• Economic and Environmental Geology
• /
• v.50 no.4
• /
• pp.303-311
• /
• 2017

The laboratory scale experiment was performed to evaluate the sealing capacity of the capping rock such as tuff and mudstone, measuring the intial supercritical $CO_2$ ($scCO_2$) injection pressure and the $scCO_2$-water-rock reaction for 90 days. The drilling cores sampled from 800 m in depth around the Janggi basin, Korea were used for the experiment. The mineralogical changes of mudstone and tuff were measured to evaluate the geochemical stability during the $scCO_2$-water-rock reaction at $CO_2$ storage condition (100 bar and $50^{\circ}C$). The rock core was fixed in the high pressurized stainless steel cell and was saturated with distilled water at 100 bar of pore water pressure. The effluent of the cell was connected to the large tank filled with 3 L of water and 2 L of $scCO_2$ at 100 bar, simulating the subsurface injection condition. The $scCO_2$ injection pressure, which was higher than 100 bar, was controlled at the influent port of the cell until the $scCO_2$ begin to penetrate into the rock and the initial injection pressure (> 100 bar) of $scCO_2$ into the rock was measured for each rock. The mineralogical compositions of mudstones after 90 days reaction were similar to those before the reaction, suggesting that the mudstone in the Janggi basin has remained relatively stable for the $scCO_2$ involved geochemical reaction. The initial $scCO_2$ injection pressure (${\Delta}P$) of a tuff in the Janggi basin was 15 bar and the continuous $scCO_2$ injection into the tuff core occurred at higher than 20 bar of injection pressure. For the mudstone in the Janggi basin, the initial $scCO_2$ injection pressure was higher than 150 bar (10 times higher than that of the tuff). From the results, the mudstone in Janggi basin was more suitable than the tuff to shield the $scCO_2$ leakage from the reservoir rock at subsurface.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.66-66
• /
• 2010

야외지질학습은 교실에서 경험할 수 없는 물질과 현상을 관찰하고 직접 경험할 수 있는 기회를 제공받을 수 있어서 매우 중요하다(Orion 1989). 또한 체험활동으로서 교실에서 학습한 내용의 구체적인 예를 제공하여 교육과정을 촉진시키는데 중요한 요소로 인식되고 있다. 일반적으로 야외 활동은 교실 활동보다 학생들의 경험과 훨씬 더 밀접히 관련되어 있기 때문에 보다 의미가 있을 수 있다. 야외실습 중에서 얻은 경험은 학생들이 그가 관찰한 것에 대해 읽도록 동기화시키고, 교과서와 자연조건에서의 실제적 경험 사이의 차이를 연결해 주는 다리를 제공해 줄 수 있다(홍정수, 장남기, 1997). 야외학습을 위한 적절한 장소는 먼저 학습주제나 목표와 부합되는 곳이어야 하며, 지리적으로 가깝고 안전한 곳이어야 한다(김찬종, 2008). 그렇기 때문에 각 지역별로 학습주제와 부합된 지역을 선정하여 야외지질 학습자료를 개발하는 것은 무엇보다 중요하다. 따라서, 본 연구에서는 전북 남원 일대를 중심으로 한 야외지질 학습자료를 개발하는데 그 목적이 있다. 전북 남원지역은 한반도의 중요지괴에 해당하는 영남육괴 지리산지구에 해당하며 편마암 복합체를 기저로 이를 관입하는 수 차례의 화성활동과 지구조운동으로 복잡한 지질양상을 보인다. 또한 지리산 지역은 평안분지와 경상분지의 일부가 보존되어 있고 지질시대를 달리하는 각종 화성암류가 골고루 분포하여 각 지질시대별로 화성활동과 지구조 운동이 활발했음을 시사해준다. 본 연구에서는 남원 지역의 지질학적 특징을 관찰하기 용이한 지역을 대상으로 총 5곳을 선정하였다. 남원 시내에 소재한 춘향대교 아래 지역은 중생대 쥐라기에 관입한 저반상의 남원화강암과 페그마타이트가 다수 분포하는 곳이다. 이 지역에서는 무수히 많은 관입암체를 찾을 수 있는데 다수의 지진과 지각변동이 있었음을 알 수 있다. 두 번째 장소는 다양한 바위들을 관찰할 수 있는 구룡계곡 일대이다. 이 장소는 오랜기간 동안 물의 흐름에 의해 풍화와 침식을 받은 다양한 크기의 바위를 관찰하고 구별함으로써 풍화에 따른 원마도의 관계, 바위들의 배치 형태를 통해 고지형 및 고수류의 방향을 유추해 볼 수 있다. 남원에서 장수 방향에 위치한 만행산 주변에는 흑운모편마암에 우세한데, 이 지역에서는 흑운모편마암에 나타나는 변성구조로 볼 때 높은 열과 압력을 받은 광역변성작용을 받는 것으로 판단된다. 또한 관입암체 내에 다양한 맥들이 관입을 해와 이를 통해 관입암체들의 상대연령을 판단해보는 학습자료로 활용될 수 있다. 네 번째 장소는 남원시 인월면 인풍리 소재의 인월 피바위 지역이다. 이 지역에서는 압쇄상 화강암이 주로 관찰되는데 이는 기원암인 반상화강암이 동력변성작용을 받아 생성된 것이다. 다섯 번째 지역은 지리산 내의 뱀사골로 지리산 인근에 분포하는 대표적인 편마암인 반상변정질 편마암을 관찰할 수 있다. 변정이란 변성작용을 받는 동안 형성되는 것으로 변성작용을 받는 동안 생긴 것도 있으나 경우에 따라 생성당시 원래 모암속에 포함되어 있는 반정들도 있다.

• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.405-415
• /
• 2019

The cracks induced by hydraulic rock splitting technique are formed in the direction parallel to the free plane, which is perpendicular to the minimum principal stress of the ground, or is affected by the pre-existing microcracks. In this study, the hydraulic rock splitting experiments were conducted in which the guide slot was engraved in the direction parallel to the borehole axis on the biotite granite slope, and the hydraulic pressure was injected through the double packer pressure and interval section. The test results show that the cracks along with the guide slots were induced either by the double packer pressurization or the injection of hydraulic pressure into interval section, some cracks extended across the boreholes. Therefore, the hydraulic rock splitting test is expected to control efficiently the induced cracks if the guide slots are engraved in the direction of splitting and a big flow rate is applied.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.213-220
• /
• 2010

The permeability characterization on the natural barrier for deep geological disposal of radioactive waste is very critical to evaluate total safety and performance assessment of disposal site. However, the confidence level in using previous hydraulic testing equipments consist of simple components to estimate rock mass permeability is not high enough to reflect in situ condition. The purpose of this research is to establish an advanced hydraulic testing equipment, which is applicable to deep borehole (up to 1,000 m), through the improvement of technical problems of previous packer systems. Especially, the straddle packer hydraulic testing equipment was designed to adopt both the hydraulic downhole shut-in valve(H-DHSIV) to minimize the wellbore storage effect and the real time data acquisition system to measure the pressure changes of test interval including its upper and lower parts. The results from this research lead to not only improve current technical level in the field of hydraulic testing but also provide important information to radioactive waste disposal technology development and site characterization project.

• The Journal of Engineering Geology
• /
• v.6 no.2
• /
• pp.53-58
• /
• 1996

In order to investigate the source mechanism of micro cracks through acoustic emission measurement induced by rock fracture, careful calibration of the entire linkage of the detecting system, from the transducers to transient recorder, is an essential requirement prior to testing. Transducers and digitiging system are generally the weakest links in the measurement system because they must translate mechanical motions into digital electric signals. In this study, PAC piezoelectric pressure transducers are calibrated with a standard NBS conical shaped displacement transducer and a DG piezoelectric displacement transducer. The NBS and PAC transducers are insensitive to changes in horizontal impingement angle but sensitive to changes in incident angle. The ray path along the logitudinal axis of the tranducer produced a maximum response while the ray path perpendicular to the transducer axis gave a minimum. And a difference in individual transducers factor for a peak-to-peak amplitude of PAC transducers was within 40%. An average PAC transducer coefficient was determined as 77mv/pm by an absolute calibration test using NBS transducer.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.509-515
• /
• 2017

