• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.13-19
• /
• 2007

This study relates to a new high-speed drive method for the full-HD PDP with 1080 horizontal scanning lines. The characteristics of the new drive method is evaluated considering the characteristics of the display discharge by the high-speed addressing. In this drive method, if the width of the address pulse narrows, the relati0[V]e discharge strength and the discharge time lag of the first display discharge are received the influence of it. Though the change in the applied position of the address pulse is unrelated to the discharge strength, it influences at the discharge time lag. However, the stable display discharges can be induced regardless of the address pulse position and width if the address pulse position is within [$6{\mu}s$] and the width is up to [$0.7{\mu}s$]. From the experiments, it has been understood that the high-speed drive technique with the address pulse of narrow width is sensitively influenced by the space charge because of the insufficiency of wall charge.

• Journal of Korea Multimedia Society
• /
• v.13 no.7
• /
• pp.1016-1022
• /
• 2010

Far-talking recognition and distributed speech recognition networking techniques are essential to control various and complex home services conveniently with voices. It is possible to control devices everywhere at home by using only voices. In this paper, we have developed the server-client DSP module for distributed speech recognition network system and proposed a new decision rule to decide intelligently whether to accept the recognition results or not by the transferred confidence rate. Simulation results show that the proposed decision rule delivers better performances than the conventional decision by majority rule or decision by first-arrival. Also, we have proposed the new interrupt-polling technique to remedy the defect of existing delay technique which always has to wait several clients' results for a few seconds. The proposed technique queries all client's status after first-arrival and decides whether to wait or not. It can remove unnecessary delay-time without any performance degradation.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.83-91
• /
• 2011

The accuracy of forecasting is remarkably important to reduce total cost or to increase customer services, so it has been studied by many researchers. In this paper, the artificial neural network (ANN), one of the most popular nonlinear forecasting methods, is compared with autoregressive integrated moving average(ARIMA) model through performing a prediction of container traffic. It uses a hybrid methodology that combines both the linear ARIAM and the nonlinear ANN model to improve forecasting performance. Also, it compares the methodology with other models in performance for prediction. In designing network structure, this work specially applies the genetic algorithm which is known as the effectively optimal algorithm in the huge and complex sample space. It includes the time delayed neural network (TDNN) as well as multi-layer perceptron (MLP) which is the most popular neural network model. Experimental results indicate that both ANN and Hybrid models outperform ARIMA model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2447-2458
• /
• 2009

Ad hoc wireless networks operate without any infrastructure where a node can be a source and a router at the same time. This indispensably requires high throughput and low delay performance throughout the wireless network coverage span, particularly under heavy traffic conditions. Recent research on using multiple antennas in beam-forming or multiplexing modes over a wireless channel has shown promising results in terms of high throughput and low delay. Directional antennas have shown to increase spatial reuse by allowing multiple transmitters and receivers to communicate using. directional beams as long as they do not significantly interfere with each other. However directional antenna performance asymptotically approaches the omni-directional performance in a high density ad hoc network. Simulation results in QualNet validate that average throughput and packet corruption ratio of directional antenna approach omni-directional performance. Moreover, we further highlight some important issues pertaining to the directional antenna performance in wireless networks.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.2
• /
• pp.305-314
• /
• 1996

In the paper, we divide the ATM cells generated by multimedia systems that want to transmit multimedia informations over B-ISDN into two categories:i)a media cell with a media information and ii) a synchronization cell with a synchronization information. We induce a media cell loss equation and a synchroni- zation cell loss equation based on probability distribution functions with on-off source as an input traffic model. In order to meet the requirements of real-time and integrity of multimedia informations, multimedia synchronization cells should provide the delay-sensitive and the loss-sensitive requirements. A traffic control mechanism needs to satisfy above requirements. According to the performance evaluation by a traffic control model simulation, we describe both spatial priority for minimizing the synchronization cell loss and temporal priority for reducing the synchronization cell delay must be applied simultaneously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.651-659
• /
• 2004

