• Journal of Korean Society for Geospatial Information Science
• /
• v.2 no.2 s.4
• /
• pp.143-151
• /
• 1994

3-D coordinates that result form GPS survey are not applied directly in korea because they are based on WGS 84 ellipsoid. Thus they must be transformed into longitude, latitude on the Bessel ellipsoid and orthometric height. Transformation parameters must be determined in order to perform the coordinate transformation. Also, coordinate transformation be preformed on longitude, latitude and ellipsoidal height. First estimation of Bessel geoidal height must be accomplished to acquire Bessel ellipsoidal height This paper suggests accuracy of coordinate transformation according to the estimation method of Bessel geoidal height. Also, This paper suggests that Bessel geoidal height have influence on the coordinates transformation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.155-161
• /
• 2001

When determining a three dimensional position for engineering purposes, we can use the GPS survey to find position. According to the enhancement of precision for domestic Geoid model, the positional accuracy of GPS about precise method of vertical position has been also increased. But by considering Geoid undulation, it is difficult to measure GPS-derived elevations. Because Geoid undulation has changed little in local sites, GPS-derived elevations are similar to orthometric height. By ignoring Geoid undulation, it is possible to measure GLT-derived elevations at the local. small construction sites. GLT(GPS Leveling Technique) provides a method for computing orthometric heights. GLT processes the data more rapidly than conventional measurement devices. We only considered the weight factors affecting accuracy between the points. That is, the GPS procedures to produce satisfactory elevation accuracy depends on the method of observations, receivers and conditions of the local environment. A comparison was performed between the GPS survey using Geoid model and GLT at a part within Pusan National University and construction model sites in South Korea. And the writers proved the GPS surveying is efficient in positioning accuracy, time, and cost on a construction sites.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.83-93
• /
• 2008

The topographic effect is one of the most important component in the solution of the geodetic boundary value problem (geodetic BVP). Therefore, topographic effect should be considered properly for developing the precise geoid model, especially for the area where contains many mountains like Korea. The selection of gravity reduction method in the context of the precise geoid determination depends on the magnitude of its indirect effect, the smoothness and magnitude of the reduced gravity anomalies, and their related geophysical interpretation. In this study, Korean digital elevation model with 100m resolution was constructed and topographic effect was calculated by three reduction methods as like Helmert condensation method and RTM method and Airy-isostatic reduction method. Through the analysis of computation results, we can find that RTM reduction method is the best optimal method and the results shows that gravity anomaly and indirect effect of geoidal height are $0.660{\pm}13.009mGal$, $-0.004{\pm}0.131m$ respectively and it is the most gentle slow of the three methods. Through this study, it was found that the RTM method is better suitable for calculating topographic effect precisely in context of precise geoid determination in Korea than other reduction methods.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.109-119
• /
• 2016

The height datum of Korea is currently separated into land and sea, which makes it difficult to acquire homogeneous and accurate height information throughout the whole nation. In this study, we therefore tried to suggest the more effective way to transform the height information were constructed separately according to each height datum on land and sea to those on the unique height datum using precise geoid models and tidal observations in Korea. For this, Anmyeon island was selected as a study area to develop the precise geoid models based on the height datums land (IMSL) and sea (LMSL), respectively. In order to develop two hybrid geoid models based on each height datum of land an sea, we firstly develop a precise gravimetric geoid model using the remove and restore (R-R) technique with all available gravity observations. The gravimetric geoid model were then fitted to the geometric geoidal heights, each of which is represented as height datum of land or sea respectively, obtained from GPS/Leveling results on 15 TBMs in the study area. Finally, we determined the differences between the two hybrid geoid models to apply the height transformation between IMSL and LMSL. The co-tidal chart model of TideBed system developed by Korea Hydrographic and Oceanographic Agency (KHOA) which was re-gridded to have the same grid size and coverage as the geoid model, in order that this can be used for the height datum transformation from LMSL to local AHHW and/or from LMSL to local DL. The accuracy of height datum transformation based on the strategy suggested in this study was approximately ${\pm}3cm$. It is expected that the results of this study can help minimize not only the confusions on the use of geo-spatial information due to the disagreement caused by different height datum, land and sea, in Korea, but also the economic and time losses in the execution of coastal development and disaster prevention projects in the future.

