• Title/Summary/Keyword: 지하횡단구조물

Search Result 13, Processing Time 0.023 seconds

Excavation Design and Vibration Analysis for the Crossing Under a Railway Station (정거장 구조물 횡단 굴착 설계 및 진동 해석)

  • ;;Reijo Riekkola
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 1998.10a
    • /
    • pp.505-512
    • /
    • 1998
  • 지하철과 같은 지하구조물 설계시 기존 구조물 지하를 관통하는 경우가 있다. 본 논문은 기존 역사의 바닥슬래브 밑에 새로운 지하철용 박스 구조물 상부 슬래브가 위치하게 되는 특별한 경우의 굴착 방법을 제시하고 제시된 굴착방법이 상부 구조물에 어떤 영향을 미치는지를 FLAC을 이용하여 검토해 본 것이다. 기존 구조물이 위치하고 있는 지반이 경암인 경우 발파가 주의 깊게 설계되고 시행된다면 발파로 인한 상부 구조의 진동 영향은 충분히 제어할 수 있는 수준으로 예상되었다.

  • PDF

Problems and Improvement Plans of River-Crossing Structures (하천횡단구조물의 문제점과 개선방안)

  • Kim, Ki Heung;Jung, Hye Ryeon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.568-572
    • /
    • 2015
  • 하천횡단구조물은 하천을 횡단하는 시설물로, 크게 농업용수 취수용 보, 하도개수시 유속제어를 위한 낙차공 등을 들 수 있으며, 각각의 설치목적에 따라 그 형태와 설계제원(높이, 마루폭, 바닥보호공의 길이 등)이 다르나, 하천을 횡단하여 인공적인 구조물을 설치하는 형태는 동일하다. 따라서, 하천횡단구조물은 홍수시 배수위 영향으로 상류에 수위상승을 초래하여 하천의 치수 안전도를 저하시킬 뿐 아니라 직하류에서는 하상의 세굴에 의하여 호안 및 제방이 파괴되는 경우도 빈번하게 발생하고 있다. 또한, 하천횡단구조물은 생태계의 이동통로로서의 종적 연속성을 차단하는 것이다. 즉 하천을 따라 거슬러 올라가는 소하성 어종(anadromous species)이나 하천에서 바다로 내려가는 강하성 어종(catadromous species)과 같은 회유성 어종의 이동을 차단하기도 하며, 회유성 어종 이외에도 치어와 성어의 성장환경이 다른 어종의 경우는 상 중 하류를 옮겨가며 성장하는 어종의 이동도 차단하고 있다. 하천횡단구조물은 치 이수적 측면에서 반드시 필요한 하천구조물로서 치수, 생태 및 경관의 측면에서 여러 가지 문제점을 가지고 있으나 지금까지는 어도설치나 기능을 상실한 보의 철거 등 소극적인 수준에 머무르고 있기에 적극적인 개선대책이 필요한 실정이다. 따라서, 하천횡단구조물로 인한 문제점을 파악하기 위하여 경남의 20개 시 군 684개의 지방 하천에 설치된 7,725개의 하천횡단구조물에 대한 전수조사를 실시하고, 구조형식, 높이, 재료, 어도 설치 여부, 세굴현황 등을 분석하였다. 하천횡단구조물의 용도별 구성비는 보가 49%, 낙차공이 51%로 나타났으며, 구조형식은 콘크리트 구조가 72%, 콘크리트 석재 구조가 25%, 석재 구조가 3%인 것으로 분석되었다. 또한, 하천횡단구조물의 본체 높이별 구성비는 0.5m 이하가 14%, 0.5~1.0m가 35%, 1.0~1.5m가 34%, 1.5~2.0m가 10%, 2.0m 이상이 7%인 것으로 조사되었다. 어도 설치는 약 9%인 669개소에 설치되어 있었으나 대부분이 어류 등의 이용하는 생태통로 기능을 발휘할 수 없는 것으로 분석되었다. 따라서, 이러한 문제점을 해결하기 위해서 하폭, 하상고, 하상경사, 굴입정도, 유사량 등의 하도특성 및 용수이용 여건 등을 고려하여 유공관을 이용한 지하보, 석재 아치의 원리를 이용한 계단식 자연형 보/낙차공, 부분 램프 설치, 거석 놓기 등의 개선방안을 제안하였다. 제안된 개선방안은 하천복원 및 하천개수 사업 시행시에 반영하여 합리적인 하천복원 및 관리에 활용될 수 있을 것이다.