The Fast Handover protocol ［1］ provides seameless handover in wireless If networks by minimizing handover latency, which uses anticipation based on layer 2 (L2) trigger information. Therefore, it incurs higher signaling costs compared with the basic Mobile U protocol. Furthermore, since the L2 trigger is based on fluctuating wireless channel states, the handover anticipation may sometimes be incorrect. In the case of incorrect anticipation, unnecessary buffer space may be used for the purpose of providing a smooth handover. Therefore, it is essentical to analyze these overhead costs, in order to evaluate and compare the performance of Fast Handover with that of the basic Mobile U protocol. In this paper, we analyzed the overhead associated with Fast Handover including the signaling cost and the packet delivery cost. We formulated these costs based on a timing diagram and compared Fast Handover with basic Mobile Ipv6 in terms of their packet loss rates and buffer requirements. Also, we studied the impact of the L2 triggering time on the total overhead cost.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1675-1685
• /
• 2012

DVC (Distributed Video Coding) technique plays an essential role in providing low-complexity video encoder. But, in order to achieve the better rate-distortion performances, most DVC systems need feedback channel for parity bit control. This causes the DVC-based system to have high decoding latency and becomes as one of the most critical problems to overcome for a real implementation. In order to overcome this problem and to accelerate the commercialization of the DVC applications, this paper analyzes an effect of LDPCA frame size for adaptive LDPCA frame-based parity bit request estimations. First, this paper presents the LDPCA segmentation method in pixel-domain and explains the temporal-based bit request estimation method and the spatial-based bit request estimation method using the statistical characteristics between adjacent LDPCA frames. Through computer simulations, it is shown that the better performance and fast decoding is observed specially when the LDPCA frame size is 3168 in QCIF resolution.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.74-83
• /
• 1997

The definition of burning admittance and conventional n-$\tau$ stability rating technique are combined to investigate the high frequency combustion instabilities inside the cylindrical combustion chamber. Perturbed flow variables are written as the sum of fluctuating and time-averaged mean quantities on the assumption that the terms of the order higher than unity are sufficiently small, hence linearized governing equations could be formulated. Chamber admittances up and downstream of the flame front calculated with appropriate boundary conditions result in the burning admittance and corresponding n-$\tau$ neutral stability curve. Configurational and operational design factors are tested to detect the unstable wave-induced LOX-RP1 combustion instabilities. Operational design factors, e.g. pressure or O/F ratio, appear less influential to drive high frequency instability while the location of the flame front and configurational factors enhance or deteriorate the stabilities strongly. Conclusively, LOX-RP1 combustion inside the cylindrical combustion chamber is apt to be unstable against long residence time and shortened chamber length.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.67-73
• /
• 2005

The thickness of a Si3N4 thin film with a 100m nominal thickness was measured by use of a Mach-Zehnder interferometer. The map of the phase-delay through the thin film was obtained by an interframe intensity-correlation-matrix method that could elliminate phase-shifting errors. After the spatial phase-shifting errors were treated with a least-squares method, the reference to surface of the phase map was estimated. The overall accuracy of the method was found to be 5nm.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.83-91
• /
• 2001

This paper proposes the Focused beamforming to estimate the location of target residing near to the observation platform in the underwater environment. The Focused beamforming technique provides the location of target by the coherent summation of a series of incident spherical waveforms considering distinct propagation delay times at the sensor array. But due to the movement of the observation platform and the variation of the underwater environment, the shape of the sensor array is no longer to be linear but it becomes distorted as the platform moves. Thus the Focused beamforming should be peformed regarding to the geometric shape variation at each time. To estimate the target location, the artificial image plane comprised of cells is constructed, and the delays are calculated from each cell where the target could be proximity to sensors for the coherent summation. After the coherent combining, the beam pattern can be obtained through the Focused beamforming on the image plane. Futhermore to compensate the variation of the shape of the sensor array, the paper utilizes the Nth-order polynomial approximation to estimate the shape of the sensor array obeying the water pulley modeling. Simulation results show the performance of the Focused beamforming for different frequency bands of the radiated signal.