• Journal of Wetlands Research
• /
• v.23 no.2
• /
• pp.154-162
• /
• 2021

The naturally opened Han river estuary is a place where the flows of the Han river, Imjin river, Yaesung river meet with West Sea of Korea, so the hydrodynamic mechanism(Impact-Response) structure of Han river estuary is complex. Continuous observation and measurement due to the morphological characteristics at the estuary are required to maintain the estuary environment and river management facilities. However, the Sannam wetland(the study area) is in the military operation area. Therefore, Sannam wetland has the limited access under the control from military office. In 2020, there had a natural disaster due to flooding in August and COVID-19, and it made a survey hard. The noncontact survey technique, the analysis of LANDSAT images at Sannam wetland, was applied to analyze riverbed fluctuation and morphological transformation around Sannam wetland. LANDSAT images obtained from EarthExplorer, USGS and analyzed by QGIS. The analysis was performed based on the area and the distance near Sannam wetland. As a result, an erosion was happened on the downstream of the study area, and the upstream of the study area did not have any serious sediment transport. Considering the resolution of LANDSAT images, this noncontect survey technique is applicable to manage the study area. From the analysis of LANDSAT images, it is assumed that the tidal effect is greater than the inflow from the upstream. The pattern change of tidal response causes the damage of the river facilities near the Hangang river estuary.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.169-187
• /
• 2020

In Korea, Switzerland has been known as a country that integrates the Cadastral System (hereafter as CS.) and the registration system(hereafter as RS.) according to a research report by the Ministry of Home Affairs since 1975. However, I found that Switzerland's CS. and RS. were separately managed by the Dept. of Defense, Civil Protection & Sports(hereafter as DDPS.) and the Dept. of Justice & Police(hereafter as DJP.). Therefore, I have a question about where is the institution in charge of the CS. and RS. in Switzerland, what are the relevant laws and regulations, and what are the related public records, and the background and purpose of this study is to resolve this. Research Results First, cadastral affairs are handled by the Cadastral Surveying Division at the Federal Office for Topography (Swisstopo) under the DDPS, and the registered affairs are handled by the Private Law Division at the Federal Office for Justice under the DJP. Second, Cadastral-related laws include 'VAV' and 'TVAV' newly enacted in 1993, and Registration-related laws include 'Civil Act(ZGB)' and 'Order on Land Registration(GbVO)' etc. which have been in effect since 1912. Third, the cadastral record includes the Cadastral Books, Cadastral Maps & Numerical Cadastral Books etc, and the register includes the Hauptbuch, Tagebuch, Pläne, Liegenschaftsbeschreibung etc. It is hoped that the results of this study will provide an accurate understanding of the fact that Switzerland's CS. is managed separately by the DDPS, and the RS. is managed by the DJP.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.905-910
• /
• 2013

Road facility has the high possibility of being damaged or destroyed due to continuous pass of the vehicles, overloaded vehicles, traffic accidents and so on and stormwater manhole, sewerage manhole that are installed on the road may cause the functional degradation in case of periodic pavement of the road. So management through establishing DB of road facility and efficient updating plan are required. Thus, this study used DGPS camera for efficient establishment and improvement of road facility DB. Applicability of DGPS camera could be suggested by satisfying the allowable accuracy required for establishing DB of road facility through the comparative analysis with the result of establishment of existing road facility DB and the process of DB establishment by existing total solution could be improved through process analysis. And the existing DB of road facility was improved so that the present conditions of surrounding topography and road facility can be grasped by developing the module that can add the images of road facility to digital map and Google Earth-based KML Builder. It is expected that road facility service that provides various information can be available if the spatial data of each local self-governing body and study of automation that utilizes DGPS camera images are accomplished hereafter.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.1
• /
• pp.69-74
• /
• 2015

To analyze quantitatively environmental characteristics of cultivation area of citrus, Satsuma mandarin (Citrus unshiu Marc.), we made digital maps of environmental elements such as topography and climate. Elevation, degree of slope, and slope aspect were selected as elements of topological environment, and the annual mean air temperature, annual total precipitation, mean air temperature on January, extreme value of daily minimum air temperature, and the number of days below $-5^{\circ}C$ were selected as elements of climatic environments. The grid values of 8 environmental elements were extracted by shape of citrus farm area and analyzed distribution patterns. We can determine 3 agroclimatic criteria for growing Satsuma mandarin as over $14.5^{\circ}C$ of annual mean air temperature, over $-10.0^{\circ}C$ of extreme value of daily minimum air temperature, and less 5 days of below $-5^{\circ}C$ of daily minimum air temperature.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.587-599
• /
• 2023

