principle acoustic feedback cancellation method(Orthogonality principle method)” to track optimal solution with monitoring the instantaneous gradient, the other is a method using the CLMS algorithm(CLMS method). In many simulation conditions, adaptive feedback cancellation method proposed in this paper was much better than Greenberg method by Sum-method LMS algorithm which is known the most excellent method by now in case of system mismatch, SNR and segmental SMR. Also. Orthogonality principle method is as good as CLMS method in terms of adaptive feedback cancellation in many simulation conditions.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.121-127
• /
• 2001

While SVD and Gaussian elimination method were applied to the additive damped least squares(DLS), the convergence and the stability of the optimization process were examined in a triplet-type camera lens-system where the condition number is well conditioned. DLS with SVD method generated a suitable merit function but this merit function may be trapped in a local minimum by the nonlinearity of error function. Therefore, the least camera lens-system was further designed by the global optimization method is grid method, and this method is adopted to get merit function that convergent to global minimum without local minimum trapping.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.997-1003
• /
• 2000

When finite length signal is the input of QMF banks which are composed of the M-band orthogonal wavelet filter, the boundaries of reconstructed signal are not reconstructed perfectly. For boundary signals to be reconstructed perfectly, different type filters or methods are applied to them. In this paper, the design method of boundary filters which can be reconstructed the boundary signal perfectly was proposed, in case the dimension of M-band decomposed signal is the same as that of input signal. The boundary filters were designed using the perfect reconstruction condition of paraunitary matrix. In an application of subband coding of still image, the proposed boundary filters achieve better PSNR about 5% in reconstructed image than reflected method at the same bit rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.2
• /
• pp.109-116
• /
• 2014

In this paper, we propose a frequency reuse method for efficient frequency use of multi-site weather radar. Our method uses a set of orthogonal pulse compression codes and CLEAN algorithm for sidelobe interference cancellation. Computer simulation results show that performance of proposed method meet performance requirements of [1], The current S-band weather radars in South Korea use the 8 different frequency channels to avoid interference. Using proposed method, number of occupied channels can reduce from 8 to 1, the 7 frequency channels may be use for other services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7A
• /
• pp.720-726
• /
• 2008

In this paper, we propose a multi-cell cooperation method for broadcast packet data services in the orthogonal frequency division multiplexing (OFDM)-based cellular system with multiple transmit antennas. In the proposed method, to transmit two streams of spatially demultiplexed or transmit diversity coded symbols over a number of transmit antennas, we divide a coded packet into multiple subparts to which different cell groups and antenna pairs are assigned. The proposed method enhances the diversity order by transforming the channel frequency responses of two symbol streams in each subpart of the broadcast packet. The increase in diversity of the proposed method is shown with the outage probability under various configurations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.40-45
• /
• 2008

This paper proposes the signal design techniques of quasi-orthogonal space time block codes (QO-STBCS) on the multi-dimensional signal space. In the multiple antenna system(MIMO), QO-STBC achieves the full-diversity and full-rate by grouping two based-symbols. We study the condition for the full-diversity of the grouping QO-STBC geometrically and the performance analysis of codes on the multi-dimensional signal space regarding the various signal constellations. Simulation results show that the way of the performance analysis is validity.