• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.555-558
• /
• 2010

This paper presents a design of solid rocket motor with high length to diameter applied composite propellant. Solid rocket motor with high L/D ratio can be generated erosive burning and combustion instability on longitudinal mode. Especially, Erosive burning can effectively prolong the initial pressure spike in some star grain motors. That is, the study shows design of grain, internal ballistics and structural analysis in order to perform system requirements.

• Journal of Mushroom
• /
• v.12 no.4
• /
• pp.258-262
• /
• 2014

We aim to elucidate suitable mixed color of light during development of fruit body in Pleurotus ostreatus. The four mixed color of LED(Light Emitting Diode), blue and white, green and white, blue and green and green and red LED, were irradiated for formation of fruit-body. First, as effect of mixed color of LED, the properties of fruit body of P. ostreatus in blue and white LED irradiation were showed higher commercial yields than those in control(fluorescent lamp). And the ergothioneine was the highest at the blue and white LED. Second, we could obtain higher commercial yields than those at the $1{\mu}mol/m^2/s$ of light intensity by blue and white LED in P. ostreatus.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.47-47
• /
• 2003

Abstract: RF Birdcage Resonator는 높은 자장 균질성과 신호 대 잡음비의 특성이 좋음으로 인해 MRI와 MRS 연구에 보편적으로 사용되고 있다. 본 연구는 인체를 비롯한 동물실험을 위한 다양한 실험대상에 따라 코일의 크기를 예측하여 Birdcage Resonator를 개발하였다. Unloaded와 Loaded 상태에서의 전기적인 성향을 Lumped Element Circuit Theory를 따라 일반적인 분석을 하였을 뿐 아니라 실제적인 실험을 통한 분석도 하였다. Introduction: Birdcage Resonator 는 자장 균일성이 뛰어나고 신호대잡음비가 좋아 Magnetic Resonance Imaging과 Spectroscopy에 유용하게 사용되어지고 있다. 이 연구에서는 실험대상에 따른 여러 가지의 Birdcage Resonator를 개발하기 위해 Lumped Element Circuit Theory를 사용한 일반적인 이론적 방법론을 이용하여 코일을 분석하였을 뿐 아니라 실제 제작한 후 실험을 통한 실질적인 영상분석도 병행하여 진행하였다. Method: 실질적인 개발에 앞서 Lumped Element Circuit Theory를 통해 이론적인 분석으로부터 나온 여러 parameter들을 정리하였다. 제작 후 실험적인 분석은 Network Analyzer (HP 4195A, 미국)를 통한 1차적인 분석을 한 후 최종적으로 3T MRI 장비 (메디너스, 한국)에서 수행하였다. 제작된 Birdcage Resonator의 종류는 기본적으로 Low-Pass Filter를 적용한 12-column 구조이다. 각각의 직경과 element의 길이는 다음과 같다. 1) 직경 13cm, element의 길이 22cm, 2) 직경 15cm, element의 길이 22cm, 3) 직경 17 cm, element의 길이 25cm. Result and Discussion: 여러 parameter들을 이론적으로 계산하여 실제 Birdcage Resonator를 제작하여 실험적인 분석을 한 결과 많은 차이가 있음을 알 수 있었다. 그 이유는 이론적인 계산에서는 생각되지 않았던 요인들이 실제 제작에 있어서는 많은 영향을 미쳤기 때문인 것이다. Network Analyzer를 통한 1차적인 분석 후에도 실제의 Magnet Field내에서 또 다시 차이가 나는 것 또한 같은 이유에서이다. 그러므로 Birdcage Resonator 제작에 있어서 이러한 여러 요인들을 충분히 고려하여야 할 것이다. Acknowledgement: 본 연구는 2002 년도 한국과학재단 목적기초연구사업 (과제번호 : R0l-2002-000-00294-0 (2002) 지원아래 수행되었다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.65-69
• /
• 2002

The objective of this study was to determine mushrooms yields using ozone. The results of this study showed as follows; 1. According to ozone treatment on the Pleurotus ostreatus growth length of stipe became short, diameter of stipe and pileus yields of fruiting body increase 7% than the control treatments. 2. According to ozone treatment on the Agaricus bisporus growth, length of stipe became short, diameter of stipe and pileus became large, yields of fruiting body had increase 4% than the contol treatment. 3. According to ozone treatment on the Flamulina velutipes growth, day required for primordial formation after inoculation(DPI) became late for 2 days.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.6
• /
• pp.19-26
• /
• 2014