• 한국해양학회지
• /
• v.22 no.1
• /
• pp.19-24
• /
• 1987

Gravity measurements at sea are considered to be made on the geoid. The free-air anomalies are then determined by subtracting the theoretical gravity values predicted on a reference ellipsoid from the observed values. The gravity effect due to the height difference between the geoid and reference ellipsoid and the mass between them is known as the 'indirect effect'. The result of applying the indirect effect to surface ship derived gravity anomalies in the North Atlantic Ocean demonstrates the importance of its inclusion for regional stuedies involving mantle processes.

• 한국해양학회지
• /
• v.29 no.4
• /
• pp.383-391
• /
• 1994

Sea surface height geoidal undulation, and gravity anomaly derived from satellite altimeter measurements are described. Assuming mean sea surface height (MSSH) as geoidal undulation, MSSH was converted to gravity anomaly. the result shows that the gravity anomaly derived from satellite altimeter data can be mapped to an accuracy of the surface ship gravity measurements. The data used for the conversion is the two-year mean sea surface height obtained from GEOSAT Exact Repeat Mission. The conversion was carried out using fast Fourier transform with plane approximation. In this process, the so called remove-restore method was employed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.385-392
• /
• 2005

This paper describes an accuracy analysis of newly developed gravimetric geoid and an improvement of developed geoid using GPS/Levelling data. We developed the KGEOID05 model corrected with the correction term. The correction term is modelled using the difference between GPS/Levelling derived geoidal heights and gravimetric geoidal heights. The stochastic model used in the calculation of correction term is the least squares collocation technique based on second-order Markov covariance function. 373 GPS stations were used to model the correction term. The standard deviation of KGEOID05 is about 11 cm and it indicates that we can be determined accurate heights ($2{\sim}3\;cm$) when we made precise modelling using KGEOID05 and a few GPS measurements for the local area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.95-106
• /
• 1994

The purpose of this paper is to establish the optimum reference field as testing some geopotential model, gravity data and GPS data. We have to decide a best fitting geopotential model as a reference surface for establishing the optimum geoid solutions. We conduct some tests on the Korean Peninsula gravity data to establish which of the model would be prove to be the best one. Three ways were used to compare the geopotential coefficient solutions. One of the tests is to compare the residual gravity anomaly remaining after the anomaly computed from the geopotential model has been subtracted from the "observed" gravity anomaly. The second method is a comparison of several geopotential solutions in terms of differences in gravity anomalies and quasi-geoid undulations. The third method is a comparison between the undulation obtained by GPS and the corresponding undulation from each geopotential model. The result showed that OSU91A model is a best fitting model as a reference in the region of Korean Peninsula.Peninsula.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.274-280
• /
• 2008

The new high order Earth's gravity Model(EGM2008) are expected to improve the application about the Earth's global gravity field. The objectives of this research are to present characteristics on the geoid heights of provinces in South KOREA which calculated from the height anomalies by Earth Gravity Models. For this, seven EGMs (EGM2008<2,190>, EGM2008<360>, EGM96, EIGEN-GL04C, EIGEN-CG03C, EIGEN-GL04S1, and ITG-Grace02S) selected. Geoid heights of fifty BM check points by GPS/levelling are compared with those by NORI-05 model and seven EGMs. And also, geoid heights of 30"$\times$30" grid points in land(sixes blocks ; $1^{\circ}\times1^{\circ}$ sampled) and sea (four blocks ; $1^{\circ}\times1^{\circ}$ sampled) areas of South KOREA by EGM2008 are compared with those by NORI-05 and six EGMs. The results show that geoid heights obtained from EGM2008(2,190) of NGA displayed the nearest results to those by GPS/levelling.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.1
• /
• pp.17-26
• /
• 1998

This paper deals with gravimetric geoid determination by Fast Hartely transform (FHT) technique in and around the Korean peninsula. A number of data files were compiled for this work, containing now more than 69, 001 point gravity data on land and ocean areas. Especially, regression was applied to estimate gravity anomalies in the northern area of peninsula. For evaluating accuracy of geoid obtained, GPS/Leveling data of 49 stations were prepared. EGM96 global geopotential model to degree 360 was used in order to determine the long wavelength effect of geoid undulations. By applying the remove-restore technique geoid undulations were determined by combining a geopotential model, free-air gravity anomalies. Fast Hartley Transform technique is a suitable solution that uses the advanced spectral technique on the sphere. It was applied to predict geoid undulations by Stokes's integral. Accuracy of geoid undulations was evaluated by comparing with results derived from GPS/Leveling. Standard deviation of differences is about 33 cm.