• Journal of Industrial Technology
• /
• v.19
• /
• pp.155-162
• /
• 1999

In the last few years the automatic classification of morpholgical landforms using GSIS and DEM was investigated. Particular emphasis has been put on the morphological point attribute approaches and the extraction of drainage basin variables from digital elevation models. The automated derivation of landforms has become a neccessity for quantitative analysis in geomorphology. Furthermore, the application of GSIS technologies has become an important tool for data management and numerical data analysis for purpose of geomorphological mapping. A process developed by Dikau et al, which automates Hanmond's manual process, was applied to the pyoung chang of the kangwon. Although it produced a classification that has good resemblance to the landforms in the area, it had some problems. For example, it produced a progressive zonation when landform changes from plains to mountains, it does not distinguish open valleys from a plains mountain interface, and it was affected by micro relief. Although automating existing quantitative manual processes is an important step in the evolution automation, definition may need to be calibrated since the attributes are oftem measured differently. A new process is presented that partly solves these problems.

• Journal of the Korean Geographical Society
• /
• v.32 no.4
• /
• pp.435-444
• /
• 1997

Bars in a river bed show the flow of the river, the shape of a river bar can be easily measured in any river. The purpose of this study is to research the morphological characteristics of river bars. The case study area is the lower Golgi River, six bars were examined. All six bars are gravel bars with a grain size in excess of 2 millimeters. Four of the bars are longitudinal bars, in which the direction of the bar follows the river current. After analyzing the gravel in the bars, it was determined that as the gravel flows down the river, gravel grain size decreases while grain roundness increases. The shape of bar varies locally according to flow regime, channel slope, and w/d ratio.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.3
• /
• pp.83-92
• /
• 2011

The properties and changes of geomorphic relief and coastal deposits were analyzed at Goreabul sand beach in Yeongdeok-gun, the largest that in east coast of Kyungsangbuk-do Province. As the result of grain size analysis, in almost season except summer, the sands mainly deposited in Goraebul sand beach because longshore current drift northward contrary to Gangwon-do east coast, and summer longshore current is weak or change direction to south ward. Sand beach mostly came form erosion owing to typoon and storm and was deposit more coarse sand in the summer, and was produced deposition actively in the fall and winter. Front side of sand dune came from deposition on sand every season by sea breeze, especially in the winter.

• Journal of the Korean Geographical Society
• /
• v.46 no.6
• /
• pp.693-706
• /
• 2011

The Geomorphological properties and ages of river-mouth bar at Song-cheon River in the East Coast of Korea, Yeongdeok-gun, Gyeongbuk Province are estimated, and the long-term and short-term changing processes and causes are analyzed. Sand grains of the bar near the coastline show the finer trends from south to north and these can be attributed to the northward movement of waves and long-shore currents. The absolute ages of bar and nearby coastal sand dune are less than approximately 100 years ago, indicating that the bar has experienced the active geomorphological changes. While the inlet located at south part of the bar between 1971 and 1995, the inlet has located at north or middle part since 1995. These may caused by the changes of movement directions of waves and long-shore currents due to the apparent northward movements of winds and currents. In short-term, the higher elevation, larger area, simpler landform relief and more variable location of inlet and morphology of bar can be observed between September and March due to the dominance of sedimentary processes by wave and wind processes.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.207-212
• /
• 2008

Bathymetry, side scan sonar, and magnetic survey data for the summit area of Dokdo obtained by Korea Ocean Research & Development Institute in 1999, 2004, and 2007 were analyzed to investigate the geophysical characteristics of the summit. Bathymetry and topographic data for the summit of Dokdo show uneven seabed and irregular undulations from costal line to -90 m in water depth, indicating the effects of partial erosions and taluses. The stepped slope in the bathymetry is supposed to be a coastal terrace suggesting repetition of transgressions and regressions in the Quaternary. The bathymetry and the side scan sonar data show a small crater, assumed to be formed by post volcanisms, at depth of $-100\;{\sim}\;-120\;m$ in the northeastern and the northwestern parts of the survey area. Except some areas with shallow sand sedimentary deposits, there are rocky seafloor and lack of sediments in the side scan sonar images of the survey area, dominantly. The analytic signal of the magnetic anomaly coincides with other geophysical results regarding to the location of the residual crater. The geophysical constraints of the summit of Dokdo propose that the islets and the rocky seabed elongated northeastward and northwestward from the islets might be the southern crater of the Dokdo volcano.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.1
• /
• pp.66-77
• /
• 2005

We have investigated microclimatic controls on the spatiotemporal variations of net primary production (NPP) of a rugged forested watershed using the process-based biogeochemical model (BIOME-BGC). To validate the model simulation of water and carbon cycles at the plot scale, we have conducted field survey over deciduous broadleaf forest (DBF) and evergreen needleleaf forest (ENF) since 2000. The modeled values of soil temperature, soil moisture and soil respiration showed high correlation with those from the field measurements. The modeled seasonal changes of NPP showed high correlation with air temperature but no significant correlation with water related parameters. The precipitation frequency turned out to be the best climatic factor to explain the annual variation of NPP. Furthermore, NPP of ENF was more sensitive to precipitation frequency than that of DBF. With changes in vegetation cover and topography, the spatial distribution of NPP was of great heterogeneity, which was negatively correlated with the magnitude of NPP. Despite the annual precipitation of 1,400mm, NPP at the study site was constrained by the amount of water available for the vegetation. Such a modeling result should be verified by the field measurements.

