• Journal of Korea Water Resources Association
• /
• v.30 no.3
• /
• pp.211-223
• /
• 1997

This study was focused on the investigation of the distribution of trees which is an important factor for the improvement of the river environment, and the experimental examination of resistant force of trees to the external forces. The investigation of plant distribution performed in 11 major rivers in Korea showed that the willow family grows spontaneously over the whole country. The field experiments on the resistant force of trees were carried out on the 78 trees of 8 species in 3 different sites to estimate whether pulled out trees damage downstream hydraulic structure. The experiments were performed by the method that a backhoe drew trees and the forces were measured when the trees were overturned and pulled out. The analysis of the experimental results showed that there is a linear correlation between the resistant force and DHB (diameter at breast height).

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.485-490
• /
• 2007

The purpose in having a control rod on a buoy system is to control the motion of it. The system may be composed entirely of a single circular cylinder and a long mooring anchor cable. A control rod has one function to perform in meeting its purpose, and that is to develop a control force in consequence of its orientation and movement relative to the water. The forces and moments generated as a result of the effects of mutual interference. then determine the stability characteristics of the body. In this paper, the study of control-rod-attached buoy's 2-dimensional section was accomplished. model tests and numerical simulations had been carried out with different diameters of control rods. and varying the Reynolds number $Re=5,000{\sim}25,000$ based on the cylinder diameter(D=50mm) to predict the performance of the body and the 2 frame particle tracking method Iud been used to obtain the velocity distribution in the flow field. 50mm circular cylinder Iud been used during the whole experiments and measured results had been compared with each other.

• Journal of Plant Biology
• /
• v.34 no.1
• /
• pp.67-75
• /
• 1991

Anatomical study of the secondary xylem in Malvales plants, including four families, five genera and ten species grown in Korea, was carried out to elucidate relationship among genera or families in the order. Wood of Elaeocarpus is diffuse porous and shows angular vessels in radial multiples of 2-14 cells and a few apotracheal or paratracheal parenchyma. Tiliaceous genera have diffuse porous wood, vessels in solitary distribution and apotracheal parenchyma of sinuous scalariform uniseriate band. In the family, Tilia shows angular vessel. noded and tile-like cell in ray and storied tissue but Grewia has circular vessel. Hibiscus shows ring porous wood, circular solitary vessel and biseriate band of apotracheal and paratracheal parenchyma. Firmiana shows ring porous wood, circular solitary vessel and confluent parenchyma. Many starch grains appear in ray and axial parenchyma. Judging from arrangement, shape, length and diameter of vessel element and angle of end wall to vessel axis, and arrangement and shape of axial parenchyma, the lines of specialization in these genera are from primitive Elaeocarpaceae through less primitive Tiliaceae and less advanced Malvaceae to advanced Sterculiaceae.iaceae.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.97-97
• /
• 2010

많은 플라즈마 공정 중에 건식 식각은 복잡하고 표면반응이 잘 알려지지 않은 등의 이유로 가장 어려운 분야 중의 하나이다. 이러한 이유로 식각 장치 디자인뿐만 아니라 플라즈마를 이용한 건식 식각의 공정 조건은 수많은 시행착오를 통해 시도되어 왔다. 이런 문제들을 극복하기 위해 많은 연구자들에 의해서 다양한 방법과 tool을 이용해 모델링이 시도되고 있다. 본 연구에서는 $CF_4$ 가스를 이용한 유도결합 플라즈마에 의해 Si와 $SiO_2$를 식각하는 것을 상용 프로그램인 전산모사 유체역학 시뮬레이터인 CFD-ACE+를 이용하여 모델링했다. 150 mm 직경의 웨이퍼에 대한 모델은 식각 속도 실험결과와 비교 하였다. Ar의 경우 20 mTorr에서 13.56 MHz, 500 W인가 시 2.0 eV의 전자온도와 $7.3{\times}10^{11}\;cm^{-3}$의 전자밀도가 계산결과와 상당히 일치하게 측정되었고, $CF_4$를 이용한 $SiO_2$ 식각에서도 식각 속도가 평균 190 nm/min로 일치했고 식각 균일도는 3% 였다. 450 mm 웨이퍼 공정용 장치의 모델 계산 결과에서는 안테나와 기판의 거리, 챔버의 단면적, 기판 지지대와 배기구와의 높이 등 기하학적인 구조와 각 안테나 턴의 위치 및 전류비가 플라즈마 균일도에 많은 영향을 주었으며, 안쪽부터 4 turn이 있는 경우 2번째, 4번째 turn에만 1:4의 전류비를 인가했을 때, 수십%의 전자밀도의 불균일도를 4.7%까지 낮출 수 있었다. 또한, Si 식각에서는 식각 속도의 분포가 F radical의 분포와 같은 경향을 보임을 확인했고, $SiO_2$ 식각에서는 전자 밀도의 분포와 일치함을 확인함으로써 균일한 식각을 위해서 두 물질의 식각 공정에서는 다른 접근의 시도가 필요함을 확인했다. 플라즈마의 준중성 조건을 이용해서 Poisson 방정식을 풀지 않고 sheath를 해석적 모델로 처리하는 방법과, Poisson 식으로 정전기장을 푸는 방법을 통해서 입사 이온의 에너지 분포를 비교하였다. 에너지 범위는 80~120 eV로 같지만, 실험에서는 IED가 낮은 에너지 쪽이 더 높게 측정됐고, 계산 결과에서는 높은 에너지 쪽이 높았다.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.456-460
• /
• 1999