Quartz is the most abundant mineral in the Earth's continental crust. Therefore, understanding of quartz dissolution and precipitation is very important to know about weathering processes and interactions between rocks and water in hydrothermal and metamorphic environments. This paper presents a basic review on the research about quartz dissolution mechanism under various physico-chemical conditions. We rearranged the relationship between each physico-chemical factor and dissolution mechanism from the results of previous researchers in this paper. From this result, we understood that quartz dissolution and precipitation are affected by each factor such as temperature, pH, and applied stress conditions at contact point. In particular, we recognized that the high pH and temperature conditions have different anion concentrations on mineral's surface. As a result, high pH and temperature conditions have a better effect than applied stress condition to the quartz dissolution mechanism.

• Tunnel and Underground Space
• /
• v.20 no.6
• /
• pp.446-454
• /
• 2010

CAES-G/T (Compressed Air Energy Storage - Gas Turbine) power generation is a likely option for the buffer facility stabilizing the fluctuation of the renewable powers, such as wind and solar powers. Considering the geological conditions, the underground CAES facility is most probable if the CAES-G/T generation is planed in Korea. In this kind of facility, a concrete plug is installed to seal the compressed air in the container, so that the selection of the shape and dimension of concrete plug could be a critical design factor. The stability evaluation of two types of plug was carried out by investigating the distribution of the factor of safety in the plugs and the distribution of contact pressure over the contact surface. The analysis result shows that the taper-shaped plug is more structurally stable than the wedge-shaped plug for the given geological condition. Possible separation of the rock-concrete interface around the spring line of the wedge-shaped plug is anticipated, which means the possible leakage of compressed air through the side wall and also means the poor mobilization of frictional resistance on that area.

• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.7-16
• /
• 2008

Limestone area have mostly certain geological defects such as the internal cavities due to melting and fractured zone by external pressures. Especially, in case of constructing grand bridge, the treatment of the limestone cavities area having the geological defects is inevitable. In order to reduce foundation settlement and to reinforce the ground in the limestone cavities area, high pressure jet grouting has been carried out as a countermeasure method. Despite the fact that high pressure jet grouting method has already adopted at a lot of limestone cavities area, but the amount of research and technical data on the high pressure jet grouting have not been accumulated properly so for. Therefore this paper intends to investigate the strength characteristics and deformation characteristics for reinforced limestone cavities area by high pressure jet grouting method. In addition, load carrying capacity obtained by static pile load test with load transfer measuring system is analyzed.

• The Journal of Engineering Geology
• /
• v.2 no.1
• /
• pp.58-69
• /
• 1992

Change in atmospheric pressure produce sizable fluctuafions in wells penetrafing confined aquifers. The relationship is inverse; that is, increases in atmospheric pressure produce decreases in water levels, and conversely. When atmospheric pressure changes are expressed in terms of a column of water, the raflo of water level change to pressure change expresses the barometric efficiency of an aquifer. In the study area, aquifers are developed in the fractures, joints, bedding planes and occasionally in solufion cavities of marl interbeds. The barometric efficiency of the aquifer varies from 8 to 90%, indicating that Confined, Unconfined and Semi-Confined condifions exist locally. The barometric efficiency is characteristic of the aquifer itself and observed in the field is inversely proportional to specific storage or the storage coefficient. It is remalned in question to derive the relationship between B.E. and S.

• Economic and Environmental Geology
• /
• v.27 no.5
• /
• pp.459-467
• /
• 1994

The Gadaeri granite near Ulsan mine is an oval-shape isolated granitic body, and is genetically related to the iron-tungsten mineralization. The Gadaeri granite exhibits calc-alkaline and I-type characteristics, and generally shows the micrographic texture which indicates the shallow depth of emplacement. Consideration of the stratigraphic thickness of Ulsan formation and minimum-melt compositions suggests that the bulk magma crystallized at pressure of 0.5~2.0 kbar under water saturated condition. The evolutionary trend observed in the studied rocks represents that feldspar fractional crystallization has been a major magmatic process at the Gadaeri granite pluton. Different chemical characteristics between the Gadaeri and the Masan-Kimhae granites cannot be explained by fractional crystallization or different degrees of partial melting, and it reflects that the magma source for Gadaeri granite was different from that of the Masan and Kimhae granites.