• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.1-7
• /
• 2002

This paper presents a new PLL clock generator that can improve a jitter noise characteristics and acquisition process by designing a multi-PFD(Phase Frequency Detector) and an adaptive charge pump circuit. The conventional PLL has not only a jitter noise caused from such a demerit of the wide dead zone and duty cycle, but also a long delay interval that makes a high speed operation unable. An advanced multi-structured PFD circuit using the TSPC(True Single Phase Clocking) circuit is proposed, in which it shows an excellent functionalities in terms of the jitter noises by designing its circuit with the exact dead zone and duty cycle. Our new designed adaptive charge pump in the loop filter of a PLL can improve an acquisition characteristic by adaptively increasing of current. The Hspice simulation is done to evaluate the performance of the proposed circuit. Simulation result shows that our PLL has under 0.01ns in the dead zone, no influence from the duty cycle of input signals and under 50ns in the acquisition time. This circuit will be able to be used in develops of high-performance microprocessors and digital systems.  

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.18-21
• /
• 2009

In the digital system, ROM has a large power-consumption and a speed-bottleneck. According to gradual growth of system speed, ROM is demanded to have low-power consumption and high-speed operation design. The ROM adapted in FFT or FIR filter needs method of sequential accessed addressing. We proposed a reduction method for the number of storage cells in this paper. The number of storage cells which is connected with bi-line is reduced by the proposed method so that the capacitance value of bit-time is reduced. In this case, delay time, and power consumption are reduced. Design result of ROM in this paper using the proposed method could reduce up to 86.3% of storage cell '1' compare with conventional method.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.4
• /
• pp.5-16
• /
• 2003

We have analyzed the performance of optical matched filters in the fiber-optic code division multiple access (FO-CDMA) system based on optical parallel coupler access encoder (PCAE) and parallel coupler access decoder (PCAD) by experiment. In previous studies, the performance evaluation of the FO-CDMA system using SCAE and SCAD was not sufficiently accurate because they analyzed system performance only considering the first order signals. Since optical SCAE and SCAD intrinsically have high order signals of various patterns as the number of coupler increases, they change auto- and cross-correlation intensities. Thus, it is necessary to investigate properties of the PCAE and PCAD so that we may analyze the exact performance of system. In this paper, it is found that the peak to sidelobe ratio using the PCAE and PCAD increases as $\alpha$ (coupling coefficient) value increases. Also, we found that the proposed PCAE and PCAD are superior to SCAE and SCAD in performance improvement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.277-283
• /
• 2016

In this paper, a system of self-interference signal cancelation for in-band full duplex has been implemented and tested in RF/analog region. The system performance has been evaluated with NI5791 platform and NI Flex RIO. Due to the low power level of the NI5791, the RF signal is amplified by SKYWORKS SE2565T power amplifier. A circulator is used to feed the antenna both the transmitter and receiver. The RF FIR filter is designed by twelve delay taps in two different groups, and the interval between each delay tap is designed to have 100 ps. The amplified signal is distributed to antenna and the FIR filter by use of a 10 dB directional coupler. The tap coefficients of the RF FIR filter are tuned to estimate the self-interference signal coming from antenna reflection and the leakage of the circulator, and the self-interference signal is subtracted. The system is test with 802.11a/g 20 MHz OFMD at 2.56 GHz, and the output power of the amplifier of 0 dBm. The self-interference signal is canceled out by 53 dB.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1025-1031
• /
• 2011

Take-out robots used for handling of the plastic parts manufactured with the injection mold are usually the gantry type that consists of long and thin links, The performance of the take-out robot is determined by the speed of the motion and the positioning accuracy to grab the part out of the mold, As the speed of the robot increases the flexure in the links of the take-out robot becomes more significant and it results in more residual vibration, The residual vibration deteriorates the positioning accuracy and compels the operator to slow down the motion of the robot. The typical method to reduce the vibration in the robot requires stiffening the links and/or slowing down the robot, Vibration control could achieve the desired performance without increasing the manufacturing cost or the operation cost that would be incurred otherwise, Considering the point-to-point nature of the task to be performed by the take-out robot the time-delay command (or input) shaping filter approach would be the most effective control method to be adopted among a few available control schemes. In this paper a direct adaptive command shaping filter (ACSF) algorithm has been modified and applied to design the optimal command shaping filters for various configuration of the take-out robot. Optimal filters designed by ACSF algorithm have been implemented on a take-out robot and the effectiveness of the designed filters in terms of vibration suppression has been verified for multiple positions of the robot.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.185-194
• /
• 2008

