• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.289-296
• /
• 2012

Due to the topographical and climatic features of Korea, there is a strong possibility of a landslide. Recently, many landslides, caused by the improper land development, frequently occured at the mountain area every summer. Cheonan has been recognized to be relatively safe against landslide, but with the increased risk factors, systematic analysis of the landslide is required. In this paper, the topographical features of Mt. Seonggo in Cheonan City were extracted using contour maps, and water courses and basin areas in heavy rain were computed using the results. Conclusively, Mt. Seonggo areas were relatively safe in the view points of the length of water courses and rain-inflow, but in case of some narrow areas, sustainedly observation was required. Meanwhile, a contour map is proper to analyze the risk of landslide in the 1'st level in that it is more cost effective than other types of digital map.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.908-912
• /
• 2006

Geology and terrain of Imha basin has a very weak characteristics to soil erosion, so much soil particles flow into Imha reservoir and bring about high density turbid water when it rains a lot. Especially, since the agricultural area of Imha basin is mainly located in river boundary, Imha reservoir has suffered from turbid water by soil erosion. Therefore, it is important to estimate the influence of soil erosion to establish efficient management of water-pollutant buffering zone for the reduction of turbid water. By applying GIS-based RUSLE model, this study can acquire 12.23% that is the ratio of soil erosion in water-pollutant buffering zone and is higher than area-ratio (9.95%) of water-pollutant buffering zone. This is why the area-ratio of agricultural district (27.24%) in water-pollutant buffering zone is higher than the area-ratio of agricultural district (14.96%) in Imha basin. Also as the result of soil erosion in sub-basin, Daegok basin shows highest soil erosion in water-pollutant buffering zone, second is Banbyeon_10 basin and last is Seosi basin.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.271-271
• /
• 2011

최근의 유출해석은 지리정보체계(GIS, Geographic Information System) 및 지형자료(DEM, Digital Elevation Model 등) 구축의 발달로 대부분 격자 기반의 분포형 강우-유출 모형을 통해 이루어지고 있으며, Rodriguez-Iturbe and Valdes (1979)에 의해 소개된 통계물리학적 접근방법인 지형학적 순간단위도(GIUH)모형 역시 DEM을 기반으로 한 연구가 꾸준히 진행되어 온 실정이다(Maidment, 1993; D'odorico and Rigon, 2003; Di Lazzaro, 2010). 이러한 격자 기반 모형들은 대부분 8방향 최급경사에 기초한 흐름방향도를 기반으로 물의 유동을 표현한다. 8방향법에 의해 결정된 흐름방향도를 이용할 경우 각 격자 중심에서 유역출구 까지의 배수로경로길이를 비교적 쉽고, 빠르게 계산할 수 있다는 장점을 가지나, 공간해상도(격자 규모)에 따라 상이한 결과를 나타내는 것을 예상할 수 있다. 따라서 본 연구에서는 DEM의 공간해상도에 따른 배수경로길이의 통계적 변화양상을 살펴보고, 이로부터 실제 수문사상의 통계적 특성과 Di Lazzaro(2010)의 특성유속산정 공식을 이용해 지표면과 하천의 특성유속을 산정하였다. 산정된 특성유속들을 D'odorico and Rigon(2003)이 제시한 값과 비교함으로써 격자 기반의 GIUH 모형의 적용에 있어서 적정 공간해상도를 찾고자 하였다. 대상유역으로는 국제수문개발계획(IHP, International Hydrological Project)의 금강수계 보청천 유역 중 이평수위국을 출구로하는 소유역을 선정하였으며, DEM의 공간해상도는 수치지형도의 축척을 고려하여 1: 5,000의 경우 5, 10, 15, 20m를, 1: 25,000의 경우 20, 30, 50, 100, 150, 200m로 결정하였다. 분석 결과 격자 형태 GIUH의 특성유속을 산정을 위한 적정 공간해상도는 1:5,000의 경우 5m를, 1:25,000의 경우에는 20～50m의 범위를 적용하는 것이 타당할 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.195-205
• /
• 1992

EIA(Environmental Impact Assessment) was introduced in 1979 by our gorvernment to cope with serious environmental problems. Recently environmental pollution has been controlled severely than ever because pollution phenomena became more comlpicated and arrcordingly the damage more terrible. For the EIA system to achieve its goal effectively, systematic and scientific approach should be found out. For this reason the techniqes such as GIS(Geographic Information System) and RS(Remote Sensing) come to front strongly. The purpose of this paper is to investigate the application techniqes of GIS and RS to the EIA system. Haw-Won Myen, Hae-Nam Gun, Chun-Nam and its related area, which will be developed to be a sightseeing area, were selected as the study area. Applications of GIS resulted some important outcome such as earthwork calculations, landuse models, aspect maps, stability of slanting surfaces, elevation models, estimation of real estates, etc. GIS applied EIA proved to be very useful for the project managers and planners to plan, evaluate, judge the enviormental problems.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.3
• /
• pp.91-101
• /
• 2010

As global warming has caused the number of abnormal changes in climate to increase throughout the world, much damage has occurred recently in Korean Peninsula which results from unexpected heavy rains, landslides, and floods from typhoons. To prevent and cope with these annually repeated natural hazards, the overall improvements are needed, including systematic management of the existing natural hazard information and improvement of hazard information. In this study, multi-purpose hazard information map based on digital image was constructed as an effective way to enhance hazard management considering regional characteristics and hazard response capabilities in the field. Multi-purpose hazard information map with a new concept by fusion of geospatial information and hazard attribute information is able to support quick decision for hazard management making and development of hazard information system.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2004.04a
• /
• pp.199-217
• /
• 2004