  • PDF

Development of Underground Facilities Management System on Subway Construction (지하철공사를 위한 지하매설물관리시스템 개발)

  • 강인준;장용구;정영미
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.15 no.1
    • /
    • pp.75-80
    • /
    • 1997
  • In other to construct a subway, we have to consider the position of the subway and acquisition of a topography, profile-map, cross-map, underground facilities map. All information of underground is demanded accurate location in other to prevent of accident of underground in subway construction. We must think about water lines, sewer lines, electronic lines, telephone lines, all urban gas-line because these are needed construction the subway. And attributes of underground facilities recorded on topography are characteristics. length, width. number, position, and depth of the lines. We have to record these attributes because these are very important to design map on subway construction. If we develop GIS (Geographic Information System) to use the exact in-formation of the underground facilities, we can be management safely and prevent very dangerous accident as fast as possible. In this study, attribute informations are linked geographic informations about underground facilities and we can develop Underground Facilities Management System(UFMS) to analysis dangerous region through dangerous degreed and predict accident range with these informations.

  • PDF

Proposal for Specification of Counter-measurement in Frost-Heave System in Railway Underpass Box Structures in North Korea Considering Climate Condition (북한지역 기후조건을 고려한 철도횡단구조물의 동상방지방안 제시)

  • Kim, Mun-Su;Cho, Kook-Hwan
    • Journal of the Korean Society for Railway
    • /
    • v.20 no.1
    • /
    • pp.99-110
    • /
    • 2017
  • As a part of several Eurasian initiatives, the Korean government is trying to reconnect railways through North Korea to the Asian continent. If South Korea could build a network using railway, it would be a chance to develop a robust economic environment and to motivate economic growth. In the railway reconnection project between North and South Korea, the most important part of the railway roadbed sector is repair or improvement, and then construction of a new line through North Korea. There are not many big differences in the geological conditions; however, climate condition varies greatly during winter. The most significant condition in the safety of railway operation is frost-heaving. However, since South Korea has a relatively mild climate condition compared with North Korea, design and construction specifications under severe weather conditions in winter have not been prepared. This study proposes a plan for revising the railway design standard for underpass structures through an analysis of international standards, leading to site construction to prevent frost-heave.

한국전력공사 전력연구원 "BOX 구조물자동화 설계시스템(BOXCAD)"에 대한 소개

  • 송영철;우상균
    • Computational Structural Engineering
    • /
    • v.10 no.2
    • /
    • pp.34-39
    • /
    • 1997
  • BOXCAD Vㄷㄱ.2.00의 개발을 통하여 얻은 결론은 다음과 같다. 1) 다양한 설계조건 즉 설계차량하중, 토피, 지하수위, 사용재료의 강도 등의 변화에도 쉽게 자동화설계가 가능하도록 설계시스템이 개발되었다. 2) 개발된 설계시스템은 도로교 표준시방서와 콘크리트 시방서의 하중계수에 의한 방법을 모두 포함하고 있으며, 설계시방서에 따른 변화에도 신속하고 용이하게 대처할 수 있도록 개발되었다. 3) 개발된 본 설계시스템에 국부적인 기하조건, 설계하중, 구조세목만 보완하면 전력구 외에도 발전소의 배수 BOX구조, 도로 및 철도 횡단용 BOX구조, 지하차도 및 보도, 하수도 및 배수 BOX구조, 분류하수관거, 지하철 BOX구조 등의 자동화설계에도 작용할 수 있도록 시스템이 구축되었다. 4) 본 연구에서 개발된 자동설계시스템은 단면의 산정, 설계도면의 제작기능은 물론 설계 정보의 데이터베이스 기능이 있으므로, 실무에서 활용할 경우 설계도면 재료량 산출 및 설계정보의 효율적인 관리가 가능할 것으로 사료된다.

  • PDF

Safety Evaluation Method for Ground Ammunition and Explosive Storage Facilities due to Underground Tunnel Blast (지하시설 굴착공사에 따른 탄약저장시설 안전성 평가방법 연구)

  • Park, Sangwoo;Kim, Kuk-Joo;Park, Young-Jun
    • Journal of the Korea Institute of Building Construction
    • /
    • v.19 no.4
    • /
    • pp.331-339
    • /
    • 2019
  • Recently, expansion of urban and social infrastructures is planned to go through the transfer of military facilities or crossing the infrastructures via underground tunnels. However, when crossing facilities such as ammunition and explosive storages, a high level of safety assessment is required to prevent an accidental explosion of ground ammunition. In this study, a case study was conducted to evaluate the effect of blasting for the construction of tunnel on the ground ammunition facilities. The design section of Sinansan train operated by the Korea Railroad Authority with agreement of the Ministry of National Defense was selected. For the purpose of this study, the vibration velocity due to explosion was predicted by using GTS-NX, a numerical analysis program. Through literature review, it was confirmed that the vibration velocity of 0.2cm/sec can be a safety evaluation standard. These safety evaluation indicators and procedures used in this study can be utilized as an index of safety evaluation in the planning of social infrastructures that cross the ammunition facilities in the future.