The YHB radial distribution functions of a linear gas molecule CO were calculated by a computer within the Stockmayer molecular potential molel, which assumed thc CO molecule as a simple dipolar molecule. To examine the validity of the obtained YHB radial distribution of CO gas molecule, the density dependent pressures of CO at several temperatures were also calculated. The calculated pressures showed a good agreement with literially known experimental CO pressure data. The temperatures examined were 273, 298, and 373 K and the densities were up to $0.013/{\AA}^3$ (maximum pressure = 1000 atm). Since the calculated pressures showed a good agreement with the experimental values, the obtained YHB radial distribution functions of CO molecule seemed good enough to obtain and predict various equilibrium physical and chemical quantities of CO molecule sensitive to density such as pressure. It was also found that in CO gas system the dipole-dipole interaction is effective up to approximately 2.5 molecular diameter.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.1
• /
• pp.51-61
• /
• 2013

This paper presents results from a study undertaken to quantitatively evaluate the geotextile pore sizes using optical image analysis. The evaluation was conducted by observing surfaces of coupons cut from resin-impregnated specimens of geotextile-geomembrane layered under various load conditions. Stereological concepts were applied to collect representative specimens from a series of laboratory tests. The sizes of voids enclosed by filaments were expressed in terms of the largest inscribing opening size (LIOS) distribution. The opening diameter corresponding to the 50% cumulative frequency decreased by about 45mm as the load increased from 10 to 300kPa and recovered to about 90% of its initial state on unloading back to 10kPa. The average void size was reduced by 32 and 16.5% as the geotextile was sheared against a textured geomembrane under normal stresses of 100 and 300kPa, respectively. The results showed how the LIOS distribution varied as a function of normal stress and interface shear displacement against a smooth and a textured geomembrane surfaces.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.27-27
• /
• 2019

본 연구는 멸종위기 아고산수종 구상나무의 보존 복원을 위한 유전다양성을 고려한 표본추출전략을 구명하는데 그 목적이 있다. 2019년 9월에 한라산 영실 집단($14,000m^2$)에서 총 152개체를 대상으로 선발된 10개의 nSSR 마커를 이용하여 유전다양성 및 공간적 유전구조를 분석하였다. 평균 유전다양성은 관찰된 대립유전자수(A)가 7.2개, 유효대립유전자수($A_e$)가 3.6개, 이형접합도 관찰치($H_o$)가 0.528, 이형접합도 기대치($H_e$)가 0.595이며, 고정지수(F)는 0.071 이었다. 조사구내 구상나무 성목 152개체는 평균 수고 3.6 m, 흉고직경 17.3 cm로 나타났다. 구상나무의 개체목간 평균거리는 3.94 m, 임분밀도는 700 본/ha 이며 개체의 공간적 분포는 임의분포 형태로 나타났다. 구상나무의 유전변이에 대한 공간적 자기상관성(spatial autocorrelation) 분석 결과, 조사구의 구상나무는 약 15 m 이내에서 분포하는 개체들 간 유전적 유사성이 있게 분포하는 것으로 나타났으며 임분밀도가 높고 수고가 낮은 특성으로 인하여 비교적 작은 유전군락이 형성된 것으로 사료된다. 결과적으로 영실의 구상나무 집단의 보존 복원을 위한 표본추출전략은 15 m의 간격을 두고 개체를 선발하는 것이 타당한 것으로 나타났다.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.421-426
• /
• 2015