As climate change increasesthe frequency and risk of flooding in major cities around theworld, the importance ofsimulation technology that can quickly and accurately analyze high-resolution 2D flooding information in large-scale areasis emerging. The physically-based approaches based on the Shallow Water Equations (SWE) often requires huge computer resources hindering high-resolution flood prediction. This study investigated the theoretical background of Weighted Cellular Automata 2D (WCA2D), which simulates spatio-temporal changes offlooding using transition rules and weight-based system, and assessed feasibility to simulate pluvial flooding in the urbancatchment, theOncheon-cheon catchmentinBusan, SouthKorea.Inaddition,the computation performancewas compared by applying versions using OpenComputing Language (OpenCL) andOpenMulti-Processing (OpenMP) parallel computing techniques. Simulationresultsshowed that the maximuminundation depthmap by theWCA2Dmodel cansimilarly reproduce historical inundation maps. Also, it can precisely simulate spatio-temporal changes of flooding extent in the urban catchment with complex topographic characteristics. For computation efficiency, parallel computing schemes, theOpenCLandOpenMP, improved the computation by about 8~14 and 5~6 folds respectively, compared to the sequential computation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.809-813
• /
• 2004

강우시 유역 내에서 발생하는 수문특성을 구명하고자 하는 연구는 지속적으로 진행되고 있다. 특히 최근 몇년간 집중호우로 인한 홍수피해가 매우 실각한 수준으로 발생하였고, 이에 지방 소하천을 포함한 전국의 하천정비사업이 새로운 설계홍수빈도를 토대로 진행되고 있다. 우리나라의 강우특성은 여름철에 편중되는 특성을 지니고 있어 홍수시의 홍수방어 대책 등 치수에 많은 어려움이 있는 것이 현실이다. 집중호우로 인한 피해는 전 세계적인 문제로 제기되고 있으며, 이에 강우-유출 관계를 규명하고자 하는 노력이 지속적으로 이루어지고 있다. 강우-유출과정은 시간적, 공간적 다변성을 지닌 수문학적 인자에 의해 좌우되기 때문에 이러한 문제를 해결하기 위해 다년간의 강우-유출 자료를 바탕으로 알고리즘을 생성하고, 이를 바탕으로 정확한 모의가 가능한 수문 모형 및 시스템들을 개발하는데 노력을 기울이고 있다(심순보 등, 1998, 신사철 등, 2002). 그러나 이러한 모형들은 많은 매개변수와 다양한 정보들을 필요로 하게 되어 이들을 처리하는데 많은 어려움이 따른다. 따라서 최근에는 GIS(Geographical Information System)를 활용하여 유역과 분수계를 결정하고 하천형태학적인 특성인자를 추출하는 자동화된 유역정보 추출기술 개발에 대한 관심이 집중되고 있다(Bhaskar, 1992, Francisco, 1995, Yeon, 1999). 이에 본 연구에서는 GIS기법을 이용하여 지형자료로부터 하천연장, 배수면적, 지체시간, 도달시간 등 유역내의 분포형 수문매개변수를 추출하였고 추출된 매개변수를 통해 강우-유출식을 적용하여 분포형 유출량을 산정하는데 활용하고자 한다.ansverse Mercatro) 지구좌표계의 DEM 자료로 변환하였다. 또한 유역의 고도차를 이용한 흐름특성 분석을 위해 수치고도자료를 이용하여 유역흐름특성을 분석할 수 있는 TOPAZ(Topographic PArameteri-Zation) 프로그램을 이용하였다. TOPAZ 프로그램을 통해 분석된 각 격자별 분포형 수문 매개변수는 적합한 관계식을 통해 분포형 유출량을 모의하는데 적용된다.다 정확한 유입량 예측이 가능할 것으로 사료된다.이 작은 오차를 발생하였으며, 전체적으로 퍼프 모형이 입자모형보다는 훨씬 적은 수의 계산을 통해서도 작은 오차를 나타낼 수 있다는 것을 알 수 있었다. 그러나 Gaussian 분포를 갖는 퍼프모형은 전단흐름에서의 긴 유선형 농도분포를 모의할 수 없었고, 이에 관한 오차는 전단계수가 증가함에 따라 비선형적으로 증가하였다. 향후, 보다 다양한 흐름영역에서 장${\cdot}$단점 분석 및 오차해석을 수행한 후에 각각의 Lagrangian 모형의 장점만을 갖는 모형결합 방법을 제시할 수 있을 것으로 판단된다.mm/$m^{2}$로 감소한 소견을 보였다. 승모판 성형술은 전 승모판엽 탈출증이 있는 두 환아에서 동시에 시행하였다. 수술 후 1년 내 시행한 심초음파에서 모든 환아에서 단지 경등도 이하의 승모판 폐쇄 부전 소견을 보였다. 수술 후 조기 사망은 없었으며, 합병증으로는 유미흉이 한 명에서 있었다. 술 후 10개월째 허혈성 확장성 심근증이 호전되지 않아 Dor 술식을 시행한 후 사망한 예를 제외한 나머지 6명은 특이 증상 없이 정상 생활 중이다 결론: 좌관상동맥 페동맥이상 기시증은 드물기는 하나, 영유

