• Proceedings of the KIEE Conference
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2132-2134
• /
• 2000

Since surge arresters are recommended to protect the electric power system from the lighting surge, the impulse current is generally used to verify this requirement at the test labotaries. Recently, the international standard(IEC 60060-2) related to the impulse current techniques revised requiring a traceability of measuring system for impulse current measurements. In this paper, a shunt for impulse current is developed satisfing the revised IEC standard and the possibility of application has been investigated using step response.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제12권6호
• /
• pp.1246-1251
• /
• 1988

The experimental analysis method of stress intensity factors by "slab analogy" which was developed by authors proved itself effective to the determination of stress intensity factors of various shape of through cracks. Its experimental results, however, still has errors more or less 10% in comparison with known theoretical values. In this paper, a newly evaluating method, multi-point selection method, is presented by which these errors were decreased by more than 2%.e than 2%.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• 제45권2호
• /
• pp.283-288
• /
• 1996

This paper presents the development technology of standard shielded resistor divider for full lightning impulse voltage. The ability of large-capacity power apparatus to withstand lighting stroke is usually evaluated by means of full lightning impulse voltage. Lightning impulse voltage test has been essential to evaluate the insulation performance of electrical power apparatus. Recently international standard (IEC 60) on high voltage measurement techniques is being revised and requests a formal traceability of high voltage measurements. Therefore, general interest for this area has grown considerably during last years, and several international intercomparisons have already completed worldwide, i.e. Europe, Japan, America etc., In this viewpoint, we have also investigated the step response of the standard shielded resistor divider, which satisfies the IEC recommendation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.109-111
• /
• 2002

디스크 형의 회전자를 가지고 있는 영구자석 표면 부착형 동기 전동기에서 회전자가 중력 방향에 직각으로 서있고, 디스크 상에 부하가 존재하는 경우 디스크의 불균일한 질량 분포에 의해 편심이 발생한다. 편심 부하는 합성 무게 중심이 반중력 방향으로 향하면 전동기의 속도는 감소하고, 중력 방향이면 속도가 증가하는 정현적인 부하 토크로 작용하여 정현적 인 속도 오차를 발생시킨다. 이 속도 오차를 감소시키기 위해 q-축 전류와 측정된 속도를 입력으로 가지는 부하 토크 관측기를 설계하여 생성된 보상전류를 피드 포워드 방식으로 q-축 지령 전류에 보상하는 방식을 사용한다. 본 연구에서는 부하 토크 관측기를 사용하는 방식에서 발생하는 속도오차에 관하여 분석하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제15권11호
• /
• pp.1019-1025
• /
• 2004

The X-band 10${\times}$10 waveguide slot array antenna for SAR is designed, fabricated and measured. The array antenna is designed using the equivalent circuit model based on the field distribution of the dominant mode, TE$\sub$10/, and EM simulation. The method to decide optimum angle of the centered inclined slot(coupling slot) and the optimum of offset of the longitudinal slot(radiating slot) is provided. The designed antenna structure is EM simulated and fabricated. The measured return loss bandwidth is 180 MHz at 9.15 GHz , the side lobe level is below -25 dB, HPBW is about 9$^{\circ}$, and the gain is 25.5 dB. These results are similar to the simulation data.

• The Journal of the Acoustical Society of Korea
• /
• 제22권1호
• /
• pp.78-87
• /
• 2003

High-frequency (126-㎑) bottom backscattering measurements with various bottom types were conducted at the water tank in Ocean Acoustic Laboratory, Hanyang University. For the purpose of investigating the energy distribution of bottom scattering with various bottom types, the sediment was varied with gravel, sand, sandy mud and mixed bottoms. To examine the anisotropic nature of the scattering due to the orientations of bottom ripple, the footprints were made transverse and longitudinal to the direction of incident wave. The total scattering characteristics are that the larger grazing angles the larger backscattering strengths become and backscattering strengths for a transverse ripple case are higher than those of longitudinal ripple case. finally, the variations of scattering strength depend mainly on the ripple's orientation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.932-936
• /
• 2004

