• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.4
• /
• pp.274-279
• /
• 2009

To determine the critical level for optimum maturity of flue-cured tobacco leaves (KF118) at the stalk position from cutter to tips, the reflectance index using ground-based remote sensors and chlorophyll meter were investigated. The sensors estimated were Crop $Circle^{TM}$ (Holland Scientific), Green $Seeker^{TM}$ (Ntech Industries), Spectroradiometer (LICOR, LI-1800), Chlorophyll meter (SPAD502, Minolta), and Field $Scout^{TM}$ Chlorophyll meter (CM-1000, Spectrum). The L, a, b values and greenness for flue-cured leaf were measured and estimated for correlation with sensor's measurement of harvested leaf. On a reflectance curve of 340nm~1100 nm, the reflectance peaks on 550nm and 675 nm for the harvested leaf were lowered as change from light green to darker green. Darker green leaf harvested produced darker flue-cured leaf. The reflectance at 675 nm for flue-cured leaf decreased as greenness increased in the harvested leaf. This result means that the red edge band of 675 nm wavelength is related to the absorbance of chlorophyll for photosynthesis. The greenness of flue-cured leaf showed significantly positive correlation with the entire reflectance indexes for harvested leaf while the L value by colorimeter showed negative correlation with greenness of cured leaf. The critical level for optimum maturity of harvested leaf were less than 22, 135, and 0.43 for SPAD reading, CM-1000 reading, and gNDVI by Crop $Circle^{TM}$, respectively. Consequently, ground-based remote sensing providing a non-destructive real-time assessment of plant greenness could be a useful tool in the selection of optimum maturity of flue-cured tobacco leaves in relation to high quality of flue-cured tobacco.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.627-639
• /
• 2014

Accurate correction of surface effect from back scattered solar radiance is one of key issue to retrieve aerosol information from satellite measurements. In this study, two different methods are applied to retrieve surface reflectance by using single visible channel measurement from meteorological imager onboard COMS. The first one is minimum reflectance method, which composes the minimum value among previously measured reflectances at each pixel over a certain search window length. This method assumes that the darkest pixel corresponds to the aerosol-free condition, and deduces surface reflectance by correcting atmospheric scattering from the measured visible reflectance. The second method, named as the "atmospheric correction method" in this study, estimates the result by correcting aerosol and atmospheric scattering with ground-based observation of aerosol optical properties. The purpose of this study is to investigate the retrieval accuracy of the widelyused minimum reflectance method. Also, the retrieval error caused by the loading of background aerosol is mainly estimated. The comparison between surface reflectances retrieved from the two methods shows good agreement with the correlation coefficient of 0.87. However, the results from the minimum reflectance method are slightly overestimated than the values from the atmospheric correction method when surface reflectance is lower than 0.2. The average difference between the two results is 0.012 without the background aerosol correction. By considering the background aerosol effect, however, the difference is reduced to 0.010.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.318-322
• /
• 2009

광물탐사 과정 중에 원격탐사 기법을 도입하면 지표 광역조사를 보다 효율적으로 수행할 수 있다. 위성영상에서 특정 광물의 분포 위치와 분포량에 대한 분석을 수행하기 위해서는 대상 광물의 분광반사특성을 분류 기준으로 선정하여야 한다. 본 연구에서는 국내 광산 및 채석장에서 채취한 광물과 암석 시료를 이용하여 구성 광물을 분석하고 분광반사특성을 측정하였다. 다양한 위성영상들의 구성 밴드들에 대한 파장영역을 추출하고 측정된 분광반사특성 자료를 추출된 파장영역으로 재구성하여 광물 및 암석들의 고유한 분광특성들의 보존 유무에 대해 분석을 수행하였다.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.449-461
• /
• 2021

Analysis Ready Data (ARD) for optical satellite images represents a pre-processed product by applying spectral characteristics and viewing parameters for each sensor. The atmospheric correction is one of the fundamental and complicated topics, which helps to produce Top-of-Atmosphere (TOA) and Top-of-Canopy (TOC) reflectance from multi-spectral image sets. Most remote sensing software provides algorithms or processing schemes dedicated to those corrections of the Landsat-8 OLI sensors. Furthermore, Google Earth Engine (GEE), provides direct access to Landsat reflectance products, USGS-based ARD (USGS-ARD), on the cloud environment. We implemented the Orfeo ToolBox (OTB) atmospheric correction extension, an open-source remote sensing software for manipulating and analyzing high-resolution satellite images. This is the first tool because OTB has not provided calibration modules for any Landsat sensors. Using this extension software, we conducted the absolute atmospheric correction on the Landsat-8 OLI images of Railroad Valley, United States (RVUS) to validate their reflectance products using reflectance data sets of RVUS in the RadCalNet portal. The results showed that the reflectance products using the OTB extension for Landsat revealed a difference by less than 5% compared to RadCalNet RVUS data. In addition, we performed a comparative analysis with reflectance products obtained from other open-source tools such as a QGIS semi-automatic classification plugin and SAGA, besides USGS-ARD products. The reflectance products by the OTB extension showed a high consistency to those of USGS-ARD within the acceptable level in the measurement data range of the RadCalNet RVUS, compared to those of the other two open-source tools. In this study, the verification of the atmospheric calibration processor in OTB extension was carried out, and it proved the application possibility for other satellite sensors in the Compact Advanced Satellite (CAS)-500 or new optical satellites.