Early Ontogeny of Vasuclar Cambium in Cotyledonary Node of Ginkgo biloba L. Seedlings (은행나무(Ginkgo biloba L.) 유식물의 자엽절에서 유관속형성층의 초기발생)

  • 소웅영
    • Journal of Plant Biology
    • /
    • v.35 no.4
    • /
    • pp.359-364
    • /
    • 1992
  • The vascular cambium in Ginkgo biloba seedling began to differentiate in the cotyledonary node, and then the differentiation proceeded bidirectionally from the cotyledonary node toward the stem and root. In tangential view, procambium at the early developmental stage was a homogeneous structure consisted of almost similar cells in shape, and at the later stage the procambium became a heterogeneous one consisted of long cells and short cells. Such a differentiation pattern in the cotyledonary node was similar to that in the stem. However, it was different from that in the root. Fusiform initials and ray initials consisting the vascular cambium were originated from the long cells and the short cells, respectively. The long cells and the fusiform initials in the cotyledonary node were shorter and wider than those in the first internode.ernode.

  • PDF

A case study on perforation under Daejeon station building by Front-Jacking method (Front-Jacking공법에 의한 대전역사 하부 관통사례)

  • Kim, Yong-Il;Hwang, Nak-Yeon;Jeong, Du-Seok;Cha, Jong-Hwi;Lee, Nae-Yong
    • Proceedings of the Korean Society for Rock Mechanics Conference
    • /
    • 2006.03a
    • /
    • pp.195-203
    • /
    • 2006
  • The crossing construction under railroad have two methods which are cut and cover and trenchless method. first, cut and cover method is an extremely limited method concerning non-running time. Whereas, trenchless method is free from restriction such as train speed and running time, and has the strong points of safe and rapid construction. Front Jacking method, one of the trenchless methods, is frequently applied recently due to its stability during construction and vantage of assuring schedule reliability. The procedure is that after minimizing interlocking friction with structure and earth pressure due to jacking the small steel tube, pulling the precast box manufactured at the field in the ground using PC strand and hydraulic Jack. This method is able to be applied regardless of section size and length of box and condition of ground. And that is also pro-environmental. This paper presents the case of Daejeon E. W. perforate Road Project applied with the Front Jacking method.

  • PDF

Stress Release Zone Around Sub-structure Constructed by Non-open Cut Methods (비개착공법으로 건설된 지하구조물 주변 지반 응력이완영역 규명)

  • Seo, Ho-Sung;Cho, Kook-Hwan
    • Journal of the Korean Society for Railway
    • /
    • v.19 no.4
    • /
    • pp.480-488
    • /
    • 2016
  • For the development of areas around railway lines, subsurface construction using the non-open cut method under the railway has recently been increased. However, when a structure under a railway is constructed, the stress release of the ground is not considered an important factor in the design. In this study, laboratory tests were conducted to determine a zone of stress relaxation. Field tests using an inclinometer were performed to measure the horizontal displacement of the ground during non-open cut construction. The stress release zone and the subgrade stiffness were investigated by numerical analysis. The results of the laboratory tests indicated that the failure zone in the ground was similar to a Rankine's active earth pressure zone. The measured data from the inclinometer in the field tests showed that displacements started when a steel pipe was pushed into the ground. The results of numerical analysis show that lateral earth pressure was also close to Rankine's active earth pressure. The roadbed support stiffness of the soil around the structure decreased to 40% of the original value. The ground around the subsurface structure constructed using nonopen cut methods should be reinforced to maintain the running stability of train.

A Case Study on Construction of Front-Jacking method in Daejeon E.W. perforate Road Project (대전 동서관통도로 Front-Jacking공법 시공사례)

  • Kim Yong-Il;Hwang Nak-Yeon;Cha Jong-Whi;Jang Sung-Wook;Lee Nai-Yong
    • Proceedings of the KSR Conference
    • /
    • 2005.05a
    • /
    • pp.646-654
    • /
    • 2005
  • The crossing construction under railroad have two methods which are cut and cover and trenchless method. First, cut and cover method is an extremely limited method concerning non-running time. Whereas, trenchless method is free from restriction such as train speed and running time, and has the strong points of safe and rapid construction. Front Jacking method, one of the trenchless methods, is frequently applied recently due to its stability during construction and vantage of assuring schedule reliability. The procedure is that after minimizing interlocking friction with structure and earth pressure due to jacking the small steel tube, pulling the precast box manufactured at the field in the ground using PC strand and hydraulic Jack. This method is able to be applied regardless of section size and length of box and condition of soil. And that is also pro-environmental. This paper presents the case of Daejeon E. W. perforate Road Project applied with the Front Jacking method.

  • PDF