수제는 하천에서의 흐름 방향과 유속을 제어하여 하안 또는 제방을 유수에 의한 침식작용으로부터 보호하기 위해 호안 또는 하안 전면부에 설치하는 구조물이다. 수제를 설치하는 목적은 하안 및 제방의 보호, 유로의 제어, 그리고 수환경의 개선 등을 들 수 있다. 국내에는 해방 이후 수제의 시공 사례가 거의 없었으나, 최근 들어 자연형 하천파 하천생태계 복원에 대한 관심이 점증하면서 수제에 대한 관심이 커지고 있다. 그러나 현재 국내에는 수제설계에 대한 실증적인 지침이 미비하고 국외의 기준을 검증 없이 소개하는 수준이어서 현장의 설계단계에서 수제공의 채택을 망설이게 하는 원인이 되고 있다. 이 연구에서는 국내${\cdot}$외 수제의 현황과 기술 동향을 파악하여 수제의 기하학적 특성인 수제길이, 수제길이, 그리고 설치각도의 3가지 설계인자를 조합하여 실험을 실시하였다. LSPIV 기법을 적용하여 측정한 유속자료를 분석한 결과 수제역 내 평균유속이 유입부 유속에 비해 $40\%$ 이하로 감소하는 것을 관찰할 수 있었다. 유속성분을 통하여 수제역 내 와도 및 사분면 검토를 실시한 결과 수제역 내에서는 비교적 안정적인 수치를 보이고 있어 호안침식방지에 유리한 것으로 보인다. 수제의 길이가 하폭의 $15\%$ 이하인 경우 상향 또는 하향수제가, $20\%$ 이상인 경우 직각수제가 유리한 것으로 나타났다.

• Journal of Biomedical Engineering Research
• /
• 제10권1호
• /
• pp.33-42
• /
• 1989

The doppler effect is used for measuring the velocity of the blood flow in artery. Because of the range information, the pulsed doppler system is most commonly used. In this paper, we propose a new two-dimensional(2-D) pulsed Doppler system. Which uses second-order sampling method and serial processing. The proposed system using second-order sampling method eliminates in-phase, quadrature-phase balancing problem at demodulator of quadrature detection method. In addition, the new pulsed 2-D doppler system eliminates balancing problem of channels of 2-D doppler system because of serial processing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제37권12호
• /
• pp.1165-1172
• /
• 2009

The laminar boundary layer along a streamwise corner formed by two flat plates intersecting at right angle is measured by using Particle Image Velocimetry(PIV) technique. The free stream velocity ranges from 2.96m/s to 3.0m/s. The angle of incidence of the corner is set to 1.2 degree providing slightly favourable pressure gradient to ensure a laminar flow in the corner region. A round shape leading edge is used and the length of the model is about 1000mm. In the bisector plane, the measurement data show separation type velocity profiles having an inflection point which is a typical characteristic of laminar corner boundary layers. As the distance away from the bisector plane increases, velocity profiles are found to change into the Blasius profile. The change completes around half length of the boundary layer thickness in the bisector plane away from the bisector plane along the plate. In the bisector plane, the growth characteristic of the boundary layer thickness and the approximate similarity of velocity profiles are confirmed from the measurement data.

• Korean Journal of Optics and Photonics
• /
• 제12권4호
• /
• pp.305-311
• /
• 2001

The new and simple velocimetry model to be perpendicularly arranged with two optical systems with a projected and reduced rotatable line grating is so proposed as to withstand an external vibration. We measured successfully the various velocities (V_{chop}$) of a chopper by using the new velocimeter. As a result, when rotational angles of projected volume gratings in two optical systems are $\alpha=73^{\circ}$ and $\beta=73^{\circ}$, respectively, we measured successfully the chopper velocities within 1 % accuracy from $V_{chop}=43.52cm/s to 249.36cm/s$. In this new velocimetry, we can determine the confidence of .the system by comparing the z-component of velocity, to be measured in one optical system with $V_z$ to be measured in one optical system with $V_z^'$ to to be measured in another optical system, which should be same.e same.