In this paper, an efficient technique is proposed to integrate the 3D user interface with the tiled display system in PC cluster environment. In the developed 3D user interface software, various menus are provided to increase the user friendliness of the interface, including the several model-control-commands. To eliminate the noise produced from the 3D user interface devices, the box filtering algorithm is employed. Further, a communication splitting algorithm, which is a kind of asynchronous communication method, is proposed to reduce the motion delay between the 3D interface and the tiled display system, and its efficiency is validated through the benchmarking tests.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.389-394
• /
• 2015

This paper considers the transfer alignment in the inertial navigation system which has lever-arm and the time delay in the velocity measurement. We suggest a method to improve the performance of the velocity matching. First, we analyze the estimation performance of the velocity matching through the tuning of the two covariance matrices of process noise and measurement noise. Next we provide some maneuvering conditions of the vehicles to improve the estimation performance using the observability analysis. The analysis results are verified using the computer simulations, which show that cruise movements do not provide the azimuth estimation of the vehicles, while east or north accelerating movement can provide.

• Journal of KIISE:Information Networking
• /
• v.29 no.5
• /
• pp.553-561
• /
• 2002

We present a novel service discipline, called linear service discipline, to serve multiple QoS queues sharing a resource and analyze its properties. The linear server makes the output traffic and the queueing dynamics of individual queues as a linear function of its input traffic. In particular, if input traffic is Gaussian, the distributions of queue length and output traffic are also Gaussian with their mean and variance being a function of input mean and input power spectrum (equivalently, autocorrelation function of input). Important QoS measures including buffer overflow probability and queueing delay distribution are also expressed as a function of input mean and input power spectrum. This study explores a new direction for network-wide traffic management based on linear system theories by letting us view the queueing process at each node as a linear filter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.529-536
• /
• 2003

In this Paper, a new DCT HLMS DFE(Discrete Cosine Transform Hierarchical Least Mean Square Decision Feedback Equalizer) algorithm is proposed to improve the convergence speed and MSE(Mean Square Error) performance of a receive channel equalizer in ATSC(Advanced Television System Committee) 8VSB(Vestigial Side Band) digital terrestrial TV system. The proposed algorithm reduces the eigenvalue range of input data autocorrelation by transforming LMS (Least Mean Square) DFE into the subfilter of hierarchical structure. Moreover, the use of DCT and power estimation algorithm makes it possible to reduce the eigenvalue deviation of input data which results from distortion and delay of the receive signal in the miulti-path environment. Simulation results show that proposed DCT HLMS DFE has SNR improvement of approximately 3.8dB, 5dB and 2dB as compared to LMS DFE when the equalized symbol error rate is 0.2 in ATTC defined digital terrestrial TV broadcasting channels A, B and F, respectively.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.121-130
• /
• 2004

In the application requiring the interoperability of different networks such as VoIP and wireless communication system, two speech codecs must work together with the structure of cascaded connection, tandem. Tandem has several problems such as long delay, high complexity and quality degradation due to twice complete encoding/decoding process. Transcoding is one of the best solutions to solve these problems. Transcoding algorithm is varied with the structure of source and target coder. In this paper, transcoding algorithm including the LSP conversion, the pitch estimation and new perceptual weighting filter for reducing complexity and improving qualify is proposed. These algorithms are applied to the pair of AMR md G.723.1. By employing the proposed algorithms in the transcoder, the complexity is reduced by about 20%-58% and quality is improved compared to tandem.