• Korean Journal of Remote Sensing
• /
• v.28 no.4
• /
• pp.393-407
• /
• 2012

This study focuses on the correction of topographic effects caused by a combination of solar elevation and azimuth, and topographic relief in single optical remote sensing imagery, and by a combination of changes in position of the sun and topographic relief in comparative analysis of multi-temporal imageries. For the Jeju Island, Republic of Korea, where Mt. Halla and various cinder cones are located, a Landsat 7 ETM+ imagery and ASTER GDEM data were used to normalize the topographic effects on the imagery, using two topographic normalization methods: cosine correction assuming a Lambertian condition and assuming a non-Lambertian c-correction, with kernel sizes of $3{\times}3$, $5{\times}5$, $7{\times}7$, and $9{\times}9$ pixels. The effects of each correction method and kernel size were then evaluated. The c-correction with a kernel size of $7{\times}7$ produced the best result in the case of a land area with various land-cover types. For a land-cover type of forest extracted from an unsupervised classification result using the ISODATA method, the c-correction with a kernel size of $9{\times}9$ produced the best result, and this topographic normalization for a single land cover type yielded better compensation for topographic effects than in the case of an area with various land-cover types. In applying the relative radiometric normalization to topographically normalized three multi-temporal imageries, more invariant spectral reflectance was obtained for infrared bands and the spectral reflectance patterns were preserved in visible bands, compared with un-normalized imageries. The results show that c-correction considering the remaining reflectance energy from adjacent topography or imperfect atmospheric correction yielded superior normalization results than cosine correction. The normalization results were also improved by increasing the kernel size to compensate for vertical and horizontal errors, and for displacement between satellite imagery and ASTER GDEM.

• Spatial Information Research
• /
• v.7 no.1
• /
• pp.1-12
• /
• 1999

The DTM(Digital Terrain Model) in GIS(Geographical Information System) shows the elevation from interpolation using data points surveyed. In panoramic flat landform, pixel size, resolution of source data may not be the problem in using DTM However, in mountainous landform like Korea, appropriate resolution accuracy of source data are important factors to represent the topography concerned. In this study, the difference in contour interval of source data, the resolution after interpolation, and different data structures were compared to figure out the accuracy of slope calculation using DTM from the topographic maps of Togyusan National Park Two types of GIS softwares, Idrisi(grid) ver. 2.0 using the altitude matrices and ArcView(TIN) ver. 3.0a using TIN were used for this purpose. After the analysis the conclusions are as follows: 1) The coarser resolution, the more smoothing effect inrepresenting the topography. 2) The coarser resolution the more difference between the grid-based Idrisi and the TIN-based ArcView. 3) Based on the comparison analysis of error for 30 points from clustering, there is not much difference among 10, 20, 30 m resolution in TIM-based Airview ranging from 4.9 to 6.2n However, the coarser resolution the more error for elevation and slope in the grid-based Idrisi. ranging from 6.3 to 10.9m. 4) Both Idrisi and ArcView could net consider breaklines of lanform like hilltops, valley bottoms.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.10-20
• /
• 2005

The change of stream creation has a very sensitive effect on runoff analysis model using the divergence characteristic of stream. Therefore, in this study, the threshold area of stream creation was examined the change characteristic of topographical parameters. The subject basin of the research was the upper basin of the Kumho water gage station which is located in the middle of the Kumho river. The 1:25,000 numerical geography which was constructed $10{\times}10m$ mesh was used. The range of investigation of topographical parameters are number of stream order, length, area, slope, basin relief, sinuosity ratio, drainage density and total stream length etc. It was found from the result of analysis that the threshold value of 1st order stream has a very big effect on topographical parameters of basin. It was found that the threshold area of stream creation was under $0.10km^2$, the parameters showed a big change but showed a very small change over $0.10km^2$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.1
• /
• pp.67-74
• /
• 1998

This paper performed terrain analysis using DTM(digital terrain model) with TIN/ GRID structure on PC environment. Contour layer from 1:5,000 scale map was used to produce DTM. DTHs were produced with and without considering breakline for each data structure. Processing time, file size, mean elevation and standard variation were analyzed for each DTM. slope map, aspect map were analyzed for grid structure with consideration of TEX>$5\times{5m},\;l0\times{10m},\;15\times{15m},\;l0\times{30m},\;45\times{45m},\;60\times{60m}$ cell size respectively. The results suggest following; The incorporation of breakline does improve mapping accuracy for highly disturbed landscape, Mean elevation doesn't increase as the grid size increases, while processing time, storage room is significantly lessened. Thus, the optimal grid size must be determined in advance for efficient application. slope decreases, while aspect increases as grid size is increasing.