The objective of this paper is to look into the growth of Cryptomeria japonica stand in South Korea along with the evaluation on their yields, followed by their carbon stocks and removals. A total of 106 sample plots were selected from Jeonnam, Gyeongnam, and Jeju, where the groups of standard are grown. We only used 92 plots data except outlier. As part of the analysis, the Weibull diameter distribution was applied. In order to estimate the diameter distribution, the growth estimation equation for each of the growth factors including the height, the diameter at breast height, and the basal area was drafted out and the verification for each equation was examined. The site index for figuring out the forest productivity of Cryptomeria japonica stand for each district was also developed as a Schumacher model and 30yr was used as a reference age for the estimation of the site index. It was found that the site index for Cryptomeria japonica stand in South Korea ranges from 10 to 16 and this result was used as a standard for developing the stand yield table. According to the site 14 in the stand yield table, the mean annual increment (MAI) of the Cryptomeria japonica reaches $7.6m^3/ha$ on its 25yr and its growing stock is estimated to be at $190.1m^3/ha$. This volume is about $20m^3$ as high as that of the Chamaesyparis obtusa. Furthermore, the annual carbon absorptions for a Cryptomeria japonica stand reached the peak at 25yr, which is 2.14 tC/ha/yr, $7.83tCO_2/ha/yr$. When compared to the other conifers, this rate is slightly higher than that of a Chamaecyparis obtusa ($7.5tCO_2/ha/yr$) but lower than that of the Pinus koraiensis ($10.4tCO_2/ha/yr$) and Larix kaempferi ($11.2tCO_2/ha/yr$). With such research result as a base, it is necessary to come up with the ways to enhance the utilization of Cryptomeria japonica as timbers, besides making use of their growth data.

• Journal of Korean Society of Forest Science
• /
• v.95 no.1
• /
• pp.102-112
• /
• 2006

The change of species composition and stand structure along altitudinal gradients in different aged stands was studied in five natural stands located each at 400 m, 800 m, 1,000 m, and two at 1,300 m above sea level (asl) in the western part of Mt. Chiri in Korea. Trees larger than 2.5 cm DBH were inventoried in 3 to 8 $20m{\times}20m$ quadrats in each study site. Stand ages were estimated based on the ages of Pinus densiflora Siebold & Zucc. and Abies koreana Wilson, and used to analyze the changes in species composition and stand structure including diameter and height distributions. Species composition was changed along altitudinal gradients as P. densiflora dominated stands at 400 m asl while A. koreana dominated stands at 1,300 m asl. Major species of Quercus also changed along altitudinal gradients as Quercus variabilis Blume at 400 m asl, Quercus serrata Thunb. ex Murray at 800 m asl, and Quercus mongolica Fisch. ex Ledeb. at higher than 1,000 m asl. The diameter distribution did not show significant differences among stands of different altitudes. However, the height distributions of upper crown layers were significantly different among stands at below and above 1,000 m as) (P < 0.0001). Trees taller than 20 m rarely appeared in stands over 1,000 m asl. P. densiflora dominant stands at 400 m asl developed two clumped age groups as one in 30-40 ages and the other around 70 years old. Q. serrata dominant stands at 800 m asl, Q. mongolica dominant stands at 1,300 m asl and A. koreana dominant stands at 1,300 m asl were estimated to be around 30, 70, and over 140 years old after major disturbances, respectively. The diameter distribution with age structure indicated that P. densiflora at 1,300 m asl might be replaced by Q. mongolica, and Q. mongolica might be replaced by A. koreana and Pinus koraiensis later. A. koreana dominant stand seemed to stay its dominance quite long if the large disturbance would be absent.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.28-40
• /
• 2010

Purpose: The aim of this retrospective study was to provide long-term data about the correlation between multifactorial local factors and the survival of implants. Material and methods: During 19 years (1991 to 2009), 2796 implants were placed in 879 patients. From dental charts and radiographs, the following data were collected: patient's age at implant placement, gender, implant system, surface, length, diameter, location of implant placement, bone quality, primary stability, type of prosthesis. The correlations between these data and implant survival were analyzed. Statistical analysis was performed using Kaplan-Meier survival analysis, Chi-square test, odds ratio. Results: 1. Among the 2796 implants, 150 implants failed that resulted in a cumulative survival rate of 94.64%. The cumulative survival rate of smooth surface implants (91.76%) was lower than rough surface implants (96.02%). 2. Anatomic location, implant surface, diameter of smooth surface implant, primary stability, type of prosthesis, patient's age and gender were significantly associated with implant survival (P < .05). 3. No significant difference in implant survival was found in relation to the following factors: implant length, bone quality, diameter of rough surface implants and type of rough surface according to implant manufacturer (P < .05). Conclusions: Local factors such as anatomic location, implant surface, diameter of smooth surface implant, primary stability and type of prosthesis have a significant effect on implant survival.