• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.109-119
• /
• 2022

The computational efficiency of reverse time migration (RTM) based on numerical modeling is not secured due to the high-frequency band of several hundred Hz or higher for data acquired through a three-dimensional (3D) ultra-high-resolution (UHR) seismic survey. Therefore, this study develops an RTM program to derive high-quality 3D geological structures using UHR seismic data. In the traditional 3D RTM program, an excitation amplitude technique that stores only the maximum amplitude of the source wavefield and a domain-limiting technique that minimizes the modeling area where the source and receivers are located were used to significantly reduce memory usage and calculation time. The program developed through this study successfully derived a 3D migration image with a horizontal grid size of 1 m for the 3D UHR seismic survey data obtained from the Korea Institute of Geoscience and Mineral Resources in 2019, and geological analysis was conducted.

• The Journal of Engineering Geology
• /
• v.7 no.3
• /
• pp.207-216
• /
• 1997

Estimation of loads on tunnel lining is one of the major issues to be addressed in the design of a tunnel. The existing analytical methods do not consider important details of construction and the variation of geology along the tunnel axis. The measured loads obtained from several sanitary and subway tunnels in Edmonton, Alberta, Canada, are compared with the lining loads calculated using the existing analytical methods. However, the existing methods are determined to be not fully satisfactory for the estimation of lining loads. To account for face and heading effects occurring prior to lining installation, the stress reduction factor determined using Eisenstein and Negro's method is used coupled with an analytical solution for calculation of lining loads.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.267-270
• /
• 2002

금정터널 굴착 공사의 실시 설계를 위하여 굴착시 발생하게될 터널내로의 지하수 유출과 관련된 수리지질학적 특성을 연구하였다. 단열들에 대한 정보를 얻기 위하여 지표지질조사 및 지질구조조사를 실시하였다. 연구지역의 투수성을 파악하기 위하여 토양의 물리적, 공학적 특성을 규명하였고, 또한 정압주입시험을 실시하였다. 선구조선의 우세방향은 북북동-남남서 방향으로 동래단층 및 동래단층과 관련된 단층군들이 포함된다. 토양시료의 시험결과, 산정된 수리전도도는 2.l9E-05 m/sec ~ 2.11E-04 m/sec 로서 투수성이 빠름 ~ 매우 빠른 범위 값을 갖는 것으로 나타났다. 주입시험에 의해 산정된 수리전도도는 2.28E-10 m/sec ~ 1.49E-06 m/sec 로서 최대값과 최소값은 4 차수(four order)의 차이를 보였다.

• The Journal of Engineering Geology
• /
• v.7 no.1
• /
• pp.1-10
• /
• 1997

The construction of Kyungbu canal connecting Han and Naktong rivers is needed to facilitate the carriage of goods and enhance the economic growth. The two rivers are liflked by the Choryeong tunnel with 20.5 km length and 125 m altitude. Seven locks involving of 25 m lifting height are planned to reach the tunnel from Shingok dam along the Han river. The tunnel and dams are located favorably by topographic and geologic map analysis. The water needed to fill the chamber of high lock will he supplied by construction of additional dams above Chungju-dam and/or intmduction of water-saving lock system.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.85-89
• /
• 2019

Cell-free protein synthesis utilizes the translational machinery in a cell extract. Unlike the conventional cell-based expression methods, not being affected by the conditions for cell growth, cell-free protein synthesis enables flexible manipulation of individual factors affecting the efficiency protein biosynthesis. However, the high cost and low stability of the energy sources to regenerate ATP have limited the use of cell-free synthesis for large-scale production of recombinant proteins. One of the approaches to address this problem is to use glucose as an alternative energy source to regenerate ATP through the glucose-metabolizing pathways in a cell extract. In this study, in an attempt to improve the efficiency of ATP regeneration by reinforcing oxidative phosphorylation process, we supplemented with cellular lipids to a glucose-fueled reaction mixture for cell-free protein synthesis. As a result of the lipid supplementation, the productivity of chloramphenicol acetyltransferase in a cell-free synthesis system using glucose increased more than 6 fold compared to when the lipid was not supplemented.