터널 설계에 있어 갱구부의 위치 및 갱문형식의 선정은 터널 및 갱구사면의 안정성뿐만 아니라, 주위환경과의 조화 및 자연환경 훼손 최소화 등과 같은 환경적인 측면에서도 매우 중요한 부분이다. 현행 국내의 경우 경제성과 시공성 위주의 갱구부 위치 선정으로 과다 절취구간이 발생되어 환경훼손, 민원문제 발생, 과다한 용지 매입비용 등의 여러 가지 부작용이 발생되고 있다. 또한, 갱문 형식의 선정에 있어서 갱구부의 지형여건 및 제반 환경적 영향을 고려하지 않고 원통절개형과 면벽식 갱문의 획일적인 적용으로 주변지형과의 부조화를 이루는 사례가 다수 발생하고 있으며, 갱구부 상단의 유실된 토석이 완충공간의 부족으로 도로 노면상에 낙하되는 사고가 발생하고 있어 그에 대한 대책이 필요한 실정이다. 이와 같은 문제점을 보완하기 위해 갱구부 절취구간 최소화를 위한 구체적인 최소토피고 기준을 마련하였으며, 갱구상단 지형경사의 완급, 갱문주위의 배수기능, 낙석${\cdot}$산사태 등의 발생가능성 등을 고려한 새로운 갱문형식을 제안하고 체계적인 검토를 수행하였다. 이를 통해 점차 강화되는 환경보호정책 방향에 부응하고 자연환경 훼손을 최소화하며, 특히 해빙기와 집중호우시 낙석${\cdot}$눈사태로부터 도로의 안전을 확보할 수 있는 터널 갱문부 설계기준을 제시하였다. 또한, 실제 고속도로 터널의 설계 적용사례를 통하여 본 설계기준의 적용성을 분석하였으며, 실제 갱문 시공사례를 소개하여 향후 설계 및 시공에 도움이 되고자 하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.141-151
• /
• 1995

In generating DTM as basic data to GIS, the use of existing map is difficult to aquire current data and the method using airphotos needs cost for stereoplotting and ground control surveying. So, the method of DTM generation by satellite imagery is promising because satellite is able to observe wide area at once. In this study the program for SPOT bundle adjustment and image matching based on Coarse to Fine method is developed and various image enhancement algorithm is used for more accurate DTM generation and also evaluation of accuracy was carried out. Further more, orthophoto, a bird's eye-view, contour map producing, net-work analysis and terrain analysis were performed for GIS applications using generated DTM in this study. Generated DTM using SPOT stereo imagery is useful for GIS applications such as automated mapping, facility management, national geographic information system. Moreover developed automatic DTM generation pro-gram is studied, tested and verified more to be applicable to all the area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.401-408
• /
• 2009

A study for 3D-reconstruction and providing the geospatial information is in progress to many fields recently. For efficient providing the geospatial information, the present information has to be updated and be revised and then the latest geospatial information needs to be acquired economically. Especially, LiDAR system utilized in many study has a advantage to collect the 3D spacial data easily and densely that is possible to supply to the geospatial information. The 3D data of LiDAR is very suitable as a data for presenting 3D space, but in case of using the data without converting, the high performance processor is needed for presenting 2D forms from point data composed by 3D data. In comparison, basically the raster data structure of 2D form is more efficient than vector structure in cheap devices because of a simple structure and process speed. The purpose of this study, in case of supplying LiDAR data as 3D data, present the method that reconstructs to 2D raster data and convert to compression data applied by th tree construction in detail.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.45-51
• /
• 2009

Different countries around the world, using their traditional culture as a background, are promoting new changes and reformation in development and publicity method of cultural contents to promote national interests and to increase their competitiveness. Also, as the citizen's standard of living and quality of living goes up, various demands for the enjoyment of traditional culture goes up accordingly as well. As the cultural assets environment become more complicated and diverse, there is a need for systematic management and preservation plan. Keeping these viewpoints in mind, the geo-spatial information provision service using the web provides various forms of services such as satellite imagery, terrain, and 3D viewing, enabling the user to gain concrete spatial information on specific areas. The geo-spatial information using 3D modeling is done only in limited spaces because of construction expenses or difficulties in management and maintenance. In this thesis, I would like to propose Effective method for the GoogleEarth Uploading through simplification of 3D object for the publicity of traditional buildings and Cultural Resources and Tourist Attractions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.135-140
• /
• 2015

The Cyber-Physical Systems (CPS) complexly perform modeling and simulation (M&S) for the various embedded systems. In this case, due to use diverse formatted models, we suggest to apply with the SEDRIS to systematically manage the different formatted data on M&S. The SEDRIS can reduce time and cost with reusing and interoperating environment data developed in the specific domain. To do this, we should input the data transformed the height map for terrain representation in a simulator into raster data of SEDRIS for which interoperate between the existed simulator and the SEDRIS. To solve the problem, we propose the transformation method to transfer the polygon data from RAW file used in terrain representation. With the proposed method, we can provide two advantages. First, it can possibly express the environment data into SEDRIS. Second, we can see the terrain like an image file through a viewer. Therefore, even non-expert easily constructs the terrain environment data.