A ground hot-firing test (HFT) was carried out to make a close examination into the pressure instability for the 70 N-class hydrazine thruster under development. Monopropellant grade hydrazine was adopted as a propellant for the HFT, and catalyst-bed was filled with $Ir/Al_2O_3$ catalyst. In order to investigate the effects of thrust-chamber diameter on combustion stability, evaluation tests for the development models were performed on three kinds of lower thrust chambers having the length-to-diameter ratio (L/D) of 1.03, 1.13, and 1.26. As results, it was found that low frequency instability (~ 50 Hz) was inherent in the models, and in addition, increase of the L/D and decrease of the operating pressure led to an amplification of pressure oscillation in the test condition specified.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.3
• /
• pp.69-76
• /
• 2012

An achieving method of highly progressive pressure gradient is presented to enhance the missile ejection system's performance by using a gas generator in the condition of preventing erosive burning. To obtain and confirm a stable burning, a ground burning test was performed to evaluate the new methods of a radial-hole and a multi-row propellant grain. The test results show that a radial-hole grain takes good effect on erosive burning and not on ejection performance. On the other hand, a multi-row grain which reduces the length-to-diameter ratio(L/D) of grain is very effective to prevent the erosive burning and to enhance the ejection performance simultaneously.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.432-439
• /
• 2011

An achieving method of highly progressive pressure gradient is presented to enhance the missile ejection system's performance by using a gas generator in the condition of preventing erosive burning. To obtain and confirm a stable burning, a ground burning test was performed to evaluate the new methods of a radial-hole and a multi-row propellant grain. The test results show that a radial-hole grain takes good effect on erosive burning and not on ejection performance. On the other hand, a multi-row grain which reduces the legnth-to-diameter ratio(L/D) of grain is very effective to prevent the erosive burning and to enhance the ejection performance simultaneously.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.320-324
• /
• 2017

Effect of elliptical orifice on the spray characteristics of liquid jet ejecting into subsonic crossflows were experimentally studied. Circular/elliptical plain-orifice injectors, which had different ratios of the orifice length to diameter and major axis to minor axis, were used for transverse injection. Compared with the previous research, breakup lengths of elliptical nozzles are shorter than circular nozzles at all experimental condition. Cavitation/hydraulic flip are considered as a reduction in the breakup length at all circular/elliptical nozzle. In the case of liquid column trajectories, major axis which was placed to the crossflows, increases the frontal area of the liquid column exposed to the crossflows. Hence, the aerodynamic force exerted on the jet is increased and the penetration depth is reduced.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.7
• /
• pp.957-966
• /
• 2000

The effect of rotation on the discharge coefficient of orifices with various length-to-diameter ratios and two different inlet corner radii was studied. Length-to-diameter ratios of the orifices range from 0.2 to 10, while the inlet shapes are square edged, or round edges of radius-to-diameter ratio of 0.5. From the experiment, we found that rotational discharge coefficient and Rotation number, when based on ideal exit velocity of the orifice considering momentum transfer from the rotor, describe the effect of rotation very well. In this study, the discharge coefficients of rotating orifices are shown to behave similar to those of the well-known non-rotating orifices. For both rotating and non-rotating orifices, the discharge coefficients increase with the length-to-diameter ratio until a maximum is reached. The flow reattachments in the relatively short orifices are responsible for the increase. The coefficient then decreases with the length-to-diameter ratio due to the friction loss along the orifice bore. The length-to-diameter ratio that yields maximum discharge coefficient, however, increases with the Rotation number because the increased flow-approaching angle requires larger length-to-diameter ratio for complete reattachment. The length-to-diameter ratio for complete reattachment is shorter for round edged orifices than that of square edged orifices by about a unit length-to-diameter ratio.

• Journal of Korean Society of Forest Science
• /
• v.69 no.1
• /
• pp.1-5
• /
• 1985

Growth characters such as height, DBH, crown width, branch length and branch diameter were measured from 23 clones of plus trees of Pinus koraiensis. The results were as follows; 1) Differences between the largest and smallest clones were amounted to 41% in height, 81% in DBH, 50% in crown width, 55% in branch length and 83% in branch diameter. 2) There were significant differences between clones in every growth characters and correlation coefficients between growth characters were positive and significant ($r=0.418^*{\sim}0.917^{**}$). 3) The broad sense heritabilities were 0.46 for height, 0.45 for DBH, 0.28 for crown width, 0.26 for branch length and 0.18 for branch diameter. 4) The genetic gains predicted for each characters were ranged from 4.1% to 11.1%, when selecting the best 3 out of 23 clones.