• The Journal of Engineering Geology
• /
• v.16 no.1 s.47
• /
• pp.23-30
• /
• 2006

This study was carried out to understand the relationship between orientation of tecto-lineaments obtained from aero-photograph and orientation of discontinuities measured at field for the rock types of igneous, sedimentary and metamorphic rocks in Andong area. Total 847 tecto-lineaments were extracted from the aero-photographs and total 1,940 discontinuities including joints, foliations and faults were measured during geologic survey. By using the software DIPS, preferred trends of tecto-lineaments were deduced as N30E-N40E for igneous rocks and N50E-N60E for both sedimentary and metamorphic rocks, while the trends of discontinuities were found as N40E-N50E for igneous rocks, N50E-N80E for sedimentary rocks and N50E-N60E for meta morphic rocks. Even though both orientations for a given rock type showed relatively good agreement in its trend, some discrepancy is also appeared. Since construction safety of geo-structures such as tunnel and slope, etc., is significantly affected by the orientation of discontinuities in rock masses, it is highly recommended to perform a detailed geologic survey as well as an aero-photograph interpretation at a design stage.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.501-509
• /
• 2008

It is very important in designing civil engineering structures that the quantification of geological informations must be carried out in terms of importance. In this study, the geological informations are quantified and evaluated using analytic hierarchy process (AHP). A professional group was organized with 30 people in the field of civil engineering, transport, and geology. On the assumption that the civil engineering structure is linear such as highway or railroad, a survey of the group in terms of geological and hydro-geological elements has found that the hierarchy structure is composed of four levels. And fault structure is a primary factor which causes the stability of a linear civil engineering structure. The importance of geological items are arranged with fault (0.456), foliation/bedding plane(0.l65), lineation(0.144), ground water(0.124), and rock type(0.111).

• The Journal of Engineering Geology
• /
• v.34 no.1
• /
• pp.13-24
• /
• 2024

The purpose of this study is to identify the geology, geologic structure, hydrogeology and geomorphic characteristics of the Nari Basin and establish the controls on the discharge of water 20,000~40,000 m³/day from the Choosan Yongchulso, Ulleung Island, South Korea. Pumice and lapilli tuffs showing well-developed stratification are the predominant rock types surrounding the spring. The spring shows a structure whereby discharge occurs along a lens-like erosion cave formed by differential erosion of strata comprising tuff or pumice tuff. The Choosan Yongchulso is located at the point where the planation surface of the Nari Basin' ends and steep slopes begin. The basin is bounded on all sides by these steep slopes, except in the north, where the Choosan Yongchulso is located. Given these geomorphic characteristics, the Choosan Yongchulso is regarded as the ultimate outlet of the basin catchment area.

• Tunnel and Underground Space
• /
• v.31 no.3
• /
• pp.145-166
• /
• 2021

Korea Stress Map database is built by integrating actual data of 1,400 in-situ stress measurements using hydraulic fracturing and overcoring method in South Korea. Korea Stress Map 2020 is presented based on the guideline proposed by World Stress Map Project. As detailed data, stress ratio and maximum horizontal stress direction distribution for each region are also presented. The dominant maximum horizontal stress direction in the Korean Peninsula is from northeast to southeast, and the magnitude of the in-situ stress is relatively distributed. There is some stress heterogeneity caused by local characteristics such as topographical and geological properties. We investigated case studies in which the in-situ stress was affected by mountainous topography, difference in rock quality of fracture zone, presence of mine or underground cavities, and geological structure of fault zone.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.451-471
• /
• 2006

Major projects and research topics in the field of rock mechanics are analyzed to obtain the following results: $\cdot$ Rock mechanics deals with the behavior of deformation, failure and displacement of the rock and rock mass on the basis of geological basics. Discontinuities in the rock mass are the most important parameters to control the behavior of rock mass around underground openings. $\cdot$ The objective of site investigation and testing is to determine the strength properties of the rock mass and the in situ stress regime. Specimens for laboratory and in situ tests are to be selected in order that the results of the tests give the representative properties oi the rock mass of the site in question. $\cdot$ The result of a numerical model would be better evaluated not quantitatively but qualitatively. The displacement behavior of the rock mass has to be monitored properly for the NATM (New Austrian Tunneling Method) principles. $\cdot$ The stability of rock slope is to be evaluated preferably by back analysis with strength parameters, such as cohesion and friction angle.