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.445-454
• /
• 2009

Localized unprecedented torrential rain and heavy rainfall cause repeated damages and make it difficult to detect and predict the landslide caused by heavy rainfall. To analyze the landslide characteristics of Inje area this study used satellite images photographed after the occurrence of landslide caused by the typhoon Ewiniar occurred in July, 2006, and for GIS analysis purpose, interpreted the satellite images (SPOT5) visually to digitize into developing parts, water traveling parts and sediment parts. For analysis of spatial characteristics, landslide areas obtained from visual interpretation of digital map, 3rd & 4th forest vegetation maps and detailed soil map and grids were overlaid and analyzed. As a result, in regard to topographic features, landslide occurred at places, of which average slope is $26.34^{\circ}$, had south, south-east, south-west aspects and average altitude of 627m. From hydrological analysis, it was found out that water traveling area rapidly spread approaching water traveling area and sediment area. From forest type analysis, it was found out that landslide occurrence was high in pine woods, and in terms of girth class attribute, landslide occurred in small-sized woods, in which the crown occupancy of trees that have the diameter at breast height, 6~16cm, was greater than 50%. From the analysis of soil series, landslide areas constitute 37.85% of OdF and 37.35% of SmF, which had sandy loam soil and excellent drainage capacity. Through this study, landslides in Inje area were characterized and SPOT5 images of 2.5m resolution could be used. But there was a difficulty in determining water traveling parts adjacent to urban area.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.3
• /
• pp.146-157
• /
• 2019

One of the most distinctive features of the South Korean rural environment is that the variation of weather or climate is large even within a small area due to complex terrains. The Geospatial Schemes based on Topo-Climatology (GSTP) was developed to simulate such variations effectively. In the present study, we reviewed the progress of the geospatial schemes for production of farm-scale agricultural weather data. Efforts have been made to improve the GSTP since 2000s. The schemes were used to provide climate information based on the current normal year and future climate scenarios at a landscape scale. The digital climate maps for the normal year include the maps of the monthly minimum temperature, maximum temperature, precipitation, and solar radiation in the past 30 years at 30 m or 270 m spatial resolution. Based on these digital climate maps, future climate change scenario maps were also produced at the high spatial resolution. These maps have been used for climate change impact assessment at the field scale by reprocessing them and transforming them into various forms. In the 2010s, the GSTP model was used to produce information for farm-specific weather conditions and weather forecast data on a landscape scale. The microclimate models of which the GSTP model consists have been improved to provide detailed weather condition data based on daily weather observation data in recent development. Using such daily data, the Early warning service for agrometeorological hazard has been developed to provide weather forecasts in real-time by processing a digital forecast and mid-term weather forecast data (KMA) at 30 m spatial resolution. Currently, daily minimum temperature, maximum temperature, precipitation, solar radiation quantity, and the duration of sunshine are forecasted as detailed weather conditions and forecast information. Moreover, based on farm-specific past-current-future weather information, growth information for various crops and agrometeorological disaster forecasts have been produced.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.51-58
• /
• 2011

This paper describes a development of system that enables the user to manage and display from 3D viewer after at real-time saves attribute informations in DBMS using RTK systems and 3D game engines. The 3-dimensional game engines for this system will be input a attribute values of underground utilities which is measured from RTK systems with wireless network. This system which sees does to make be a possibility of managing creation, elimination, modification for the underground utilities from 3-dimensional viewer. The coordinates about the underground utilities measures with GPS. The base reference point for RTK systems uses one in reference points which are measured in existing. GPS coordinates revised a reference point in standard. The 3-dimensional game engines are having the function which manages the underground utilities with 3-dimensions. The function is the same as wireless network of RTK systems, 3-dimensional display for terrain and underground utilities, input and registration for attribute of underground utilities, etc. The system which sees will be able to prevent the various accident which is caused by in the spatial location coordinate which underground utilities is inaccurate. And the system which sees is accurate is a possibility of managing and the application possibility is high very. Finally, this system could be applied very usefully from the point of view which starts a new town development.

• Tunnel and Underground Space
• /
• v.22 no.6
• /
• pp.412-428
• /
• 2012

To achieve mine development, a large amount of data concerned with the geological structure and the ore body had to be investigated and collected through geological survey, drilling and geophysical explorations. In most previous cases, however, the data were usually analyzed two dimensionally and those results showed some limits because of their 2D presentation. Those 2D maps such as geological plane sections or longitudinal sections cause lots of difficulties in understanding the complex geological structure or the feature of ore body in a spatial way. In this study, research area was set on the abandoned Yangyang iron mine in Korea and the Sugaeng ore body within the mine was selected as the research target to design a mine haulage system for reopening. A 3D mine model of this area was tried to be constructed using a 3D modelling software, GEMS. An accurate 3D model including the ore body, the geological structure, the old underground mine drifts and the new mine drifts was constructed under the purpose of reopening of the abandoned iron mine. Especially, mine design for trackless haulage system was conducted. New inclines and drifts were planned and modelled 3 dimensionally considering the utilization of old drifts and shaft. In addition to the 3D modelling, geostatistical technique was adopted to generate a spatial distribution of the ore grade and the rock physical properties. 3D model would be able to contribute in solving problems such as evaluating ore reserves, planning the mine development and additional explorations and changing the development plans, etc.