• Geophysics and Geophysical Exploration
• /
• v.4 no.2
• /
• pp.34-44
• /
• 2001

Forward modeling by construction of synthetic data is usually practiced in a horizontal surface and a few subsurface structures. However, in-situ surveys often take place in such topographic changes that the corrupted field data always make it difficult to interpret the right signals. To examine the propagation characteristic of elastic waves on the irregular surface, a general mesh generation code for finite element method was modified to consider the topography. By implementing this algorithm, the time domain modeling was practiced in some models with surface topography such as mound, channel, etc. The synthetic data obtained by receivers placed on surface also agreed with the analytic solution. The snapshots showing the total wave-field revealed the propagation characteristic of the elastic waves through complex subsurface structures and helped to identify the signals on the time traces. The transmission of Rayleigh waves along the surface, compressive waves, and sheer waves was observed. Moreover, it turned out that the Rayleigh waves behave like a new source at the edge.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1517-1522
• /
• 2023

This study evaluates the impact of Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol optical depth (AOD) expected error (EE) on the accuracy of surface reflectance (SR) derived from the KOMPSAT-3A satellite, utilizing the Second Simulation of the Satellite Signal in the Solar Spectrum Vector radiative transfer model. By considering a range of ground-based AOD and the resultant MODIS AOD EE, the research identifies significant influences on SR accuracy, particularly under high solar zenith angles(SZA) and shorter wavelengths. The study's simulations reveal that SR errors increase with shorter wavelengths and higher SZAs, highlighting the necessity for further research to improve atmospheric correction algorithms by incorporating wavelength and SZA considerations. Additionally, the study provides foundational data for better understanding the use of AOD data from other satellites in atmospheric correction processes and contributes to advancing atmospheric correction technologies.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.49-52
• /
• 1998

콘서트홀의 음향상태를 평가하기 위해서는 설문지를 통하여 주관적인 선호도를 조사하는 방법과 측정을 통하여 객관적인 지표를 뽑아내는 방법이 있다. 콘서트홀의 음향특성에 영향을 주는 가장 중요한 객관적 지표로서는 친밀도, 공간감, 잔향시간, 명료도, 음의 따뜻함, 라우드니스 등을 들 수가 있다. 국내에서 가장 대표적인 콘서트홀이라고 할 수 있는 예술의 전당 음악당에 대해서 위의 개관적 지표 중 5가지 요소를 실제 측정을 통해 추출하였다. 그 결과 예술의 전당 음악당은 친밀도와 공간감 면에서 조금 부족한 면을 보여 주었고 나머지 3가지 요소에 있어서는 클래식 연주에 적합한 콘서트홀로서의 결과를 보여 주었다. 공간감과 친밀도를 향상시키기 위해서는 음악당 천장에 반사판을 설치하는 것이 필요하다고 사료된다.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.121-132
• /
• 2005

To classify the surface sedimentary facies using IKONOS image collected over Hwangdo tidal flat in Cheonsu Bay, the optical reflectance was compared for characterizing various sedimentary environments such as grain size, tidal channel pattern and area ratio of surface remnant water. The intertidal DEM (Digital Elevation Model) was generated by echo-sounder for analyzing the relationship between IKONOS image and sedimentary environments including topography. The boundary of the optical reflectance between mud-mixed facies and sand facies was distinct, and discrimination of the associated sandbar feature was also possible. The mud-mixed facies coupled with intricate tidal channels is confined to the relatively hi호 topography of Hwangdo tidal flat. The boundary between mud and mixed flat was indistinct in IKONOS optical reflectance but it would have a difference in the area ratio of surface remnant water. The dark area in the image represented the well developed sand facies having a lot of surface remnant water due to the relatively low surface topography. The overall accuracy of characterizing the surface sediment facies by maximum likelihood classification method was 86.2 %. These results demonstrate that high spatial resolution satellite imagery such as IKONOS coupled with knowledge of grain size, surface remnant water and tidal channel network can be effectively used to characterize the surface sedimentary facies (mud, mixed and sand) network of the tidal flat environments.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.67-71
• /
• 2012

This paper represents the impact analysis results of antenna reflector for the UHF-band antenna of Space Launch Vehicle. Three types of UHF-band antenna reflector model have been proposed and simulated to compare their characteristics such as resonance frequency, reflection loss and radiation pattern etc. Simulation results showed that resonance frequency and return loss of each reflector models were rarely affected even if reflector sizes are changed. The antenna gain and 3dB bandwidth were slightly changed to the worse directions as the reflector sizes are smaller.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.20-24
• /
• 2007

센서의 광학 해상력에 따라 센서에 도달하는 에너지의 앙은 영상의 화소값으로 변환되므로，이 관계는 위성 영상의 정량적인 광학적 특성을 이해하기 위한 바탕이 되며，영상의 질을 유지하기 위한 척도가 되기도 한다. 위성영상의 광학적 특성은 ON 값 을 실제 지표물의 반사에너지 값인 Radiance와 Reflectance로 의 변환을 통하여 추정할 수 있으며，이러한 과정을 절대복사보정(Absolute Radiometric Calibration) 이라고 한다. 절대복사보정 과정에서 센서에 도달하는 태양 에너지의 양을 추정하기 위하여 복사전달모델이 사용된다. 태양 에너지가 대기를 통과함에 따라 여러 가지 상호 작용이 일어나게 되므로 복사 전달모델을 사용하기 위해서는 다양한 입력 변수가 필요하게 된다. 이러한 입력 변수로는 지표물의 반사율， 대기자료，그리고 센서의 특성 등이 포함되며， 이 연구에서는 KOMPSAT-2 위성의 MSC 영상의 절대복사보정 과정에서 복사전달모델의 결과에 영향을 미치는 입력 변수의 특성을 살펴보고자 한다.